LASER TREE R1/R2 1064nm Infrared Laser Module Instruction Manual

1. Johdanto

Thank you for choosing the LASER TREE R1 or R2 1064nm Infrared Laser Module. This module is designed to provide precise and efficient engraving on a variety of materials, particularly excelling with metal and plastic surfaces where conventional diode blue lasers may struggle. This manual will guide you through the setup, operation, and maintenance of your laser module to ensure optimal performance and longevity.

2. Turvallisuustiedot

WARNING: LASER RADIATION. AVOID DIRECT EYE AND SKIN EXPOSURE TO LASER BEAM.

• Always wear appropriate laser safety goggles when operating the laser module.
• Ensure the work area is well-ventilated to dissipate any fumes produced during engraving.
• Never leave the laser module unattended during operation.
• Keep children and pets away from the laser engraving area.
• Do not attempt to disassemble or modify the laser module. This can expose you to hazardous laser radiation and will void the warranty.
• Ensure the laser module is securely mounted before operation.
• Be aware of the materials you are engraving. Some materials can produce toxic fumes or reflect the laser beam dangerously.

3. Pakkauksen sisältö

3.1 LT-R1 Packing List

Image: Contents of the LT-R1 package including the laser module, 3PIN cable, driver adapter, sliding plate, and accessories.

• Laser Module (LT-R1 1W IR)
• 3PIN kaapeli
• kuljettajan sovitin
• Liukuva levy
• Accessories for Sliding Plate

3.2 LT-R2 Packing List

Image: Contents of the LT-R2 package including the laser module, 3PIN cable, input cable, driver adapter, sliding plate, and accessories.

• Laser Module (LT-R2 2W IR)
• 3PIN kaapeli
• Tulokaapeli
• kuljettajan sovitin
• Liukuva levy
• Accessories for Sliding Plate

4. Asennus ja asennus

4.1 Lasermoduulin asentaminen

The LASER TREE R1/R2 modules are designed for easy integration into compatible engraving machines. Use the provided sliding plate and accessories to securely mount the module to your machine's gantry system.

4.2 Connecting the Adapter Cable

If you are installing the module on a LASER TREE engraving machine, use the appropriate R1 or R2 adapter cable for connection. Ensure all connections are firm and correct according to your engraving machine's manual.

Image: LT-R1 Adapter Cable (top) and LT-R2 Adapter Cable (bottom).

4.3 Quick Focusing

The module features a quick focusing mechanism. Utilize the focus bar by placing it down on your material to achieve the correct focal distance for optimal engraving results.

4.4 Red Dot Positioning

The integrated red dot positioning system helps determine the precise engraving or cutting starting position, minimizing errors and ensuring accurate placement of your designs.

Image: Close-up of the R2 module engraving, showing the red dot for positioning.

5. Käyttö

5.1 Materiaalien yhteensopivuus

The 1064nm infrared laser module offers significant advantages in engraving metal and plastic surfaces, which is often challenging for conventional diode blue lasers. It can engrave materials such as:

• Kupari
• Alumiini
• Musta akryyli
• Valkoinen muovi
• Bass Plywood
• And various other metals and plastics.

Image: Comparison of engraving results on Copper, Aluminum, Black Acrylic, White Plastic, and Bass Plywood using 1064nm IR laser vs. 450nm Diode Laser.

5.2 Engraving Detail and Efficiency

The choice between the 1W (R1) and 2W (R2) module depends on your specific needs:

• LT-R1 (1W): Offers more detailed engraving.
• LT-R2 (2W): Provides faster engraving speeds.

esimample, engraving a complex design might take 6 hours with the R1 module at 1200mm/min, while the R2 module could complete it in 4 hours at 1600mm/min, both at 100% power and 0.025mm interval (DPI: 1016).

Image: Comparison showing engraving time and module weight for R2 2W and R1 1W modules.

5.3 Luovat sovellukset

The LASER TREE infrared laser module allows for creative work without limitations of materials, enabling you to engrave intricate designs on various items such as jewelry, metal cards, and wooden crafts.

Kuva: Erilaisia ​​entisiäamples of items engraved with the laser module, including earrings, rings, metal wallets, and pendants.

6. Huolto

• Jäähdytysjärjestelmä: The module is equipped with a powerful fan for efficient heat dissipation. Regularly check the fan for any obstructions and ensure it is clean to maintain optimal cooling performance.
• Linssien puhdistus: Periodically inspect the laser lens for dust or debris. Clean gently with a lens cleaning solution and a microfiber cloth designed for optics. Avoid abrasive materials that could scratch the lens.
• Yleinen puhdistus: Keep the exterior of the laser module clean and free from dust and engraving residue. Use a soft, dry cloth.
• Varastointi: When not in use, store the laser module in a dry, dust-free environment.

7. Vianmääritys

7.1 No Laser Output

• Tarkista kaikki kaapeliliitännät varmistaaksesi, että ne ovat kunnolla kiinni.
• Varmista, että virtalähde on kytketty oikein ja että se antaa määritetyn jännitteen.tage (24 V tasavirta).
• Ensure the engraving software settings are correct and the laser is enabled.
• Check for any error indicators on the laser module or your engraving machine.

7.2 Poor Engraving Quality

• Painopiste: Re-check the focus of the laser module using the quick focusing bar. Incorrect focus is a common cause of poor quality.
• Nopeus-/tehoasetukset: Adjust the engraving speed and power settings in your software. Different materials require different parameters.
• Materiaali pinta: Ensure the material surface is clean and flat.
• Lens Condition: Inspect the laser lens for dirt or damage and clean if necessary.

7.3 Ylikuumeneminen

• Ensure the cooling fan is operating correctly and is not obstructed.
• Clean any dust or debris from the fan and heatsink fins.
• Operate the module within its specified operating temperature range (0-60°C).

8. Tekniset tiedot

Image: Detailed product parameter table for LT-R1 and LT-R2 modules.

9. Käyttäjävinkkejä

• Yhteensopivuus: Many users inquire about compatibility with various engraving machines (e.g., TTS 20 Pro, K1 10W 12V, Daja A6pro, Sculpfun S9, Neje 3 Max V2). Always verify the input voltage, current, and connector type (XH2.54 3PIN for R1, XHB2.54 5PIN for R2) of your engraving machine's control board to ensure compatibility. Adapter cables may be required for non-LASER TREE machines.
• Materiaalin testaus: Before starting a large project, perform small test engravings on scrap material to fine-tune your speed and power settings for optimal results.
• Ohjelmistoasetukset: Familiarize yourself with your engraving software's settings for infrared lasers, as they may differ from those used for diode lasers.

10. Takuu ja tuki

Tämän tuotteen mukana tulee a 1 vuoden takuu from our store, covering manufacturing defects and malfunctions under normal use. For technical support, troubleshooting assistance, or warranty claims, please contact the seller directly. All inquiries will typically be answered within 24 hours.