Diymore U-18 USB-C Tester User Manual

1. Johdanto

The Diymore U-18 USB-C Tester is a versatile 2-in-1 device designed for monitoring USB-C power delivery, voltage, current, and other charging parameters. It features a 1.77-inch TFT color LCD screen for clear data display and supports various fast charging protocols, including PD and QC2.0/3.0. This manual provides comprehensive instructions for its safe and effective use.

2. Tuote ohiview

2.1 Tärkeimmät ominaisuudet

• Teräväpiirtonäyttö: 1.77-inch TFT screen shows real-time voltage, current, power, and charging data.
• Monen protokollan tuki: Compatible with PD and QC2.0/3.0 charging protocols.
• Kattavat mittaukset: Monitorit voltage (4-25V), current (up to 6.5A), power output, and charging protocols with ±0.1V/0.01A accuracy.
• Mukautettava käyttöliittymä: Features 7 different display interfaces for various charging parameters and statistics.
• Kehittynyt diagnostiikka: Measures wire internal resistance using the pressure difference method to evaluate charging efficiency and cable quality.

2.2 Komponentit ja käyttöliittymä

Kuva 1: Diagram illustrating the various ports and control buttons on the Diymore U-18 USB-C Tester. This includes the Type-C Input, Type-C Output, USB-A Input, USB-A Output, USB-HID, Micro USB Input, and the control keys (ENTER, KEY-, KEY+, PD Communication Switch, BACK Key).

The U-18 tester features multiple input/output ports and control buttons:

• C-tyypin tulo: Connects to the power source (e.g., charger).
• Type-C lähtö: Connects to the device being charged/tested.
• USB-A Input (4V-24V): Connects to a USB-A power source.
• USB-A Output (0-6.5A): Connects to a USB-A device being charged/tested.
• USB-HID: For data communication with a computer (if supported by firmware).
• Micro USB-tulo: For external power supply or firmware updates.
• 1.77-inch TFT Color LCD Screen: Näyttää kaikki mittaustiedot.
• (1) ENTER Key: Vahvistaa valinnat tai siirtyy valikoihin.
• (2) KEY - Key: Navigates down or decreases values.
• (3) KEY + Key: Navigates up or increases values. (Long press to toggle display orientation)
• (4) PD Communication Switch: Activates/deactivates PD communication.
• (5) BACK Key: Palaa edelliseen näyttöön tai valikkoon.

3. Asennus ja peruskäyttö

3.1 Testerin kytkeminen

1. Identify the appropriate input port (USB-A or Type-C) on the tester based on your power source.
2. Connect the power source (e.g., wall charger, power bank) to the tester's input port.
3. Connect the device you wish to test (e.g., smartphone, tablet) to the tester's corresponding output port (USB-A or Type-C).
4. The tester's screen should illuminate and begin displaying real-time data.

3.2 Reading Basic Measurements

Kuva 2: Example of the tester's display showing various measurement data, including voltage, current, power, energy statistics, capacity statistics, and fast charging protocol information.

Upon connection, the main display will show key parameters:

• Voitage (V): Sähköpotentiaaliero.
• Nykyinen (A): Sähkövarauksen virtausnopeus.
• Teho (W): Sähköenergian siirtymisnopeus.
• Kapasiteetti (Ah): Accumulated charge over time.
• Energia (Wh): Accumulated energy over time.
• D+/D- Voitage: Data line voltages, useful for protocol detection.
• protokolla: Indicates detected fast charging protocols (e.g., QC2.0, QC3.0, PD).

4. Lisätoiminnot

4.1 Interface Navigation and Settings

Kuva 3: Various display interfaces and settings menus available on the Diymore U-18 USB-C Tester, including system settings, simple interface mode, cable measurement, and protocol detection/trigger options.

Käytä ENTER, KEY -, KEY +, ja TAKAISIN keys to navigate through different display interfaces and settings menus. A long press on the KEY + button can rotate the display orientation.

• Järjestelmäasetukset: Adjust display brightness, standby time, language, and perform a factory reset.
• Simple Interface Mode: Provides a streamlined view of essential data.
• Ripple/Voltage/Current Curve Interface: Displays real-time graphs of voltage ja virranvaihtelut.

4.2 Cable Internal Resistance Measurement

Kuva 4: The tester performing a wire internal resistance measurement, displaying reference voltage/current, real voltage/current, difference, and calculated cable resistance.

To measure cable internal resistance:

1. Navigate to the 'Cable Measurement' interface using the navigation keys.
2. Connect the power source directly to the tester's input, and then connect the cable to be tested to the tester's output.
3. The tester will employ the voltage drop method to measure the resistance, automatically calculating and displaying the cable resistance value. A lower resistance indicates a more efficient cable.

4.3 Fast Charging Protocol Detection and Trigger

The tester can automatically detect and trigger various fast charging protocols. Navigate to the 'Protocol Detection/Trigger' interface to:

• Automaattinen tunnistus: The tester will attempt to identify the fast charging protocol supported by the connected power source.
• Manual Trigger: You can manually select and trigger specific protocols like PD, QC2.0, or QC3.0 to test compatibility and performance.

5. Tekniset tiedot

Kuva 5: Detailed product specifications for the Diymore U-18 USB-C Tester, including measurement ranges, resolution, and accuracy for various parameters.

Mitat: 3.94 x 2.56 x 0.59 tuumaa (L x L x K)

Virtalähde: USB-C

Käyttölämpötila-alue: 32°F - 140°F (0°C - 60°C)

6. Vianmääritys

6.1 Display Not Lighting Up with Type-C PD

Kuva 6: Visual guide for troubleshooting when the tester screen does not light up with a Type-C PD connection, showing solutions like flipping the connector or using the built-in Type-C interface.

If the tester screen does not light up when connected to a Type-C PD power source:

1. Flip the Type-C connector: Type-C connectors are reversible. Try unplugging and re-inserting the connector with the opposite orientation.
2. Use the built-in Type-C interface: Ensure you are using the dedicated Type-C input/output ports on the tester for PD connections.

Huomautus: When the PD power supply is not connected to a fast charging device, it may not be powered by default.

6.2 Epätarkat lukemat

• Varmista, että kaikki liitännät ovat turvallisia ja että niissä ei ole roskia.
• Test with a different cable or power source to rule out external factors.
• Perform a factory reset via the system settings menu if persistent issues occur.

7. Turvallisuustiedot

• Älä altista laitetta äärimmäisille lämpötiloille, kosteudelle tai suoralle auringonvalolle.
• Vältä laitteen pudottamista tai altistamista voimakkaille iskuille.
• Älä yritä purkaa tai muokata laitetta, sillä se mitätöi takuun ja voi aiheuttaa vahinkoja tai loukkaantumisen.
• Pidä poissa lasten ulottuvilta.

8. Takuu ja tuki

Diymore products are designed for quality and reliability. This product comes with an 18 kuukauden takuu from the date of purchase. We also offer a 30 päivän palautusoikeus for any reason. For technical assistance or warranty claims, please contact Diymore customer support. Our team is available for 24 tunnin asiakastuki vastata mahdollisiin kysymyksiisi tai huolenaiheisiisi.

Lisätietoja saat osoitteesta Diymore Store on Amazon.