T-SUN Rechargeable LED Wall Light with Motion Sensor

1. Johdanto

Thank you for choosing the T-SUN Rechargeable LED Wall Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new wall light. Please read this manual thoroughly before use and retain it for future reference.

2. Turvallisuustiedot

• This product is designed for indoor use. While durable, avoid direct exposure to heavy moisture or extreme temperatures.
• Do not attempt to disassemble or modify the light. This may cause damage and void the warranty.
• Pidä valo poissa syttyvistä materiaaleista.
• Käytä lataamiseen ainoastaan ​​mukana toimitettua Type-C-kaapelia.
• Ensure the mounting surface is clean and dry before installation.

3. Pakkauksen sisältö

Tarkista pakkauksesta seuraavat tuotteet:

• T-SUN LED Wall Light (x2)
• Kaukosäädin (x1)
• C-tyypin latauskaapeli (x1)
• Mounting Plates (x2)
• Ruuvit ja seinätulpat (ruuviasennusta varten)
• Foam Adhesive Pads (for adhesive installation)
• Käyttöopas (tämä asiakirja)

4. Tuote ohiview

Familiarize yourself with the components and features of your T-SUN LED Wall Light.

Kuva 1: Tuotteen osat
This diagram illustrates the key features of the wall light, including its matte black design, ABS+PC material construction, Type-C charging port, integrated on/off switch, motion sensor, and adjustable light design.

• Mattamusta muotoilu: Modern and minimalist aesthetic.
• ABS + PC Material: Durable and corrosion-resistant construction.
• Type-C latausportti: Kätevään ja nopeaan lataukseen.
• Päälle/pois-kytkin: Manual control for power.
• Liiketunnistin: Detects movement for automatic illumination.
• Adjustable Light Design: Allows customization of beam angle.

5. Latausohjeet

Before first use, fully charge the wall light. The light features a 3600mAh rechargeable battery.

Kuva 2: Latausprosessi
This image shows the Type-C charging port and the indicator lights. A red light indicates charging, and a green light indicates a full charge. Compatible charging sources include standard chargers, laptops, power banks, and Type-C sockets.

1. Locate the Type-C charging port on the side of the wall light.
2. Connect the provided Type-C cable to the light and to a compatible USB power source (e.g., wall adapter, computer USB port, power bank).
3. A punainen merkkivalo will illuminate, indicating that the light is charging.
4. Täysi lataus kestää yleensä noin 7 tuntia.
5. Kun lataus on valmis, merkkivalo syttyy vihreä.

Akun kesto:

• Continuous ON Mode: 14 to 60 hours (depending on brightness setting).
• Liiketunnistimen tila: Over 1000 activations on a full charge.

6. Asennus

The T-SUN wall light offers two installation methods: adhesive mounting or screw mounting.

Kuva 3: Asennusvaiheet
This image demonstrates both adhesive and screw-based installation methods. Both methods involve attaching a mounting plate to the wall first, then securely snapping the wall light onto the plate.

Method 1: Adhesive Mounting (for smooth surfaces)

1. Puhdista ja kuivaa haluttu seinäpinta huolellisesti.
2. Peel off the protective film from the foam adhesive pad and firmly press it onto the back of the mounting plate.
3. Remove the remaining protective film from the adhesive pad and press the mounting plate firmly onto the wall for at least 30 seconds.
4. Align the wall light with the mounting plate and snap it into place, ensuring the switch faces downwards.

Method 2: Screw Mounting (for all surfaces)

1. Mark the desired installation location on the wall.
2. Drill two holes at the marked positions, insert the wall plugs, and then secure the mounting plate to the wall using the provided screws.
3. Align the wall light with the mounting plate and snap it into place, ensuring the switch faces downwards.

The wireless design allows for versatile placement in areas such as living rooms, bedrooms, hallways, and staircases.

7. Toimintatilat

The T-SUN wall light offers three operating modes, selectable via a toggle switch on the unit or the remote control.

Figure 4: Lighting Modes
This image illustrates the three available lighting modes: Auto Mode (motion-activated), Always ON Mode (continuous illumination), and OFF Mode (light is completely off).

• Auto Mode (Motion Sensor): In dark conditions, the light will automatically turn on for 20-30 seconds when motion is detected within a 3-5 meter range and a 120° detection angle. It will turn off automatically after 22 seconds of no movement.
• Aina päällä -tila: The light remains continuously illuminated until manually switched off or the battery depletes.
• OFF -tila: The light is completely off and will not activate.

8. Säädettävät asetukset

Customize your lighting experience with adjustable brightness and beam angle.

Figure 5: Adjustable Beam Angle and Brightness
This image demonstrates the flexibility of the light, allowing users to adjust the beam angle from 0° to 120° and select between high and low brightness modes. Various lighting patterns, including pure upward, pure downward, and combined, are shown.

• Säteen kulman säätö: The internal light guide can be manually adjusted from 0° to 120°. This allows for pure upward, pure downward, or combined upward and downward lighting to suit your preference.
• Kirkkaustasot: The light offers two brightness levels (High and Low) for 3000K warm white illumination. These can be adjusted via the remote control.

9. Kaukosäätimen käyttö

The included remote control provides convenient access to various functions of the wall light.

Kuva 6: Kaukosäätimen toiminnot
This image displays the remote control, highlighting its various buttons for power on/off, brightness adjustment, switching between Auto and Continuous modes, and setting a timer for 10, 20, or 30 minutes.

• Virtapainike: Turns the light On or Off.
• Tilan valinta: Switch between Auto (motion sensor) and Continuous (Always ON) modes.
• Kirkkauden säätö: Lisää tai vähennä valon voimakkuutta.
• Ajastintoiminto: Set the light to turn off automatically after 10, 20, or 30 minutes.

10. Huolto

To ensure the longevity and optimal performance of your T-SUN wall light, follow these simple maintenance guidelines:

• Puhdistus: Pyyhi valaisimen pinta pehmeällä, kuivalla liinalla. Älä käytä hankaavia puhdistusaineita tai liuottimia, sillä ne voivat vahingoittaa pintaa.
• Akun hoito: For best battery life, avoid completely draining the battery frequently. Recharge the light when the brightness noticeably diminishes.
• Anturin puhdistus: Ensure the motion sensor lens is clean and free from dust or obstructions for accurate detection.

11. Vianmääritys

If you encounter any issues with your wall light, please refer to the following common problems and solutions:

• Valo ei syty:
  • Tarkista, onko akku ladattu. Lataa tarvittaessa.
  • Ensure the light is not in OFF mode. Switch to Auto or Always ON mode.
  • In Auto mode, verify there are no obstructions blocking the motion sensor.
• Motion sensor is not detecting movement:
  • Ensure the light is in Auto mode.
  • Tarkista, onko anturin edessä esteitä.
  • Verify the ambient light conditions; the sensor primarily activates in low light.
• Akun käyttöikä on odotettua lyhyempi:
  • Varmista, että valo on ladattu täyteen.
  • Higher brightness settings consume more power. Try a lower brightness setting.
  • Frequent activations in Auto mode will reduce battery life.
• Kaukosäädin ei toimi:
  • Varmista, ettei kaukosäätimen ja valon välissä ole esteitä.
  • Tarkista, tarvitseeko kaukosäätimen paristo vaihtaa.

12. Tekniset tiedot

13. Takuu ja asiakastuki

T-SUN is committed to customer satisfaction. If you have any concerns regarding the quality or operation of your wall light, please do not hesitate to contact our dedicated customer service team. We are ready to assist you and ensure a positive experience with our product.

Katso tarkemmat takuutiedot ja yhteystiedot ostodokumentaatiosta.