Transmitter Solutions 433TSPW2K

Transmitter Solutions Monarch 433TSPW2K Garage Door Opener Remote Instruction Manual

1. Johdanto

The Transmitter Solutions Monarch 433TSPW2K is a two-button, programmable keychain garage door opener remote designed for reliable operation with compatible 433 MHz receivers. This manual provides essential information for setting up, operating, and maintaining your remote control.

Transmitter Solutions Monarch 433TSPW2K Garage Door Opener Remote

Image 1.1: The Transmitter Solutions Monarch 433TSPW2K remote, featuring two red buttons and a keychain attachment.

2. Turvallisuustiedot

  • Pidä kaukosäätimet poissa lasten ulottuvilta.
  • Do not operate the garage door opener if the door path is obstructed or if anyone is in the path of the door.
  • Only use this remote for its intended purpose of operating compatible garage door openers.
  • Hävitä paristot vastuullisesti paikallisten määräysten mukaisesti.

3. Asennus ja ohjelmointi

The 433TSPW2K remote requires programming to your garage door opener unit. The exact steps may vary slightly depending on your specific garage door opener model. Refer to your garage door opener's manual for precise instructions if these general steps do not apply.

Yleiset ohjelmointivaiheet:

  1. Etsi Opi-painike: On your garage door opener motor unit (usually mounted on the ceiling of your garage), locate the 'Learn' or 'Program' button. This button is often colored (e.g., red, orange, purple, green, or yellow) and may be behind a light cover.
  2. Aktivoi oppimistila: Press and immediately release the 'Learn' button on your garage door opener. The LED indicator light next to the button will typically illuminate or flash, indicating that the opener is in programming mode. You usually have about 30 seconds to complete the next step.
  3. Kaukosäätimen ohjelmointi: Within the 30-second window, press and hold the desired button on your Transmitter Solutions 433TSPW2K remote control.
  4. Vahvista ohjelmointi: Continue holding the remote button until the garage door opener's light flashes or you hear a click. This indicates that the remote has been successfully programmed.
  5. Testaa kaukosäädintä: Release the button on the remote. Press the programmed button again to test its operation. The garage door should open or close.

If the remote does not operate the door, repeat the programming steps. Ensure you are within range of the garage door opener unit during programming.

4. Käyttöohjeet

Once programmed, operating your Transmitter Solutions Monarch 433TSPW2K remote is straightforward:

  • To open or close your garage door, simply press the programmed button on the remote control.
  • Ensure you have a clear line of sight to the garage door and that no obstructions are present before operating.

5. Huolto

Akun vaihto:

The remote control is powered by a small battery, typically a coin cell battery (e.g., CR2032) or a 12V A23 battery, though the specific type should be confirmed by opening the remote or checking internal markings. If the remote's range decreases or it stops working, the battery may need replacement.

  1. Avaa kaukosäädin Casing: Kampea varovasti kaukosäätimen kansi aukiasing. There may be a small notch on the side for this purpose. Use a small flat-head screwdriver or a coin.
  2. Irrota vanha akku: Note the orientation of the old battery (positive (+) and negative (-) terminals). Gently remove the old battery.
  3. Aseta uusi paristo: Insert a new battery of the same type and voltage, ensuring it is placed with the correct polarity.
  4. Sulje Casing: Napsauta kaukosäädintä casing takaisin yhteen tukevasti.
  5. Testaa kaukosäädintä: Test the remote to ensure it functions correctly after battery replacement.

6. Vianmääritys

OngelmaMahdollinen syyRatkaisu
Kaukosäädin ei toimiTyhjä akkuVaihda paristo (katso kohta 5).
Kaukosäädin ei toimiNot programmed or lost programmingRe-program the remote to your garage door opener (refer to Section 3).
Kaukosäädin ei toimiGarage door opener unit has no powerCheck the power supply to your garage door opener.
Rajoitettu toimintasädeHeikko akkuVaihda akku.
Rajoitettu toimintasädeHäiriö tai tukosEnsure no large metal objects or other radio frequency devices are interfering with the signal. Check the opener's antenna for damage or obstruction.

7. Tekniset tiedot

  • Malli: 433TSPW2K
  • Merkki: Lähetinratkaisut
  • Taajuus: 433 MHz
  • Painikkeet: Kaksi
  • Tyyppi: Avaimenperä kaukosäädin
  • Tuotteen paino: 1.6 unssia
  • Paketin mitat: 1 x 1 x 1 tuumaa (arvioitu)
  • Valmistaja: Lähetinratkaisut

8. Takuu ja tuki

For information regarding warranty coverage, technical support, or replacement parts, please refer to the official Transmitter Solutions websivustolla tai ota yhteyttä jälleenmyyjään, jolta ostit tuotteen. Säilytä ostokuitti takuuvaatimuksia varten.

Aiheeseen liittyvät asiakirjat - 433TSPW2K

Preview Lähetinratkaisut HIVE-1000 2 relevastaanotin: Käyttöohje ja tekniset tiedot
Yksityiskohtainen opas Transmitter Solutions HIVE-1000 2 Relay Receiverille, joka kattaa sen ominaisuudet, tekniset tiedot, asennuksen, käytön Bluetooth-mobiilisovelluksen kautta ja ohjelmoinnin.
Preview iGAZE RE KIT: Transceiver System for Resistive Safety Edges - Instruction Manual
This document provides instructions for the iGAZE RE KIT, a transceiver system by Transmitter Solutions designed for mechanical, 10kΩ, or 8.2kΩ resistive safety edges. It covers technical specifications, installation, configuration, programming, testing, troubleshooting, and FCC compliance for the TCOO900 transmitter and RCOO900 receiver, ensuring safe operation of automated gates and rolling doors.
Preview EIS-R Door Entry Unit User Manual - Transmitter Solutions
Comprehensive user manual for the Transmitter Solutions EIS-R Door Entry Unit. Covers installation, setup, features like Caller ID and Wiegand access control, intercom functionality, web server configuration, and warranty information.
Preview Transmitter Solutions Multi-Technologies Reader V1.1 User Guide
User guide for the Transmitter Solutions Multi-Technologies Reader V1.1, covering mounting, specifications, wiring, power-up sequences, and troubleshooting.
Preview Transmitter Solutions Pulse Mini Installation Manual
Installation and programming guide for the Transmitter Solutions Pulse Mini door control panel, covering features, specifications, wiring, and user management.
Preview Transmitter Solutions Red/Green Signaling Light - Product Information
Details on the Transmitter Solutions Red/Green Signaling Light, including technical specifications, wiring instructions, and operational guidance for model LEDSIGREDGRE.