LEKATO 2-in-1 Drum Looper Pedal (Model BCUSM03626) Instruction Manual

1. Tuote ohiview

The LEKATO 2-in-1 Drum Looper Pedal is a versatile guitar effect pedal combining a high-sampling-rate looper with a built-in drum machine. It operates at 44.1 kHz, 24-bit, offering both looping and drum functions independently or simultaneously.

Kuva 1: Etuosa view of the LEKATO LP-02 2-in-1 Drum Looper Pedal, highlighting its dual functionality as a looper and drum machine.

2. Asennusohjeet

2.1 Virtalähde

This pedal requires a 9V DC negative-center power adapter (not included). Ensure the power supply provides less than 80 mA. Do not use a power supply with different specifications to avoid damage to the unit.

2.2 Liitännät

1. Liitä kitarasi tai muu soittimesi siihen V TULO polkimen oikealla puolella oleva tunkki.
2. Yhdistä V OUTPUT polkimen vasemmalla puolella oleva tunkki omaan amplifier- tai next-efektipedaali.
3. Connect the 9V DC power adapter to the power input jack.

2.3 Buffer Bypass

The pedal features Buffer Bypass, which helps maintain signal strength over long cable runs or when using multiple pedals. This prevents tone loss that can occur due to cable capacitance in True Bypass systems.

Figure 2: Detail of the footswitch, indicating the Buffer Bypass functionality for signal integrity.

3. Käyttö

3.1 Ohjaimet ohiview

• LOOP Knob: Säätää tallennetun silmukan toiston äänenvoimakkuutta.
• RUMMUN NUPPI: Säätää rumpukoneen toiston äänenvoimakkuutta.
• DRUM SELECT Knob: Selects one of the 8 available drum styles. This knob is analog and not notched, requiring careful adjustment to select the desired style.
• Jalkakytkin: A multi-function switch used for recording, playback, overdubbing, undo/redo, and tap tempo.
• LED-ilmaisin: A single multi-colored LED indicates the pedal's status (e.g., recording, playing, overdubbing, drum tempo). Refer to the quick start guide for specific LED patterns and colors.

Figure 3: The three control knobs for adjusting loop volume, drum volume, and selecting drum styles.

3.2 Looper Module

The looper module offers up to 6 minutes of recording time and supports unlimited overdubs. Recorded tracks are automatically saved.

• Tallennus: Press the footswitch once to start recording. The LED will indicate recording status.
• Toisto: Press the footswitch again to stop recording and start playback.
• Overdub: During playback, press the footswitch once to start overdubbing. Press again to stop overdubbing.
• Kumoa/tee uudelleen: Hold the footswitch for approximately 5 seconds to undo the last recorded layer. Repeat to redo.
• Stop: Pysäytä toisto painamalla jalkakytkintä kahdesti.
• Tyhjennä: While stopped, hold the footswitch for an extended period (e.g., 15 seconds as per some documentation, but often shorter in practice) to clear the entire loop.

Files can be exported or imported using dedicated software (refer to manufacturer's website for software details).

Figure 4: The looper module's key features, including its 6-minute loop capacity and data management options.

3.3 Drum Machine Module

The built-in drum machine features 8 musical styles, each with real drum samples. It includes a tap tempo function.

• Selecting Drum Style: Käytä DRUM SELECT knob to choose one of the 8 available drum styles (e.g., Blues, Rock, Pop, Country, Metal, Ballad, R&B, Dance).
• Napauta Tempo: While the drum machine is playing, tap the footswitch at your desired tempo to adjust the drum speed. The drum speed can also automatically match the tempo of a 4/4 time phrase when used with the looper.

Figure 5: The drum machine functionality, detailing the variety of grooves and real drum sampvähemmän saatavilla.

4. Huolto

• Pidä poljin puhtaana pyyhkimällä se pehmeällä, kuivalla liinalla. Vältä hankaavien puhdistusaineiden tai liuottimien käyttöä.
• Säilytä poljinta kuivassa paikassa, poissa äärimmäisistä lämpötiloista ja kosteudesta.
• Ensure all cable connections are secure before and after use.
• Irrota aina virtalähde, kun poljinta ei käytetä pitkään aikaan.

5. Vianmääritys

5.1 Ei virtaa

• Ensure the 9V DC negative-center power adapter is correctly connected and functioning.
• Varmista, että pistorasia on aktiivinen.

5.2 Ei ääntä

• Tarkista kaikki tulo- ja lähtökaapeliliitännät.
• Ensure the LOOP and DRUM volume knobs are not set to minimum.
• Test with different cables and an amplifier to rule out external equipment issues.

5.3 Difficulty with Footswitch Functions

• The single footswitch performs multiple functions based on the number, duration, and order of presses. Refer to the 'Operation' section and practice the specific press sequences for recording, playback, overdub, undo/redo, and tap tempo.
• Consistent timing is crucial for accurate loop recording and drum tempo setting.

5.4 Unclear LED Indications

• The single multi-colored LED indicates various statuses. Consult the quick start guide or manufacturer's documentation for a detailed explanation of LED color and flash patterns.

6. Tekniset tiedot

Figure 6: Physical dimensions of the LEKATO 2-in-1 Drum Looper Pedal.

7. Takuu ja tuki

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official LEKATO websivusto. Tarkat takuuehdot voivat vaihdella alueittain ja jälleenmyyjiltä riippuen.