URIT PFS-30 Blood Lipid Analyzer User Manual

1. Johdanto

The URIT PFS-30 Blood Lipid Analyzer is a portable, easy-to-use device designed for the quantitative measurement of various blood lipid parameters. This 5-in-1 analyzer provides fast and accurate results for Total Cholesterol (TC), High-density Lipoprotein (HDL), Triglycerides (TG), Low-density Lipoprotein (LDL), and the TC/HDL Ratio. It is intended for in vitro diagnostic use by healthcare professionals and trained individuals for monitoring blood lipid levels.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your URIT PFS-30 Blood Lipid Analyzer. Please read it thoroughly before first use and keep it for future reference.

2. Tärkeitä turvallisuustietoja

Please observe the following safety precautions to ensure safe operation and to prevent damage to the device or injury to the user:

• This device is for in vitro diagnostic use only. Do not use it for self-diagnosis or to alter medication without consulting a healthcare professional.
• Always use URIT PFS-30 Blood Lipid Test Strips with the analyzer. Using other test strips may lead to inaccurate results.
• Pidä laite ja testiliuskat poissa lasten ulottuvilta.
• Dispose of used test strips, lancets, and other blood-contacting materials according to local regulations for biohazardous waste.
• Avoid extreme temperatures, humidity, and direct sunlight. Store the device and strips as recommended.
• Älä pura tai yritä korjata laitetta itse. Ota yhteyttä valtuutettuun huoltohenkilöstöön korjausta varten.
• Ensure hands are clean and dry before handling the device and test strips.
• Consult a healthcare professional for interpretation of results and medical advice.

3. Pakkauksen sisältö

Upon unpacking, verify that all items are present and undamaged. The standard package typically includes:

• URIT PFS-30 Blood Lipid Analyzer Unit
• URIT PFS 30 Blood Lipid Test Strips (quantity may vary by kit)
• Lancing -laite
• lansetit
• Kapillaariputket
• Code Card (for test strips)
• Käyttöopas (tämä asiakirja)
• Kantolaukku
• AAA Batteries (may or may not be included)

4. Tuote ohiview

The PFS-30A Blood Lipid Analyzer is designed for convenience and accuracy, offering a comprehensive lipid profile analysis from a single blood drop.

4.1 Tärkeimmät ominaisuudet

• 5-in-1 Mitta: Measures Total Cholesterol (TC), Triglycerides (TG), High-density Lipoprotein (HDL), Low-density Lipoprotein (LDL), and TC/HDL Ratio.
• Nopeat tulokset: Provides results in approximately 2 minutes.
• Suuri tarkkuus: Utilizes optical reflectance principle for reliable measurements.
• Käyttäjäystävällinen: Easy to operate with a large LCD screen for clear display.
• Tietojen tallennus: Stores up to 300 sample tuloksia.
• Tietojen lähtö: Supports USB and Bluetooth data transmission (Bluetooth available only for PFS-30 model).
• CHD Risk Assessment: Features FRA/PRO method for Coronary Heart Disease (CHD) risk evaluation.
• Laaja lämpötila-alue: Accurate operation across a wide range of ambient temperatures.
• Yhteensopiva tulostin: Can be connected to a compatible printer for result printouts.

5. Asennus

Before using the URIT PFS-30 Blood Lipid Analyzer, ensure it is properly set up.

5.1 Akun asennus

• Locate the battery compartment on the back of the analyzer.
• Avaa lokeron kansi.
• Aseta kolme (3) AAA-paristoa paikoilleen varmistaen oikea napaisuus (+/-).
• Sulje paristolokeron kansi kunnolla.

5.2 Initial Power On and Code Card Reading

Each new box of test strips comes with a code card. It is crucial to insert the correct code card into the analyzer before performing tests with a new batch of strips to ensure accurate results.

1. Laita päälle: Press and hold the power button (usually marked with a power symbol) on the analyzer. The device will power on and perform a self-check.
2. Read the Code Card: Insert the code card that comes with your test strip bottle into the code card slot on the analyzer. Ensure the code on the card matches the code printed on the strip bottle. The analyzer will automatically read the code.

6. Käyttöohjeet

Follow these steps to perform a blood lipid test using the URIT PFS-30 Blood Lipid Analyzer.

6.1 Preparing for a Test

• Ensure the analyzer has fresh batteries and the correct code card is inserted for the test strips you are using.
• Pese kätesi huolellisesti saippualla ja lämpimällä vedellä ja kuivaa ne sitten kokonaan.
• Prepare the lancing device with a new lancet according to its instructions.
• Have a clean, dry surface ready for the analyzer and supplies.

6.2 Testin suorittaminen

1. Insert the Test Strip: With the analyzer powered on and displaying a flashing strip symbol, carefully insert a new test strip into the strip port. The analyzer will beep and display a blood drop symbol when ready.
2. Kerää verta: Use the lancing device to prick the side of your fingertip to obtain a blood sample. Gently squeeze your finger to form a round drop of blood.
3. Add the Blood Drop: When the blood drop symbol is flashing on the screen, immediately apply the blood sample to the designated test hole on the test strip. Ensure the blood completely fills the sample area. Do not smear the blood.
4. Odota tuloksia: The analyzer will begin the measurement process. The result will be displayed on the screen within 2 minutes (120 seconds).
5. Lue tulos: Once the result is displayed, note down the values. The analyzer will show TC, HDL, TG, LDL, and TC/HDL Ratio.
6. Käytettyjen materiaalien hävittäminen: Carefully remove the used test strip and dispose of it, along with the lancet, in a suitable biohazard container according to local regulations.

Huomautus: For optimal accuracy, ensure the sample volume is between 35-40 µL. Capillary or venous whole blood can be used as a sample tyyppi.

7. Huolto ja varastointi

7.1 Cleaning the Analyzer

• Wipe the exterior of the analyzer with a soft, damp kangas.
• If necessary, use a mild detergent or a 70% ethanol solution for cleaning.
• Do not immerse the analyzer in water or any other liquid.
• Vältä käyttämästä hankaavia puhdistusaineita tai liuottimia, jotka voivat vahingoittaa laitetta.
• Ensure the test strip port is free of dust or debris. Use a soft brush if needed.

7.2 Varastointi

• Store the analyzer and test strips in a cool, dry place, away from direct sunlight and extreme temperatures.
• Keep test strips in their original sealed container and use them before the expiration date.
• If the analyzer will not be used for an extended period, remove the batteries to prevent leakage.
• Store the device in its carrying case to protect it from dust and physical damage.

8. Vianmääritys

If you encounter issues with your URIT PFS-30 Blood Lipid Analyzer, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact URIT customer support for further assistance.

9. Tekniset tiedot

10. Käyttäjävinkkejä

Re:ltä ei ollut saatavilla erityisiä käyttäjävinkkejä.views or Q&A for this product. However, general best practices for blood lipid testing include:

• Always follow fasting instructions from your healthcare provider before testing, especially for Triglycerides.
• Ensure your hands are warm before pricking your finger to improve blood flow and sample kokoelma.
• Avoid squeezing your finger excessively after pricking, as this can dilute the blood sample with interstitial fluid and affect accuracy.
• Keep a log of your results to track trends over time and share with your healthcare provider.

11. Takuu ja tuki

For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or contact the manufacturer/seller directly. Keep your purchase receipt as proof of purchase.