Broan-NuTone BEL6 Bathroom Exhaust Fan with LED Light

1. Johdanto

The Broan-NuTone BEL6 Roomside Series ENERGY STAR bathroom exhaust fan with LED light is designed for versatile and easy installation, including retrofitting without attic access and no drywall cutting. This fan effectively reduces moisture and odors in bathrooms up to 45 sq. ft. with quiet operation at 0.9 sones. Its modern CleanCover grille offers a seamless design and simplifies cleaning.

Figure 1: Key features of the Broan-NuTone BEL6 Bathroom Exhaust Fan.

2. Turvallisuustiedot

VAROITUS: Vähennä tulipalon, sähköiskun tai henkilövahinkojen vaaraa noudattamalla seuraavia ohjeita:

• Katkaise aina virta huoltopaneelista ennen laitteen huoltoa tai puhdistusta.
• Asennustyöt ja sähköjohdotuksen saa suorittaa pätevä henkilö kaikkien sovellettavien koodien ja standardien mukaisesti, mukaan lukien paloturvalliset rakennusmääräykset ja -standardit.
• Käytä tätä laitetta vain valmistajan tarkoittamalla tavalla. Jos sinulla on kysyttävää, ota yhteyttä valmistajaan.
• Käytä suojalaseja asennuksen aikana.

3. Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

• Tuuletinkotelo
• Puhaltimen kokoonpano
• Johdotuspaneeli
• Johdinkotelo
• Kanavaliitin
• Ruuvit
• Mask (for drywall protection)
• Grille Trim
• Grille with LED Light Module

Kuva 2: Räjähtänyt view of the BEL6 fan components.

4. Tarvittavat työkalut

Asennukseen tarvitaan yleensä seuraavat työkalut:

• Porata
• Ruuvimeisseli
• Kaapeli Clamp Liitin
• Kanavatyöt
• Foil Tape
• Lankamutterit
• Suojalasit

5. Asennusohjeet

This section outlines the steps for installing your Broan-NuTone BEL6 exhaust fan. For a visual guide, please refer to the installation video below.

5.1. Yksikön valmistelu

1. Remove the blower assembly and wiring panel from the fan housing.

5.2. Mounting the Housing

2. Mount the fan housing securely to the ceiling structure using appropriate fasteners. The design features foldable mounting ears for versatile installation.

Kuva 3: Räjähtänyt view highlighting internal components and mounting features.

5.3. Duct Connector Installation

3. Install the duct connector with the included screws, ensuring the tabs engage in the housing.
4. Attach the ductwork to the connector using foil tape for a secure seal.

5.4. Johdotusliitäntä

5. Connect the electrical wiring according to local codes and the wiring diagram provided in the full manual.
6. Attach the wire enclosure by tab and screw, then reinstall the wiring panel and secure it.

5.5. Blower Assembly Installation

7. Install the blower assembly back into the housing and plug it in.

5.6. Grille and LED Module Installation

8. Once drywall is complete, install the grille trim.
9. Plug in the LED module.
10. Install the grille by sliding the clips into the grille trim. The patented SlideClip technology allows for fast, springless attachment.

Figure 4: Detail of the SlideClip grille for easy installation.

6. Käyttö

The Broan-NuTone BEL6 fan provides effective ventilation for rooms up to 45 sq. ft. Its 0.9 sones rating ensures quiet operation, making it barely noticeable while effectively removing moisture and odors. The integrated LED light provides illumination for your bathroom space.

Figure 5: The BEL6 fan installed in a bathroom ceiling.

7. Huolto

Regular cleaning helps maintain optimal performance and appearance. The CleanCover grille offers a seamless design that blends into the ceiling and is easy to clean. Simply remove the grille and wipe it down with a damp cloth. Ensure power is disconnected before any cleaning or maintenance.

Figure 6: The CleanCover grille provides a seamless look and is easy to maintain.

8. Vianmääritys

If the fan does not operate or the light does not turn on, check the following:

• Ensure the power supply is connected and the circuit breaker is on.
• Verify all wiring connections are secure and correctly installed.
• Check if the LED module is properly plugged into the blower assembly.
• Inspect for any obstructions in the fan or ductwork.

If issues persist, consult a qualified electrician or contact Broan-NuTone customer support.

9. Tekniset tiedot

Figure 7: Dimensions of the BEL6 fan unit.

10. Takuu ja tuki

For warranty information, technical support, or replacement parts, please refer to the official Broan-NuTone websivustolta tai ota yhteyttä heidän asiakaspalveluunsa. Säilytä ostokuitti takuuvaatimuksia varten.