AMP Research PowerStep Automatic Electric Running Boards

1. Johdanto

The AMP Research PowerStep is an automatic, electric-powered running board system designed to provide convenient and safe vehicle access. These steps extend instantly when the vehicle door is opened and retract out of sight when the door closes, maintaining ground clearance and vehicle aesthetics. Constructed from die-cast aluminum alloy with stainless steel pivot pins, the PowerStep offers robust stability and all-weather performance.

Kuva 1: AMP Research PowerStep running boards in their retracted position, blending seamlessly with the vehicle's underside.

2. Turvallisuustiedot

• Anti-Pinch Technology: The PowerStep system is equipped with 'Anti-Pinch' technology. If an obstruction is detected during retraction, the steps will automatically stop and reverse direction to prevent injury or damage.
• Painorajoitus: Each step board is engineered to support a maximum load of 600 lbs. Do not exceed this weight limit.
• Teksturoitu pinta: The stepping surface features a textured, slip-resistant design for optimal traction in various weather conditions.
• LED-valaistus: Onboard LED lighting illuminates the step and the ground below, enhancing visibility during nighttime use.

3. Pakkauksen sisältö

Sinun AMP Research PowerStep package includes the following components:

• Two (2) PowerStep running boards (cab-length)
• Ajoneuvokohtainen johtosarja
• Asennuskannattimet ja laitteistot
• Ohjausmoduuli
• LED step lights
• Asennusopas

4. Asennus

The AMP Research PowerStep is designed for a professional-quality installation, which can be performed in your own driveway with the right tools and adherence to the provided instructions. A vehicle-specific installation guide and all necessary hardware are included.

1. Review Ohjeet: Thoroughly read the entire installation guide specific to your vehicle model before beginning.
2. Asennus: Attach the mounting brackets to the vehicle's frame using the provided hardware.
3. Johdotus: Connect the wiring harness to the vehicle's electrical system as detailed in the guide. This typically involves connecting to the vehicle's battery and door trigger wires.
4. Step Attachment: Securely attach the PowerStep boards to the mounted brackets.
5. LED valot: Install and connect the LED step lights to the wiring harness.
6. Testaus: Test the operation of the PowerSteps by opening and closing each door to ensure proper deployment and retraction.

Note: While designed for straightforward installation, professional installation is recommended for optimal performance and safety.

5. Käyttöohjeet

• Automaattinen käyttöönotto: The PowerSteps will automatically deploy when any vehicle door is opened.
• Automaattinen vetäytyminen: The PowerSteps will automatically retract approximately 3 seconds after all vehicle doors are closed.
• Manual Override (for cleaning/roof access): To keep the steps deployed for cleaning or accessing the vehicle roof, apply slight pressure to the step with your foot while closing the door. The step will remain extended until the door is opened again without pressure, or until the vehicle is driven.

Figure 2: The PowerStep automatically deploys when the door is opened, providing a convenient step.

6. Huolto

• Säännöllinen puhdistus: Keep the step surfaces clean from dirt, mud, and debris. The steps can be sprayed down and washed while deployed.
• Pivot Pin Inspection: Periodically inspect the stainless steel pivot pins for any signs of wear or corrosion. These pins are designed to be rust-proof for long-lasting operation.
• Voitelu: Apply a silicone-based lubricant to the pivot points annually or as needed to ensure smooth operation.

Kuva 3: Lähikuva view of the PowerStep's textured, slip-resistant surface and integrated LED lighting.

7. Vianmääritys

• Vaiheet, joissa ei ole käyttöönottoa/sisäänvetoa:
  1. Tarkista kaikkien sähköliitäntöjen tiiviys ja korroosio.
  2. Varmista, että ajoneuvon akussa on riittävästi virtaa.
  3. Inspect the steps for any physical obstructions that might be preventing movement.
  4. Verify the control module connections. In some cases, a faulty controller may need replacement (refer to customer support).
• Epätavalliset äänet: Lubricate pivot points as described in the Maintenance section. If noises persist, inspect for loose components or damage.

Lisäapua varten ota yhteyttä AMP Tutki asiakastukea.

8. Tekniset tiedot

9. Takuu ja tuki

AMP Research stands behind its products with a comprehensive 5 vuoden / 60 000 mailin takuu. For warranty claims, technical support, or any product-related inquiries, please refer to the contact information provided in your product packaging or visit the official AMP Tutkimus websivusto.