Philips 7388 20 watin 6 voltin halogeenipolttimon käyttöohje

Johdanto

This manual provides essential information for the safe and effective use of your Philips 7388 20 Watt 6 Volt Halogen Bulb. Please read these instructions carefully before installation and operation to ensure optimal performance and longevity of the product.

The Philips 7388 halogen bulb is designed to produce a comfortable, warm white light, maintaining its luminous efficiency throughout its operational life. It features a G4 socket and is suitable for various lighting applications.

Turvallisuustiedot

Noudata aina seuraavia turvatoimia:

• Virta pois: Katkaise aina valaisimen virta ennen lampun asentamista, irrottamista tai puhdistamista.
• Käsittele varovasti: Halogen bulbs can become very hot. Allow the bulb to cool completely before handling.
• Vältä kontaktia: Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves if necessary.
• Oikea Voltage: Varmista, että kiinnittimen tilavuustage vastaa lampun tilavuuttatage (6 Volts). Using an incorrect voltagvoi vahingoittaa lamppua tai valaisinta.
• Oikea kiinnitys: Use only in fixtures designed for halogen bulbs and with appropriate wattage arvosanat.
• Hävittäminen: Hävitä käytetyt lamput paikallisten määräysten mukaisesti.

Asennus ja asennus

Noudata näitä ohjeita oikean asennuksen varmistamiseksi:

1. Vaihe 1: Virran katkaiseminen
   Ensure the power supply to the lighting fixture is turned off at the circuit breaker or by unplugging the fixture.
2. Step 2: Remove Old Bulb (if applicable)
   If replacing an existing bulb, allow it to cool completely. Gently pull the old G4 bulb straight out from its socket.
3. Step 3: Prepare New Bulb
   Carefully remove the new Philips 7388 bulb from its packaging. Avoid touching the glass envelope with bare hands. If you accidentally touch it, wipe it clean with a lint-free cloth moistened with rubbing alcohol.
4. Step 4: Insert New Bulb
   Align the two pins of the G4 bulb with the holes in the socket. Gently push the bulb straight into the socket until it is fully seated. Do not force it.
5. Vaihe 5: Palauta virta
   Kun lamppu on asennettu tukevasti, kytke valaisimeen virta takaisin.
6. Vaihe 6: Testaa
   Kytke valokytkin päälle varmistaaksesi, että se toimii oikein.

Käyttöohjeet

The Philips 7388 halogen bulb operates immediately upon receiving power. No special operating procedures are required beyond turning the fixture's power switch on or off.

• himmennys: If used with a compatible dimmer switch, the brightness of the bulb can be adjusted. Ensure the dimmer is rated for halogen or incandescent loads and matches the bulb's voltage ja wattage.
• Lämmöntuotto: Halogen bulbs produce heat. Ensure adequate ventilation around the fixture to prevent overheating.

Huolto

Minimal maintenance is required for the Philips 7388 halogen bulb.

• Puhdistus: If the bulb becomes dusty, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners directly on the bulb.
• Korvaus: When the bulb reaches the end of its life, replace it following the "Setup and Installation" steps. Always use a bulb with the same specifications (20W, 6V, G4 base) to ensure compatibility and safety.

Vianetsintä

If your Philips 7388 bulb is not functioning as expected, consider the following:

• Polttimo ei syty:
  • Tarkista, onko valaisimen virtalähde päällä.
  • Ensure the bulb is correctly seated in the G4 socket.
  • Inspect the bulb for any visible damage or a broken filament. If damaged, replace the bulb.
  • Testaa valaisinta tunnetusti toimivalla lampulla sulkeaksesi pois valaisinongelman.
• Lampun välkkyminen:
  • Ensure the bulb is fully inserted into the socket.
  • Tarkista kiinnikkeestä tai johdotuksesta löysiä liitoksia.
  • If using a dimmer, ensure it is compatible with halogen bulbs and not overloaded.
• Lyhyt polttimon käyttöikä:
  • Tarkista oikea tilavuustage (6V) is being supplied to the bulb. Overvoltagvoi lyhentää lampun käyttöikää merkittävästi.
  • Ensure the bulb is not being touched with bare hands during installation, as skin oils can cause premature failure.
  • Check for excessive vibration or heat in the fixture, which can shorten bulb life.

Tekniset tiedot

Key technical specifications for the Philips 7388 Halogen Bulb:

Takuu ja tuki

For warranty information or technical support regarding your Philips 7388 Halogen Bulb, please refer to the official Philips Lighting websivustolta tai ota yhteyttä suoraan heidän asiakaspalveluunsa. Säilytä ostokuitti ostotodistuksena.

You can visit the Philips Store for more information: Philips-kauppa Amazonissa