BTMETER BT-5000G Cup Anemometer Instruction Manual

1. Johdanto

The BTMETER BT-5000G is a handheld cup anemometer designed for accurate measurement of wind speed, air flow volume (CFM), and wind temperature. Its 360° rotatable wind cup allows for measurements from any direction, making it suitable for various applications including HVAC system balancing, drone flying, sailing, and general weather monitoring.

This manual provides detailed instructions for the proper setup, operation, and maintenance of your BT-5000G anemometer to ensure optimal performance and longevity.

2. Tärkeimmät ominaisuudet

• 360° Rotatable Wind Cup: Measures wind speed from any direction (0.3~30 m/s) with ±5% accuracy.
• Air Flow Volume Measurement: Tests air flow volume from 0 to 999900 CFM (cubic feet per minute).
• Lämpötilan mittaus: Measures wind temperature from 14°F~113°F (-10°C~45°C) with ±3.6°F (±2°C) accuracy. Switchable between Fahrenheit and Celsius.
• Useita mittaustiloja: Supports Max/Min measurement for wind speed and air flow volume.
• Yksikön monipuolisuus: Five wind speed units (m/s, ft/min, Knots, Km/h, mph) and three air flow volume units (CFM, CMM, CMS).
• Taustavalaistu LCD -näyttö: Ensures easy reading in low light conditions.
• USB-ladattava: Convenient power source.
• Tietojen säilytystoiminto: Freezes current measurement data.
• Virransäästön ilmaisin: Hälyttää, kun akun varaus on vähissä.
• Integroitu kompassi: Provides directional guidance for outdoor activities.
• Kestävä muotoilu: Dustproof and waterproof touch screen.

3. Pakkauksen sisältö

Pura pakkausta pakkauksesta ja varmista, että kaikki alla luetellut osat ovat mukana ja hyvässä kunnossa:

• 1 x BTMETER BT-5000G Cup Anemometer
• 1 x Käyttöohje
• 1 x USB-latauskaapeli

4. Tuote ohiview

Familiarize yourself with the components of the BT-5000G anemometer:

Kuva 1: Etuosa view of the BT-5000G Anemometer with key features highlighted, including the compass, wind cups, LCD screen, and various function buttons.

• Wind Cup Assembly: Rotates to measure wind speed and direction.
• LCD-näyttö: Shows wind speed, air flow, temperature, and other indicators.
• Ohjauspainikkeet:
  • Virtapainike: Kytkee laitteen päälle/pois.
  • MODE-painike: Switches between measurement modes (e.g., current, Max, Min).
  • UNIT-painike: Changes units for wind speed, air flow, and temperature.
  • MAX/MIN-painike: Activates maximum and minimum value display.
  • SET -painike: Used for setting parameters or confirming selections.
  • Taustavalopainike: Kytkee näytön taustavalon päälle/pois.
• Kompassi: Integrated for directional reference.
• Type-C latausportti: Sivussa oleva liitäntä sisäisen akun lataamista varten.
• 1/4" Metal Screw Hole: Located at the bottom for tripod mounting.

Kuva 2: Sivu view of the BT-5000G Anemometer illustrating its dimensions, the 1/4" metal screw hole for tripod mounting, and the Type-C charging port.

5. Asennus

5.1 Ensimmäinen lataus

Before first use, ensure the BT-5000G is fully charged. Connect the provided USB Type-C cable to the charging port on the side of the device and to a standard USB power adapter (not included). The low power indicator on the display will show charging status.

5.2 Virta päälle/pois

• Käynnistä painamalla -painiketta pitkään Virtapainike (usually marked with a circle and a vertical line) until the LCD display illuminates.
• Katkaise virta pitämällä -painiketta painettuna Virtapainike uudelleen, kunnes näyttö sammuu.

5.3 Kolmijalan kiinnitys (valinnainen)

For continuous or stationary measurements, the BT-5000G can be mounted on a standard tripod using the 1/4" metal screw hole at its base. Ensure the tripod is stable before mounting the device.

6. Käyttö

6.1 Perusmittaus

Once powered on, the device will display current wind speed and temperature. The 360° rotatable wind cup allows for accurate readings regardless of the device's orientation relative to the wind source.

Figure 3: The BT-5000G Anemometer in an outdoor setting, demonstrating its 360° rotating wind cup for omnidirectional wind measurement and the clear backlit LCD display.

6.2 Yksiköiden vaihtaminen

Paina UNIT-painike to cycle through available units for wind speed, air flow, and temperature.

• Tuulen nopeuden yksiköt: m/s, ft/min, Knots, Km/h, mph
• Air Flow Volume Units: CFM, CMM, CMS
• Lämpötilayksiköt: °C, °F

6.3 Max/Min Measurement Modes

Vastaanottaja view the maximum or minimum recorded values during a measurement session:

1. Paina MAX/MIN-painike once to display the maximum wind speed or air flow value.
2. Press it again to display the minimum wind speed or air flow value.
3. Press it a third time to return to current measurement mode.

Figure 4: The BT-5000G Anemometer's display showing the Max/Min measurement modes, allowing users to analyze peak and lowest wind conditions.

6.4 Tietojen säilytys

Voit jäädyttää nykyisen lukeman näytölle painamalla HOLD-painike (if available, or typically a short press of the Power button or a dedicated button). Press it again to release the hold and resume live measurements.

6.5 taustavalon ohjaus

Paina Taustavalopainike (often indicated by a light bulb icon) to turn the LCD backlight on or off for improved visibility in various lighting conditions.

6.6 Air Flow Volume (CFM/CMM/CMS) Measurement

To measure air flow volume, you may need to input the area of the duct or vent. Refer to the device's on-screen prompts or the SET-painike for area input. The device will then calculate and display the air flow volume based on the measured wind speed and the entered area.

Figure 5: The BT-5000G Anemometer's display showing both wind speed and calculated wind flow (CFM) measurements, along with their respective ranges and units.

6.7 Sovellukset

The BT-5000G is versatile for both industrial and daily applications:

• Teollisuus: HVAC systems, dust collectors, ventilation systems.
• Päivittäin: Drone driving, parachuting, sailing, golf, hiking, hunting, shooting, gliding.

Kuva 6: Visuaalinen esimerkkiamples of the BTMETER BT-5000G Anemometer's diverse applications in both industrial settings (HVAC, dust collectors, ventilation) and daily activities (drone flying, parachuting, sailing).

7. Huolto

• Puhdistus: Pyyhi laite pehmeällä, kuivalla liinalla. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• Varastointi: Store the anemometer in a cool, dry place away from direct sunlight and extreme temperatures.
• Akun hoito: Lataa laite säännöllisesti, vaikka sitä ei käytettäisikään usein, akun kunnon ylläpitämiseksi. Vältä akun tyhjentymistä kokonaan pitkiksi ajoiksi.
• Wind Cup Inspection: Periodically check the wind cup assembly for any obstructions or damage that might affect rotation and accuracy.

8. Vianmääritys

9. Tekniset tiedot

10. Virallinen tuotevideo

11. Takuu ja tuki

The BTMETER BT-5000G Cup Anemometer comes with a 365-day quality warranty ostopäivästä lukien. Tämä takuu kattaa valmistusvirheet ja varmistaa, että tuote täyttää sille määritellyt suorituskykystandardit.

For technical support, warranty claims, or any inquiries regarding your device, please contact BTMETER customer service through the retailer where the product was purchased or visit the official BTMETER websivustolta yhteystiedot.

Säilytä ostokuittisi todisteena ostosta takuun voimassaoloa varten.