Johdanto
Thank you for choosing the Turtle Beach Afterglow Wireless RGB Gaming Controller. This controller is officially licensed for Nintendo Switch, Nintendo Switch Lite, Nintendo Switch OLED, and Nintendo Switch 2, providing an enhanced gaming experience with its advanced features and customizable lighting. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.
Video: Yliview of Turtle Beach Nintendo Switch 2 Controllers, Headsets, and Cases. This video provides a general look at the product line, including the Afterglow Wireless RGB Gaming Controller.
Tuotteen ominaisuudet
- Officially Licensed by Nintendo: Ensures full compatibility and quality for Nintendo Switch, Switch Lite, OLED, and Switch 2 consoles.
- Säädettävä RGB-valo: Features a translucent design with customizable brightness and colors, offering 4 preset lighting modes.
- TMR Thumbsticks: Engineered for smooth, accurate gameplay and enhanced durability, reducing drift.
- C Button for Gamechat: Dedicated button for seamless in-game communication.
- Langaton yhteys: Up to 30-foot low latency wireless connection for freedom of movement.
- Ladattava akku: Provides up to 40 hours of play time per charge.
- Built-In Motion Controls: Enhances control and responsiveness for immersive gaming.
- Dual Mappable Quick-Action Back Buttons: Customize functions for faster reactions.
- Textured Thumbsticks and Grips: Designed for comfort and improved control during extended gaming sessions.
Asennus
Alkulataus
Before first use, fully charge your controller. Connect the included USB-C cable to the controller's charging port and the other end to a USB power source (e.g., Nintendo Switch dock, computer, or USB wall adapter). The RGB lighting will indicate charging status and turn off or change color when fully charged.
Kuva: The Turtle Beach Afterglow Wireless RGB Gaming Controller connected to a USB-C charging cable, illustrating the charging process with green internal lighting.
Yhdistäminen Nintendo Switchin kanssa
- Varmista, että Nintendo Switch -konsolisi on päällä ja päivitetty uusimpaan järjestelmäohjelmistoon.
- Valitse HOME-valikosta Ohjaimet, sitten Muuta pitoa/järjestystä.
- On the Afterglow Wireless Controller, press and hold the SYNC-painike (located on the top edge of the controller) for a few seconds until the player indicator lights begin to flash.
- Once the controller is paired, the player indicator light(s) will remain solid, and the controller will be ready for use.
- To wake the console with the controller, ensure the console is in sleep mode and press the Home button on the controller.
Käyttöohjeet
Perusohjaimet
The controller features standard Nintendo Switch button layouts. Refer to the image below for a visual guide to the buttons and their functions.
Kuva: Ylhäältä alas view of the Turtle Beach Afterglow Wireless RGB Gaming Controller, highlighting the layout of the face buttons, thumbsticks, and D-pad.
Gamechat Function (C Button)
Omistettu C-painike allows for quick access to in-game chat features, if supported by the game. Press the C button to activate or deactivate game chat as needed.
Kuva: A finger interacting with the 'C' button on the controller, demonstrating its location and use for game chat.
Räätälöinti
RGB-valaistustilat
The Afterglow controller features customizable RGB lighting with four preset modes. To cycle through the lighting modes and adjust brightness:
- Paikanna Toimintopainike (often a small button near the Home button or on the back).
- Press the Function Button + Left Stick (L3) to cycle through different lighting colors/modes.
- Press the Function Button + Right Stick (R3) säätääksesi kirkkaustasoja.
Kuva: The controller showcasing its translucent design with vibrant orange RGB lighting, illustrating customizable illumination.
Mappable Quick-Action Back Buttons
The controller includes two mappable quick-action back buttons (P1 and P2) for assigning specific functions, allowing for faster in-game reactions. To map these buttons:
- Paina ja pidä painettuna Toimintopainike (usually located on the back or bottom of the controller) for 3 seconds. The LED indicator will begin to flash.
- Paina Takaisin-painike (P1 or P2) you wish to map. The LED will flash rapidly.
- Paina Standard Button (A, B, X, Y, L, R, ZL, ZR, D-pad, etc.) you want to assign to the back button. The LED will flash slowly.
- Paina Toimintopainike again to save the mapping. The LED will turn off.
- To clear a mapping, repeat steps 1-3, but instead of pressing a standard button, press the same back button again.
Kuva: Takaosa view of the controller, highlighting the two mappable quick-action buttons (P1 and P2) and their blue illumination.
Liikeohjaimet
The controller features built-in motion controls, allowing for intuitive and immersive gameplay in compatible titles. These controls automatically activate when a game utilizes motion sensing. Ensure your controller is properly calibrated if you experience issues with motion control responsiveness.
Kuva: The controller with yellow lighting, visually representing its built-in motion control capabilities with directional arrows.
Huolto
Puhdistus
Puhdista ohjain pehmeällä, kuivalla liinalla. Pinttyneeseen likaan, hankaa kevyesti.ampKostuta liina vedellä. Vältä voimakkaiden kemikaalien tai hankaavien materiaalien käyttöä, sillä ne voivat vahingoittaa ohjaimen pintakäsittelyä ja sisäisiä komponentteja.
Varastointi
Säilytä ohjainta viileässä, kuivassa paikassa, poissa suorasta auringonvalosta ja äärimmäisistä lämpötiloista. Jos säilytät ohjainta pitkään, varmista, että akku on osittain ladattu (noin 50 %) sen käyttöiän pidentämiseksi.
Vianetsintä
| Ongelma | Mahdollinen ratkaisu |
|---|---|
| Ohjain ei käynnisty. | Varmista, että ohjain on ladattu täyteen. Liitä se virtalähteeseen USB-C-kaapelilla. |
| Ohjain ei pariliitä Nintendo Switchin kanssa. | Verify the console is updated. Repeat the pairing steps: Go to 'Controllers' > 'Change Grip/Order' on the Switch, then press and hold the SYNC button on the controller. Ensure no other wireless interference is present. |
| RGB lighting is stuck on one color or not changing. | Try resetting the controller (if a reset button is available, otherwise power cycle). Ensure you are using the correct button combination (Function Button + Left Stick) to cycle modes. If the issue persists, contact support. |
| Mappable back buttons are not responding. | Re-map the buttons following the instructions in the 'Customization' section. Ensure the mapping process is completed correctly by pressing the Function Button to save. |
| Motion controls are inaccurate or unresponsive. | Calibrate the motion controls through your Nintendo Switch system settings. Ensure the controller has a clear line of sight to the console if docked, and that you are holding it steadily. |
| Lyhyt akunkesto. | Ensure the controller is fully charged before use. Reduce RGB lighting brightness or turn it off to conserve battery. Battery performance may degrade over time with usage. |
Tekniset tiedot
- Mallinumero: Vahvistetaan myöhemmin-8104-95
- Liitettävyys: Wireless (Low Latency)
- Langaton kantama: Jopa 30 jalkaa
- Akun kesto: Jopa 40 tuntia yhdellä latauksella
- Latausportti: USB-C
- Yhteensopivuus: Nintendo Switch, Nintendo Switch Lite, Nintendo Switch OLED, Nintendo Switch 2
- Mitat: 6.3 x 2.56 x 5.32 tuumaa
- Paino: 12.6 unssia
- Erikoisominaisuudet: TMR Thumbsticks, Customizable RGB Lighting (4 modes), C Button for Gamechat, Dual Mappable Quick-Action Back Buttons, Built-In Motion Controls, Textured Grips
Takuu ja tuki
This product comes with a manufacturer's warranty. For detailed warranty information, technical support, or to register your product, please visit the official Turtle Beach websivustolta tai ota yhteyttä suoraan heidän asiakaspalveluunsa. Säilytä ostokuitti takuuvaatimuksia varten.
Online-tuki: www.turtlebeach.com/support
