Alpine SPS-600 6.5-inch Coaxial Car Speaker Instruction Manual

1. Johdanto

The Alpine SPS-600 is a 6.5-inch 2-way coaxial car speaker system designed to enhance your vehicle's audio experience. These speakers feature a robust design for clear sound reproduction and reliable performance. Key specifications include a power handling capacity of 80 Watts RMS (240 Watts Peak), a frequency response range of 70Hz to 22kHz, and a sensitivity of 88dB /W(1m).

2. Turvallisuustiedot

• Ammattimainen asennussuositus: If you are unfamiliar with car audio wiring and installation, it is recommended to seek professional assistance to prevent damage to the speakers or your vehicle.
• Irrota akku: Always disconnect the vehicle's negative battery terminal before beginning any electrical installation to prevent short circuits and electrical hazards.
• Oikea johdotus: Ensure all wiring connections are secure and correctly polarized. Incorrect wiring can lead to speaker damage or poor sound quality.
• Asennusturva: Securely mount the speakers to prevent them from becoming loose during vehicle operation, which could cause injury or damage.
• Vältä ylikuormitusta: Do not exceed the speaker's rated power handling capacity (80 Watts RMS / 240 Watts Peak) to prevent damage.
• Ilmanvaihto: Varmista riittävä ilmanvaihto kaiuttimien ja mahdollisten liitettyjen laitteiden ympärillä. ampnostimet ylikuumenemisen estämiseksi.

3. Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat ennen asennuksen aloittamista:

• Alpine SPS-600 6.5-inch Coaxial Speakers (Pair)
• Speaker Grilles (if included)
• Kiinnitysruuvit ja -klipsit
• Kaiutinjohto (jos mukana)
• Asennusmalli (jos mukana)

4. Asennus ja asennus

This section outlines the general steps for installing your Alpine SPS-600 speakers. Specific vehicle requirements may vary.

4.1. Valmistelu

1. Irrota ajoneuvosi akun negatiivinen napa.
2. Remove the existing speakers or trim panels to access the speaker mounting locations.
3. Inspect the mounting location for adequate depth and clearance for the new speakers. The SPS-600 speakers have a 6.5-inch woofer diameter and a 2.54 cm tweeter diameter.

4.2. Kaiuttimien asennus

The Alpine SPS-600 speakers are designed for coaxial car mounting.

1. Place the speaker in the desired mounting location. If using an installation template, mark and cut the opening as necessary.
2. Align the speaker's mounting holes with the vehicle's speaker mounts. If new holes are required, drill pilot holes carefully to avoid damaging vehicle components.
3. Kiinnitä kaiutin mukana toimitetuilla kiinnitysruuveilla. Älä kiristä liikaa.

Edessä view of the Alpine SPS-600 6.5-inch coaxial car speaker, showcasing sen suunnittelu ja komponentit.

4.3. Johdotusliitännät

The SPS-600 speakers utilize wired coaxial connectivity.

1. Connect the positive (+) terminal of the speaker to the positive (+) speaker output wire from your head unit or ampelävämpi.
2. Connect the negative (-) terminal of the speaker to the negative (-) speaker output wire from your head unit or ampelävämpi.
3. Varmista, että kaikki liitännät ovat tiiviit ja eristettyjä oikosulkujen välttämiseksi.

4.4. Viimeiset vaiheet

1. Reinstall any removed trim panels or grilles.
2. Kytke ajoneuvon akun negatiivinen napa takaisin.
3. Test the speaker functionality.

5. Käyttöohjeet

Once installed, the Alpine SPS-600 speakers operate as part of your vehicle's audio system. They are designed for stereo audio output.

1. Virta päälle: Turn on your vehicle's head unit or audio receiver.
2. Lähteen valinta: Select your desired audio source (e.g., radio, CD, MP3 player, smartphone connected to the head unit).
3. Äänenvoimakkuuden säätö: Gradually increase the volume to a comfortable listening level. Avoid excessively high volumes that cause distortion, as this can damage the speakers.
4. Ääniasetukset: Adjust bass, treble, balance, and fader settings on your head unit to optimize sound quality according to your preference. The SPS-600 features a bass boost capability, which can be further enhanced through head unit settings or an external ampelävämpi.

6. Huolto

Proper maintenance ensures the longevity and performance of your Alpine SPS-600 speakers.

• Puhdistus: Use a soft, dry cloth to gently wipe dust and debris from the speaker cones and grilles. Avoid using harsh chemicals or abrasive cleaners.
• Ympäristönsuojelu: While designed for vehicle use, avoid exposing speakers to excessive moisture or extreme temperatures. These speakers are not water-resistant.
• Säännöllinen tarkastus: Tarkista säännöllisesti kiinnitysruuvien kireys ja johtojen liitännät turvallisuuden varmistamiseksi.

7. Vianmääritys

If you encounter issues with your Alpine SPS-600 speakers, refer to the following common troubleshooting steps:

8. Tekniset tiedot

9. Takuu ja tuki

For warranty information and technical support, please refer to the official Alpine website or contact Alpine customer service directly. Keep your proof of purchase for warranty claims.

Alpinen asiakastuki: Refer to your product packaging or the official Alpine websivustolta ajantasaisimmat yhteystiedot.