SEEIRIR BT-8806 Digital Anemometer User Manual

Johdanto

This manual provides comprehensive instructions for the safe and effective use of the SEEIRIR BT-8806 Digital Anemometer. This device is engineered for real-time measurement of wind speed, temperature, and air volume, delivering reliable data with rapid response.

It is suitable for a variety of applications, including air conditioning and ventilation system detection, outdoor sports wind speed monitoring, industrial safety inspections, and meteorological teaching experiments.

Turvallisuustiedot

• Lue tämä käyttöohje huolellisesti ennen laitteen käyttöä.
• Do not attempt to disassemble or modify the anemometer. This may cause damage and void the warranty.
• Keep the device away from water and high humidity to prevent electrical shock or damage.
• Käytä vain määritettyä paristotyyppiä ja varmista oikea napaisuus asennuksen aikana.
• Vältä altistamasta laitetta äärimmäisille lämpötiloille tai suoralle auringonvalolle pitkiä aikoja.
• Pidä poissa lasten ulottuvilta.

Pakkauksen sisältö

Varmista, että pakkauksessasi on kaikki alla luetellut tuotteet:

• BT-8806 Digital Anemometer
• Mini Compass
• Nauha
• Ruuvimeisseli
• Käyttöopas

Tuote loppuview

Familiarize yourself with the components of your BT-8806 Digital Anemometer:

• Wind Cup Sensor: Located at the top, this rotating sensor measures wind speed.
• LCD-näyttö: Shows real-time readings for wind speed, temperature, and other indicators.
• UNIT-painike: Changes wind speed measurement units.
• MAX/MIN-painike: Cycles through maximum, minimum, and average wind speed readings.
• Power / Backlight Button: Turns the device on/off and activates/deactivates the display backlight.
• ° F/° C -painike: Vaihtaa Celsius- ja Fahrenheit-lämpötilayksiköiden välillä.
• HOLD-painike: Freezes the current readings on the display.
• Akkulokero: Sijaitsee takana akun asennusta varten.
• Tripod Screw Mount: Sijaitsee pohjassa jalustaan ​​kiinnittämistä varten.

Asennus

Akun asennus

The BT-8806 Anemometer requires batteries for operation. To install:

1. Paikanna laitteen takaosassa oleva paristolokeron kansi.
2. Use the included screwdriver to open the battery compartment.
3. Insert the required batteries (not included) according to the polarity markings (+/-) inside the compartment.
4. Sulje paristolokeron kansi kunnolla.

Lanyardin kiinnitys

Attach the included lanyard to the designated loop on the anemometer for secure handling and to prevent accidental drops.

Jalustan kiinnitys

For stable, hands-free operation, the device features a standard tripod screw mount at its base. Attach it to a compatible tripod as needed.

Toiminta

Virta päälle/pois

Paina ja pidä painettuna Tehoa button (red circle with line) for approximately 2 seconds to turn the device on or off.

Taustavalon ohjaus

Paina lyhyesti Tehoa button to activate or deactivate the display backlight for improved visibility in low-light conditions.

Tuulen nopeuden mittaus

Hold the anemometer so that the wind cup sensor at the top faces the airflow. The current wind speed will be displayed prominently on the LCD.

Changing Wind Speed Units

Paina UNIT button to cycle through the available wind speed units: meters per second (m/s), kilometers per hour (km/h), miles per hour (mph), and Knots.

Lämpötilan mittaus

The current ambient temperature is displayed at the bottom section of the LCD simultaneously with wind speed readings.

Lämpötilayksiköiden vaihtaminen

Paina °F/°C -painiketta vaihtaaksesi lämpötilanäytön Celsius- (°C) ja Fahrenheit- (°F) välillä.

MAX/MIN/AVG-toiminto

Paina MAX/MIN -painiketta view the maximum, minimum, and average wind speed readings recorded since the device was powered on or the function was reset. Press the button repeatedly to cycle through these modes.

Data Hold -toiminto

Paina PIDÄ button to freeze the current readings on the display. This is useful for noting down measurements. Press the button again to release the hold and resume real-time measurements.

Huolto

Puhdistus

Wipe the device exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.

Varastointi

When not in use for extended periods, store the anemometer in a cool, dry place. Remove the batteries to prevent leakage and damage to the device.

Vianetsintä

• Laite ei käynnisty: Check battery installation. Ensure batteries are inserted with correct polarity and are not depleted. Replace batteries if necessary.
• Inaccurate wind speed readings: Ensure the wind cup sensor is unobstructed and rotating freely. Avoid measuring in turbulent or obstructed airflow.
• Display is blank or shows erratic readings: Check battery level. If the issue persists after replacing batteries, contact customer support.
• Taustavalo ei toimi: Ensure the device is powered on. Briefly press the Power button to toggle the backlight.

Tekniset tiedot

• Malli: BT-8806
• Mittayksiköt: m/s, km/h, mph, Knots (for wind speed); °C, °F (for temperature)
• Tärkeimmät ominaisuudet: Real-time wind speed and temperature measurement, MAX/MIN/AVG functions, Data Hold, Backlight, Tripod Screw Mount
• Virtalähde: Paristot (ei sisälly)
• Tuotteen paino: 14.1 unssia
• Valmistaja: SEEIRIR

Takuu ja tuki

For detailed warranty information, technical assistance, or customer support, please refer to the contact details provided with your original purchase documentation or visit the official SEEIRIR websivusto.