Global G-2

Global Knives 8" Chef's Knife G-2 Standard Instruction Manual

Model: G-2 | Brand: Global

Johdanto

The Global G-2 8-inch Chef's Knife is a versatile kitchen tool designed for mincing, cutting, chopping, and slicing. Manufactured in Japan, this knife features a blade crafted from high-tech molybdenum/vanadium stainless steel, known for its ability to retain a sharp edge. The blade is face-ground with a long taper, contributing to its lasting sharpness. The stainless-steel handle is molded for comfort and dimpled to provide a secure, slip-resistant grip. Its lightweight design and balanced construction, achieved by injecting sand into the hollow handle, enhance maneuverability. A finger notch between the blade and handle is incorporated for user safety.

Global G-2 8-inch Chef's Knife, front view

Kuva: Edessä view of the Global G-2 8-inch Chef's Knife, showcasing its sleek design and dimpled handle.

Tärkeimmät ominaisuudet

  • Lightweight, precisely balanced 8-inch (20cm) chef's knife.
  • Blade constructed from high-tech molybdenum/vanadium stainless steel.
  • Edge designed to retain razor sharpness exceptionally well.
  • Stainless-steel handle molded for comfort and dimpled for a safe grip.
Diagram illustrating Global G-2 Chef's Knife features

Image: Diagram highlighting key features such as hygienic one-piece structure, iconic design, rust resistance, 15° cutting edge, weighted hollow handle, and long-lasting edge retention.

Asennus

Alkupuhdistus

Before first use, hand wash the knife with warm, soapy water and dry it thoroughly. This removes any manufacturing residues and prepares the knife for use.

Käyttöohjeet

Yleinen käyttö

The Global G-2 Chef's Knife is designed for a variety of kitchen tasks. Use it for:

  • Jauhaminen: Finely chop herbs, garlic, or ginger.
  • Leikkaaminen: Prepare vegetables like onions, carrots, and celery.
  • Viipalointi: Cut meats, poultry, and larger vegetables with precision.
  • Valmistelutyöt: Handle general food preparation tasks efficiently.

Always use a stable cutting surface, such as a wooden or soft plastic cutting board, to protect the blade's edge.

Oikea kahva

Hold the knife with a firm but relaxed grip. The dimpled handle is designed to prevent slipping. For optimal control, grip the handle with your dominant hand, placing your thumb on one side of the blade and your index finger on the opposite side, just above the handle.

Global G-2 Chef's Knife in use, chopping an onion

Image: The Global G-2 Chef's Knife being used to chop an onion on a wooden cutting board.

Hoito ja huolto

Puhdistus

Vain käsinpesu: Global knives should be hand washed immediately after each use with warm, soapy water. Rinse thoroughly and dry completely with a soft cloth to prevent water spots and protect the edge. Älä pese astianpesukoneessa, as harsh detergents and high temperatures can damage the blade and handle.

Teroitus

To maintain the razor sharpness of your Global knife, use a ceramic sharpener or a diamond steel. These are recommended over traditional metal sharpening steels. For more intensive sharpening, a synthetic whetstone, ceramic whetstone, or a Shinkansen sharpener can be used. Global also offers a Sharpening Guide Rail to assist in honing blades at the proper angle.

Varastointi

Always store Global knives in a safe, dry environment. It is recommended to store them in a dedicated knife block or on a magnetic knife rack to protect the blade and prevent accidental injury.

Global G-2 Chef's Knife resting on a wooden cutting board

Image: The Global G-2 Chef's Knife on a cutting board, illustrating proper storage away from other utensils.

Vianetsintä

Dull Edge

If the knife's edge becomes dull, refer to the "Sharpening" section under Care and Maintenance. Regular honing and occasional sharpening will restore its cutting performance.

Ruostepisteet

Although made of stainless steel, prolonged exposure to moisture or harsh chemicals can lead to rust spots. Ensure the knife is thoroughly dried after washing and stored in a dry place. Minor rust spots can often be removed with a non-abrasive cleaner designed for stainless steel.

Tekniset tiedot

MallinumeroG-2
Terän materiaaliMolybdenum/Vanadium Stainless Steel
Kahvan materiaaliRuostumaton teräs
Terän reunaTavallinen
Terän pituus8 tuumaa (20 cm)
RakennetyyppiStamped
Tuotteen paino0.49 puntaa (7.8 unssia)
Astianpesukoneen kestäväEi (käsinpesu suositeltavaa)
ValmistajaYoshikin

Takuu ja tuki

The Global G-2 Chef's Knife comes with a lifetime warranty against defects and breakage. For warranty claims or product support, please contact Global customer service through their official websivustolle tai valtuutetuille jälleenmyyjille.

Aiheeseen liittyvät asiakirjat - G-2

Preview GLOBAL UP 1515 VF-AUT Yksineulainen tasomainen kävelyjalkainen ompelukoneen käyttöohje
Tämä kattava käyttöohje sisältää käyttöohjeet ja osatiedot GLOBAL UP 1515 VF-AUT -koneelle, joka on yksineulainen, tasomainen, sivuveitsellä varustettu kävelyjalkainen ompelukone. Tämä teollisuuskone on suunniteltu paksujen materiaalien, kuten autontyynyjen, sohvien, käsilaukkujen ja telttojen ompeluun. Se tarjoaa synkronoidun syöttön, tasaisen ompelun ja nopean, hiljaisen suorituskyvyn.
Preview GLOBAL WF 9221-76 -sarjan osakäsikirja | Kaaviot ja komponentit
Yksityiskohtainen osaluettelo GLOBAL WF 9221-76 -sarjan ompelukoneelle, joka sisältää kaavioita ja osaluetteloita teollisuusompelukoneiden varaosien tunnistamiseen ja hankintaan. Lisätietoja on osoitteessa www.globalsew.com.
Preview Global Tri-Temp Water Dispenser 670435 Instruction Manual
Official instruction manual for the Global Tri-Temp Water Dispenser (Model 670435), detailing setup, operation, maintenance, and troubleshooting procedures. Includes safety precautions and specifications.
Preview Global SV 550 -energiansäästöservomoottorin käyttöohje
Kattava käyttöohje Global SV 550 -energiansäästöiselle harjattomalle teollisuusompelukoneelle. Käyttöohje kattaa turvallisuuden, tuotteen esittelyn, asennuksen, parametrien asetukset, ympäristövaatimukset ja vianetsinnän.
Preview Global ZZ 1366-3S-76-P ompelukoneen käyttöohje ja osat
Tämä käyttöohje sisältää yksityiskohtaiset ohjeet ja osaluettelot Global ZZ 1366-3S-76-P -koneelle, joka on pitkävartinen, erittäin tehokas, yhdellä neulalla varustettu lukkotikki-siksak-ompelukone.
Preview Breezonic Performance- ja Performance Plus -ilmastointilaitteiden käyttöohjeet
Kattavat käyttöohjeet, huolto-opas ja tekniset tiedot Eberspacher Breezonic Performance- ja Performance Plus -ilmastointilaitteille, joita käytetään matkailuautoissa ja asuntovaunuissa.