Johdanto
Thank you for choosing the Altec Lansing ACS33 PowerCube Computer Speaker System. This 3-piece audio system is designed to provide high-quality sound for your computer, enhancing your audio experience with its compact satellite speakers and powerful subwoofer. This manual provides essential information for setting up, operating, and maintaining your speaker system.
The ACS33 system features two compact, magnetically shielded satellite speakers and a powered subwoofer. It includes convenient volume control and a power-on LED indicator for ease of use.
Image: The Altec Lansing ACS33 PowerCube 3-piece computer speaker system, showing the subwoofer and two satellite speakers.
Pakkauksen sisältö
Varmista, että pakkauksessa on kaikki seuraavat osat:
- Kaksi (2) satelliittikaiutinta
- One (1) Powered Subwoofer
- Integrated Cables for connection
- Käyttöohjeet (tämä käyttöohje)
_image_3.jpeg)
Kuva: Yläosa view of the Altec Lansing ACS33 PowerCube system, displaying the subwoofer and two satellite speakers with their connecting cables.
Asennusohjeet
Follow these steps to correctly set up your Altec Lansing ACS33 speaker system:
- Sijoitus: Position the subwoofer on the floor near your computer. Place the two satellite speakers on either side of your computer monitor, ensuring they are equidistant from your listening position for optimal stereo imaging. The satellite speakers are magnetically shielded to prevent interference with your monitor.
- Satelliittikaiuttimien liittäminen: Connect the cables from the two satellite speakers to the corresponding speaker output jacks on the back of the subwoofer. Ensure a secure connection.
- Yhdistä äänilähteeseen: Connect the audio input cable from the subwoofer to the audio output jack (typically green) on your computer's sound card.
- Virtaliitäntä: Plug the subwoofer's power cord into a standard AC wall outlet.
_image_1.jpeg)
Kuva: Takaosa view of the Altec Lansing ACS33 subwoofer, showing the input and output connections for the satellite speakers and the power input.
Käyttöohjeet
Once the system is set up, follow these steps to operate your speakers:
- Virta päälle: Locate the power/volume control knob on one of the satellite speakers. Turn the knob clockwise until you hear a click and the power-on LED illuminates.
- Säädä äänenvoimakkuutta: Continue turning the power/volume control knob clockwise to increase the volume. Turn it counter-clockwise to decrease the volume.
- Äänen toisto: Start playing audio from your computer. Adjust the volume to your desired listening level.
- Virta pois: To turn off the system, turn the power/volume control knob counter-clockwise until you hear a click and the power-on LED extinguishes.
Huolto
Proper care will ensure the longevity and performance of your speaker system:
- Puhdistus: Puhdista kaiuttimien pinnat pehmeällä, kuivalla liinalla. Älä käytä nestemäisiä puhdistusaineita tai hankaavia materiaaleja, sillä ne voivat vahingoittaa pintakäsittelyä tai sisäisiä komponentteja.
- Ilmanvaihto: Ensure that the subwoofer and satellite speakers have adequate ventilation. Do not block any vents, especially on the subwoofer, to prevent overheating.
- Ympäristö: Avoid placing the speakers in direct sunlight, near heat sources, or in areas with high humidity or excessive dust.
- Kaapelin hallinta: Keep cables tidy and free from kinks or excessive bending to prevent damage.
Vianetsintä
If you encounter issues with your ACS33 speaker system, refer to the following common problems and solutions:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Ei ääntä | Speakers not powered on; volume too low; incorrect audio connection; computer audio settings. | Ensure power is on and LED is lit. Increase volume. Check all cable connections. Verify computer's audio output is set to the correct device. |
| Vääristynyt ääni | Äänenvoimakkuus liian korkea; äänilähteen laatu huono; löysä yhteys. | Reduce volume. Test with a different audio source. Check all cable connections for tightness. |
| Only one satellite speaker works | Loose connection to subwoofer; computer's balance settings. | Check the connection of the non-working satellite speaker to the subwoofer. Verify computer's audio balance settings. |
| Surinaa tai surinaa | Ground loop interference; proximity to other electronic devices. | Try plugging the speakers into a different electrical outlet. Move speakers away from other electronics. |
Jos ongelma jatkuu näiden ratkaisujen kokeilemisen jälkeen, ota yhteyttä asiakastukeen.
Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Mallin nimi | ACS33 |
| Kaiuttimen tyyppi | Indoor, 3-piece system |
| Satellite Power | 10 Watts (per satellite) |
| Subwooferin teho | 15 wattia |
| Total Speaker Maximum Output Power | 35 wattia |
| Taajuusvaste | 70 Hz - 18 kHz |
| Signaali-kohinasuhde (S/N) | >65dB |
| Satellite Driver | One 3 inch full range driver (per satellite) |
| Subwooferin ohjain | One 4 inch long-throw woofer |
| Tuloimpedanssi | >10k ohmia |
| Yhteystekniikka | Langallinen |
| Virtalähde | AC (Built-in power supply) |
| Tuotteen mitat (subwoofer) | 17.6 cm S x 11.7 cm L x 8.6 cm K (noin) |
| Tuotteen paino | 10.85 kiloa |
| UPC | 021986940333 |
Takuutiedot
The Altec Lansing ACS33 PowerCube Computer Speaker System comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration of coverage. Keep your proof of purchase for warranty claims.
Asiakastuki
For technical assistance or customer service inquiries, please contact Altec Lansing support:
- Puhelin: 800-ALTEC-88
- Websivusto: www.altecmm.com
Please have your product model number (ACS33) and purchase information ready when contacting support.
