TOOLTOP Awithz UK1 9000W Portable Spot Welder

1. Johdanto

Thank you for choosing the TOOLTOP Awithz UK1 9000W Portable Spot Welder. This high-power, portable device is designed for precise spot welding applications, particularly suitable for DIY 18650 battery packs and other small-scale welding projects. This manual provides essential information for safe operation, setup, usage, and maintenance of your spot welder.

Figure 1: Awithz UK1 9000W Portable Spot Welder

1.1 Turvallisuustiedot

Please read and understand all safety warnings and instructions before operating this device. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage. Keep this manual for future reference.

• Silmien suojaus: Always wear appropriate eye protection (welding goggles or shield) to protect against sparks and intense light.
• Ilmanvaihto: Operate in a well-ventilated area to avoid inhaling welding fumes.
• Sähköturvallisuus: Do not operate the welder with wet hands or in damp conditions. Ensure all connections are secure.
• Syttyvät materiaalit: Keep flammable materials away from the welding area. Sparks can ignite nearby substances.
• Akun turvallisuus: When welding batteries, ensure they are not overcharged or damaged. Improper handling of batteries can lead to explosion or fire.
• Lapset ja lemmikit: Pidä laite poissa lasten ja lemmikkien ulottuvilta.
• Huolto: Katkaise virta ennen minkään huollon tai puhdistuksen suorittamista.

2. Pakkauksen sisältö

Varmista, että pakkauksessasi on kaikki alla luetellut tuotteet. Jos jokin tuote puuttuu tai on vaurioitunut, ota yhteyttä jälleenmyyjään.

• Awithz UK1 Spot Welder Unit
• WP110 Welding Pens (2 units)
• Foot Pedal Board (1 unit)
• Nickel Coil (1 unit)
• Latauskaapeli (Type-C, 1 kpl)
• Spare Soldering Pins (1 pair)
• Sandpaper (1 unit)

Kuva 2: Mukana tulevat lisävarusteet

3. Asennus

Follow these steps to prepare your spot welder for operation.

3.1 Laitteen lataaminen

Before first use, fully charge the spot welder. Connect the provided Type-C charging cable to the charging port on the device and to a suitable USB power adapter (not included). The display will indicate charging status.

3.2 Hitsauskynien kytkeminen

Insert the two welding pens into the designated ports on the front of the spot welder. Ensure they are securely connected. The design allows for flexible positioning of the pens, either from the front or side, to suit your working style.

Figure 3: Welding Pen Connection Flexibility

Huomautus: Using the front opening for the welding pens allows for greater flexibility and an effective usage length of approximately 40cm without winding. Side opening may require bending the wire and offers a shorter effective length.

3.3 Connecting the Foot Pedal (Optional)

If you prefer foot-pedal operation, connect the foot pedal board to its dedicated port on the spot welder. This allows for hands-free triggering of the weld.

4. Käyttöohjeet

This section details how to operate your Awithz UK1 spot welder.

4.1 Virran kytkeminen päälle/pois

Press and hold the power button to turn the device on or off. The digital display will illuminate upon power-on.

4.2 Näytön ja säätimien ymmärtäminen

The Awithz UK1 features a digital display and a control knob for adjusting settings.

Kuva 4: Ohjauspaneeli ja näyttö

• Tila: Selects between Automatic (A) and Manual (M) welding modes.
• Vaihteet: Adjusts the welding power level from 1 to 100. Higher numbers indicate more power.
• Laukaista: Sets the trigger time (pulse duration) from 1 to 20ms.
• Jatkuvat hitsaukset: Configures continuous welds (1 or 2 times).
• Nuppi: Käytetään asetusten selaamiseen ja arvojen säätämiseen.

4.3 Selecting Welding Modes

The device supports three welding modes:

• Manuaalinen tila: The weld is triggered by pressing a button on the welding pen or the foot pedal.
• Automaattinen tila: The weld is triggered automatically when both welding pen tips make contact with the workpiece.
• Foot Pedal Mode: The weld is triggered by pressing the connected foot pedal.

Use the control knob to select your desired mode on the display.

4.4 Hitsausparametrien säätäminen

Rotate the control knob to navigate between 'Mode', 'Gear', 'Trigger', and 'Cont Welds'. Press the knob to select a parameter, then rotate to adjust its value. Press again to confirm the setting.

• Gear (Power): Start with a lower gear setting (e.g., 20-30) and gradually increase until a strong weld is achieved. The optimal setting depends on the material thickness and type.
• Trigger (Pulse Duration): Adjusts how long the welding current flows. Shorter durations for thinner materials, longer for thicker.
• Cont Welds (Pulse Count): For stronger welds, you can set the machine to deliver 2 pulses per trigger.

4.5 Hitsausprosessi

Ensure the workpiece (e.g., nickel strip and battery terminal) is clean and free of oxidation. Use the included sandpaper if necessary.

1. Aseta nikkeliliuska tiiviisti akun napaa vasten.
2. Position the two welding pen tips onto the nickel strip, ensuring they are parallel and make good contact with the material. Apply slight pressure.
3. Trigger the weld according to your selected mode (manual button, foot pedal, or automatic contact).
4. Observe the weld. A good weld will be strong and clean. Adjust settings (Gear, Trigger, Cont Welds) as needed for optimal results.

Figure 5: Welding Capability and Dual Pulse Energy

The Awithz UK1 utilizes a 9000W high-power dual pulse energy system for strong and reliable welds. It can weld various materials up to specific thicknesses:

• Kuparilevy: 0.1 mm (MAX)
• Teräslevy: 0.25 mm (MAX)
• Rautalevy: 0.25 mm (MAX)
• Nikkelöity levy: 0.3 mm (MAX)
• Puhdas nikkelilevy: 0.15 mm (MAX)

5. Huolto

Proper maintenance ensures the longevity and performance of your spot welder.

• Puhdistus: Regularly clean the welding pen tips and the main unit with a dry, soft cloth. Ensure no metal dust or debris accumulates around the welding area.
• Replacing Welding Pins: If the welding pins become worn or damaged, replace them with the provided spare pins or genuine replacements. Ensure the new pins are securely installed.
• Varastointi: Store the spot welder in a cool, dry place away from direct sunlight and moisture. Disconnect all cables before storage.
• Akun hoito: For optimal battery life, avoid fully discharging the unit frequently. Charge it regularly, even during periods of non-use.

6. Vianmääritys

If you encounter issues with your spot welder, refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact TOOLTOP customer support.

7. Tekniset tiedot

Key technical specifications for the Awithz UK1 Spot Welder:

• Mallinumero: TT-Awithz-UK1-9000mAh
• Merkki: TOOLTOP
• Teholähtö: 9000 W (huippu)
• Hitsausvirta: Up to 1330A (Adjustable)
• Weldable Material Thickness (MAX):
  • Copper sheet: 0.1mm
  • Steel sheet: 0.25mm
  • Iron sheet: 0.25mm
  • Nickel plated sheet: 0.3mm
  • Pure nickel sheet: 0.15mm
• Latausportti: Tyyppi-C
• Hitsaustavat: Manual, Automatic, Foot Pedal
• Sertifikaatit: CE, RoHS

Figure 6: Dual A-Cell Power System

The Awithz UK1 features a Dual A-Cell power system, contributing to a 200% range improvement, 30% faster charging, and 15% cooler operation compared to standard designs.

8. Takuu ja tuki

The TOOLTOP Awithz UK1 Spot Welder comes with a manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. EU spare part availability duration is 1 year from the date of purchase.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or visit the official TOOLTOP websivustolta asiakaspalvelun yhteystiedot.