Tuote loppuview
The LIGE 2024 Smart Watch is a versatile fitness and health companion designed for both men and women. It features a full touch screen, waterproof design, and Bluetooth call functionality, compatible with Android and iOS devices. This manual provides detailed instructions to help you get the most out of your new smartwatch.
Tuote loppuview videoesitysasing features like mass dial, health monitoring, sports modes, IP67 waterproofing, call rejection, and sleep monitoring.
Tärkeimmät ominaisuudet:
- 1.28-inch HD color screen with 240*240 resolution
- Koko näytön kosketustoiminto
- Bluetooth BLE5.0 connectivity
- IP67 vedenpitävä luokitus
- Yhteensopiva Android 5.0+ ja iOS 9.0+ kanssa
- Bluetooth call functionality (dial, answer, reject calls)
- Continuous heart rate, blood oxygen saturation, and blood pressure monitoring
- Multiple sports modes (123 options)
- Sleep monitoring and activity tracking (steps, calories, distance)
- Message and call reminders, remote camera control, music control
- Customizable watch faces and wallpapers
- Sedentary and drink water reminders

LIGE Smart Watch with various feature icons: Running mode, Cycling mode, Mountaineering mode, Caller information prompt, IPX67 waterproof, Health monitoring, WeChat information prompt, Sleep monitoring, Shake a shot, Blood oxygen monitoring, Bracelet lookup, Motion track, Heart rate monitoring, Durable life, Intelligent processor, Exercise mode.
Asennusopas
1. Sovelluksen lataaminen
To get started, you need to download and install the companion app, "Da Fit", on your smartphone. Scan the QR code below or search for "Da Fit" in your app store.

Skannaa tämä QR-koodi ladataksesi Da Fit -sovelluksen.
2. Lataus ja aktivointi
Before using your smartwatch for the first time, it must be charged and activated. Plug the magnetic charging cable into the metallic contact points on the back of the watch. Connect the other end of the charging cable to a USB adapter or a USB port on your computer. Charge the device for at least 10 minutes to ensure normal boot and optimal operation.

The smartwatch displaying a charging icon, highlighting its long battery life (220mAh, 7-day daily life, 30-day standby).
3. Älykellon pariliitos
- Open the Da Fit App on your smartphone and set up your personal profile.
- Go to the "Device" page within the app.
- Click "Add a Device" or "Bind Device".
- The MAC address of your watch can be found in the watch's "Settings" -> "About" page. Use this to identify your device on the scanning list.
- Select your device from the scanning list to complete pairing.
Once successfully paired, the watch will automatically connect to your phone each time you open the app. You can synchronize data by pulling down on the data page within the app.
Käyttöohjeet
Kosketusnäytön käyttäminen
- Pyyhkäise ylös: Siirry ohjauskeskukseen.
- Pyyhkäise alas: View Viestit.
- Pyyhkäise vasemmalle: Navigate through the Function List/Menu.
- Pyyhkäise oikealle: Access the Activity Center.
- Nopea View: Turn your wrist towards you to check the time or messages without tapping.
Puhelinkutsutoiminto
After connecting the smartwatch to your phone, you can use the watch to dial, make, answer, and reject calls. You can also view your call history directly on the watch. Ensure a stable Bluetooth connection between your watch and phone for optimal performance.

Woman wearing the smartwatch, demonstrating call answering and message notifications on the watch face.
Terveyden seuranta
- Syketesti: The watch continuously records your heart rate. Tap on the heart rate page to initiate a measurement. Detailed analysis is available in the app.
- Verenpainetesti: Tap on the blood pressure page to measure your current blood pressure. The watch displays recent measurements, with more detailed data in the app.
- SpO2 Test (Blood Oxygen): Tap on the SpO2 page to measure your current blood oxygen level. Recent measurements are shown on the watch, with comprehensive data in the app.
- Unenvalvonta: Wear the smartwatch during sleep to track total sleep duration, deep sleep, and light sleep. Sleep statistics reset at 8:00 PM. Detailed reports are available in the app.

The back of the smartwatch with heart rate sensor, and a graphic representation of heart rate, blood pressure, and blood oxygen monitoring.

Woman sleeping, with the smartwatch displaying sleep monitoring data (Awake Sleep, Light Sleep, Deep Sleep).
Aktiivisuuden seuranta ja urheilutilat
- Urheilu: The smartwatch automatically tracks steps taken, calories burned, and distance covered. Your movement stats reset to zero at midnight.
- Koulutus: Tap the training icon to start a new workout recording. Choose from 123 sport modes, including walking, running, cycling, basketball, football, badminton, rope skipping, and swimming.

Smartwatch displaying various sport modes including walking, running, cycling, basketball, swimming, and climbing.
Notifications & Reminders
- Muistutus viesteistä: The device can sync incoming notifications from apps like Twitter, Facebook, WhatsApp, and Instagram. The watch stores the 5 most recent messages. You can enable/disable notifications in the app settings.
- Saapuvan puhelun hylkäys: After pairing with the app, you can directly refuse incoming calls from the watch.
- Muistuta liikkumaan: The watch will vibrate to remind you to take a break after 1 hour of sitting. This feature can be toggled on/off in the app.
- Muistuta juomaan: The smartwatch will remind you to drink water at planned intervals. This feature can be configured in the app.

Smartwatch displaying message notifications from various apps like Facebook, Instagram, Twitter, WeChat, QQ, and SMS.
Muita älykkäitä ominaisuuksia
- Sää: Displays current and tomorrow's weather information. Weather data is synced with the app and will not update if disconnected for a long period.
- Musiikin hallinta: Remotely control your phone's music player.
- Kaukosuljin: Use your watch as a remote control for your phone's camera. Open the camera on your phone, then tap the camera control page on the watch to trigger the shutter.
- Mass Dial: Choose from an abundant market of watch faces to customize your display.
- Lisäominaisuudet: Stopwatch, alarm, timer, brightness adjustment, mute on/off, theater mode, factory reset, and power off options.

The smartwatch displaying various watch faces available for customization.
Huolto
Käyttö märissä olosuhteissa
Your device is IP67 water-resistant, meaning it is rain-proof and splash-proof, and can withstand sweaty workouts. However, it is not recommended for swimming or showering. Always dry your smartwatch thoroughly after it gets wet to prevent damage and ensure skin comfort.

Smartwatch submerged in water, highlighting its IP67 waterproof design.
Puhdistus ja hoito
- Puhdista kello säännöllisesti pehmeällä, kuivalla liinalla.
- Vältä kovien kemikaalien tai hankaavien materiaalien käyttöä.
- Pidä latauskoskettimet puhtaina ja kuivina.
Vianetsintä
Usein kysytyt kysymykset
- Q: Why is there a discrepancy between the blood pressure values on the watch and a medical blood pressure monitor?
A: The deviation in measured values is due to different measurement sites. Medical blood pressure monitors measure at the brachial artery, while the watch measures at the micro-artery branches. These can naturally differ by thirty to forty units. Simultaneous measurement can also affect readings due to blood flow compression. The watch's data is for reference only and cannot be used as medical data. - Q: Why shouldn't I wear the watch while bathing with hot water?
A: High water temperature generates a lot of steam. Steam molecules are small and can easily penetrate the watch casing. When the temperature drops, the steam condenses into liquid water droplets, which can cause short circuits in the internal components, damaging the circuit board and potentially leading to permanent damage. - Q: Why does the watch not receive message notifications?
A: For Android phones: 1. Ensure message notification switch is enabled in the Da Fit app. 2. Confirm messages display normally in your phone's notification bar (the watch reads notifications from here). 3. Open accessibility settings for the Da Fit app in your phone's settings. For Apple phones: 1. Confirm message notification switch is enabled in the Da Fit app. 2. Confirm messages display normally in your phone's notification bar. Ensure notification switches for WeChat, QQ, phone calls, messages, and the Da Fit app are enabled in your phone's settings. - Q: What application is used when connecting to a smart phone?
A: The app is "Da Fit". You can scan the QR code on the package or manual to download it. - Q: Why does the pedometer not count steps when I have already started walking?
A: To reduce errors, the smartwatch usually sets an initial value of 10. It will start counting steps when you walk more than 10 steps. The app will show the real walking steps and start counting from step 10. - Q: Why the device cannot boot or start up properly?
A: Lataa uutta laitettasi vähintään 10 minuuttia tai kauemmin ennen ensimmäistä käyttökertaa. Tämä varmistaa laitteen normaalin käynnistymisen ja optimaalisen toiminnan. - Q: Can not find device when pairing device?
A: Please make sure the distance between your phone and the device is less than 0.5m. Also, ensure the device is not under low battery. If the problem persists after 1.5 hours of charging, please contact support. - Q: Can not connect the device with app?
A: Some smartphone Bluetooth services may become abnormal when rebooted. Please reboot your smartphone for pairing. - K: Miksi Android-mobiililaite katkaisee yhteyden?
A: Android mobile phone system memory management may force background apps to close. You need to turn off power-saving mode or add the app to the system's green background list to prevent it from being forced closed. The app must be running in the background for Bluetooth to remain connected. - K: Miksi en voinut yhdistää Bluetoothia?
A: 1. Please download the Da Fit app first. 2. Etsi the Bluetooth name on your app and then connect it. 3. You should see a request to connect on the phone; click “pair.” If you had connected Bluetooth before, please clear all your phone's Bluetooth devices and try again.
Tekniset tiedot

Image showing the smartwatch dimensions and key specifications in a table format.
| Ominaisuus | Erittely |
|---|---|
| Malli | 0223 |
| Näytön koko | 1.28 tuuman HD-värinäyttö |
| Resoluutio | 240*240 pikseliä |
| Kosketusnäyttö | Täysi kosketus |
| Bluetooth-versio | BLE 5.0 |
| Vesitiivis luokitus | IP67 Life vedenpitävä |
| Akun kapasiteetti | 220–300 mAh (yleensä 220 mAh) |
| Akun kesto | 5–7 päivää (päivittäisessä käytössä), 30 päivää (valmiustilassa) |
| Järjestelmän yhteensopivuus | Android 5.0 tai uudempi, iOS 9.0 tai uudempi |
| Bandin materiaali | Silikageeli |
| Liikkeen tyyppi | Elektroninen |
| Muisti (RAM/ROM) | 128 MB RAM / 128 MB ROM (Note: OCR shows 64MB memory, using JSON data for consistency) |
| CPU | DA14683 (from OCR) |
| Kiihtyvyysanturi | SC7A20 (from OCR) |
| Hakemuksen ikäryhmä | Aikuinen |
| Sertifiointi | CE |
Ympäristöolosuhteet
- Käyttölämpötila: 14 ℉ - 122 ℉ (-10 ℃ - 50 ℃)
- Ei käytössä oleva lämpötila: -4 ℉ - 140 ℉ (-20 ℃ - 60 ℃)
Koko
- Sopii ranteeseen, jonka ympärysmitta on 5.5 - 7.7 tuumaa.
Käyttäjän vinkit
- Alkuperäinen lataus: Always fully charge your smartwatch before its first use to ensure proper activation and optimal battery performance.
- App in Background: For Android users, ensure the Da Fit app is running in the background and is excluded from battery optimization settings to maintain a stable Bluetooth connection and receive all notifications.
- Askelmittarin tarkkuus: Don't be alarmed if the step counter doesn't immediately register steps; it typically starts counting after 10 consecutive steps to filter out incidental movements.
- Bluetooth-yhteys: If you experience connection issues, try clearing previously paired Bluetooth devices from your phone's settings before attempting to pair again.
- Terveystietojen vastuuvapauslauseke: Remember that the health monitoring features (heart rate, blood pressure, SpO2) are for reference only and should not be used for medical diagnosis or treatment. Consult a healthcare professional for any health concerns.
Takuu ja tuki
FCC-yhteensopivuus
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
Important Health Data Disclaimer
Although the bracelet can monitor your heart rate, blood pressure, and blood oxygen, it cannot be used for any medical purpose. It is only designed to help people live a healthier life. All measurement results are for reference only. They are based on scientific algorithms and sensors. Please do not compare them to medical devices. We appreciate your understanding.
Lisäresurssit
Yksityiskohtaisen käyttöoppaan PDF-muodossa löydät virallisesta dokumentista: Käyttöopas (PDF)





