SATCO S8667 40W T5 Twin Tube CFL Lamp Käyttöopas

1. Johdanto

This manual provides essential information for the safe installation, operation, and maintenance of your SATCO S8667 40W T5 Twin Tube Compact Fluorescent LampLue nämä ohjeet huolellisesti ennen käyttöä ja säilytä ne myöhempää tarvetta varten.

Turvallisuustiedot

• Always disconnect power before installing or replacing the lamp.
• Älä käytä tätä lamp in enclosed fixtures unless specified by the fixture manufacturer.
• Handle with care to avoid breakage. This lamp contains mercury; dispose of properly according to local regulations.
• Ensure the lighting fixture is compatible with a 2G11 base and a 40W fluorescent lamp.

2. Tuote ohiview

The SATCO S8667 is a 40-watt Twin Tube Compact Fluorescent Lamp (CFL) designed for general lighting applications. It features a 2G11 lamp base and a T5 shape, providing 3500 lumens of neutral white light at a 3500K color temperature.

Tärkeimmät ominaisuudet:

• Wattage: 40W
• Voitage: 120V
• Perustyyppi: 2G11
• Muoto: T5 Twin Tube
• Lumen ulostulo: 3500 lumenia
• Värilämpötila: 3500K (neutraali valkoinen)
• Keskimääräinen elinikä: 20,000 tuntia

Figure 1: SATCO S8667 Twin Tube Compact Fluorescent Lamp. This image illustrates the lamp's twin tube design and 2G11 base connector.

3. Asennus ja asennus

1. Virran katkaisu: Before beginning installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
2. Valaisimen yhteensopivuus: Verify that your lighting fixture is designed for 2G11 base fluorescent lamps and can accommodate a 40W lamp.
3. Lamp Lisäys: Carefully align the four pins of the 2G11 base on the SATCO S8667 lamp with the corresponding slots in the fixture's lamp pidikettä. Paina varovasti l-painiketta.amp into the holder until it is securely seated. Do not force the lamp, koska se voi aiheuttaa vahinkoa.
4. Virran uudelleenkytkentä: Kerran lamp is securely installed, restore power to the fixture from the circuit breaker or fuse box.
5. Testaus: Turn on the light switch to confirm proper operation of the lamp.

Huomautus: Jos vaihdat olemassa olevan lamp, anna vanhan l:namp to cool completely before removal. Grasp the old lamp firmly and pull it straight out from the base to avoid bending the pins.

4. Käyttöohjeet

The SATCO S8667 lamp operates by simply applying power to the compatible fixture. Once installed, turn on the light switch to illuminate the lamp. Tämä lamp is designed for use with instant-start or rapid-start electronic ballasts. Refer to your fixture's specifications for ballast type compatibility.

The SATCO S8667 is a dimmable lamp. If your fixture and ballast are compatible with dimming functionality, the lamp's brightness can be adjusted using a suitable dimmer switch. Ensure the dimmer is specifically rated for fluorescent lamps to prevent damage or improper operation.

5. Huolto

Puhdistus:

To maintain optimal light output, periodically clean the lamp surface. Ensure the power is off and the lamp is cool before cleaning. Use a soft, dry, lint-free cloth to gently wipe the lampÄlä käytä nestemäisiä puhdistusaineita, hankaavia materiaaleja tai voimakkaita kemikaaleja, sillä ne voivat vahingoittaaampn pintaa tai sisäisiä komponentteja.

Lamp Korvaus:

The average rated life of the SATCO S8667 lamp on 30 000 tuntia. Kun lamp reaches the end of its operational life or fails, replace it by following the installation steps outlined in Section 3. Always ensure the power is disconnected before replacing the lamp.

Hävittäminen: Tämä lamp contains a small amount of mercury. Dispose of the lamp according to local, state, and federal regulations. Many communities have recycling programs specifically for fluorescent lamps to ensure environmentally responsible disposal.

6. Vianmääritys

• Lamp Ei syty:
  • Check if the power supply to the fixture is on at the switch and circuit breaker.
  • Varmista, että lamp is correctly and securely seated in the fixture's base.
  • Verify that the fixture's ballast is functioning correctly and is compatible with a 40W CFL.
  • Vaihda lamp with a known working one to rule out a defective lamp.
• Lamp Välkyntää:
  • Varmista, että lamp is fully inserted into the base.
  • Check for loose wiring in the fixture.
  • The ballast may be failing or incompatible with the lamp.
  • If using a dimmer, ensure it is rated for fluorescent lamps and is functioning correctly.
• Alennettu valoteho:
  • Puhdista lamp surface as described in the Maintenance section.
  • Lamp may be nearing the end of its operational life.
• Lamp Buzzes:
  • A persistent buzzing sound often indicates an issue with the ballast. Consult a qualified electrician for inspection and replacement if necessary.

7. Tekniset tiedot

8. Takuu ja tuki

For specific warranty information and technical support regarding your SATCO S8667 lamp, please contact Satco customer service directly or visit their official websivusto. On suositeltavaa säilyttää ostokuitti ostotodistuksena mahdollisten takuuvaatimusten varalta.

Valmistaja: SATCO Lighting

Websivusto: www.satco.com