1. Johdanto
The diymore U-18 USB Tester Meter is a versatile diagnostic tool designed for monitoring and analyzing USB power delivery. It provides real-time data on voltage, current, power, capacity, and supports various fast charging protocols. This manual provides instructions for the proper setup, operation, and maintenance of your device.
2. Turvallisuustiedot
- Älä altista laitetta kosteudelle tai äärilämpötiloille.
- Vältä laitteen pudottamista tai altistamista voimakkaille iskuille.
- Älä yritä purkaa tai muokata laitetta. Luvattomat muutokset voivat mitätöidä takuun ja aiheuttaa turvallisuusriskejä.
- Ensure connections are secure before applying power.
- Operate the device within its specified voltage ja virtarajat vahinkojen estämiseksi.
3. Tuote ohiview
The diymore U-18 features a 1.77-inch TFT color LCD screen for clear data display and multiple input/output ports for broad compatibility.
Figure 3.1: diymore U-18 USB Tester Meter showing its various ports and functionalities.
Figure 3.2: Detailed diagram illustrating the input/output ports and control keys of the U-18 tester.
Tärkeimmät ominaisuudet:
- 1.77 tuuman TFT-näyttö: High-definition display for real-time monitoring of charging data.
- Multi-functional Interfaces: Seven distinct display interfaces for various data presentations.
- Fast Charging Protocol Support: Compatible with PD, QC2.0, QC3.0, and other protocols.
- Kattava datanäyttö: Näyttää voltage, current, power, energy, capacity, and fast charging protocol status.
- Cable Internal Resistance Measurement: Utilizes the voltage drop method to calculate cable resistance.
4. Asennus
4.1 Pakkauksen sisältö
- diymore U-18 USB Tester Meter
4.2 Ensimmäinen yhteys
To begin using the U-18 USB Tester Meter, connect it inline between your power source (charger, power bank) and the device you wish to test.
- Connect the USB-A Input (4V-24V) or Type-C Input port of the U-18 to your power source.
- Connect the USB-A Out (0-6.5A) or Type-C Output port of the U-18 to your device (e.g., smartphone, tablet, laptop).
- Näyttö käynnistyy automaattisesti ja alkaa näyttää reaaliaikaisia mittaustietoja.
5. Käyttöohjeet
5.1 Basic Measurement Display
Upon connection, the tester will display key parameters on its 1.77-inch TFT screen.
Figure 5.1: The tester's display showing voltage, current, power, energy, capacity, and fast charging protocol information.
- Voitage Näyttö: Näyttää reaaliaikaisen voltage (V).
- Nykyinen näyttö: Shows the real-time current (A).
- Virranäyttö: Shows the real-time power (W).
- Energiatilastot: Accumulates total energy consumed (Wh).
- Capacity Statistics: Accumulates total charge capacity (Ah).
- Fast Charging Protocol Display: Indicates detected fast charging protocols (e.g., PD, QC2.0, QC3.0).
5.2 Navigating Display Interfaces
The U-18 offers 7 types of display interfaces. Use the KEY - ja KEY + buttons (labeled 2 and 3 in Figure 3.2) to cycle through different display modes and settings.
Kuva 5.2: Esimamples of various display interfaces, including system settings, simple measurement, detailed settings, ripple measurement, and protocol detection.
5.3 Cable Internal Resistance Measurement
This feature allows you to assess the quality of your USB cables.
Figure 5.3: The tester connected to a power source and device, displaying cable resistance measurement.
- Connect the U-18 to a power source.
- Navigate to the "Cable Measurement" interface (refer to Figure 5.2).
- Connect the cable you wish to test between the U-18's output and a load (e.g., a device drawing current).
- The system will automatically calculate and display the cable's internal resistance. A lower resistance indicates a better quality cable.
5.4 Näytön suunta
To toggle the display orientation, long-press the KEY + button (labeled 3 in Figure 3.2).
6. Huolto
- Keep the device clean and dry. Use a soft, dry cloth to wipe the screen and casing.
- Vältä hankaavien puhdistusaineiden tai liuottimien käyttöä.
- Säilytä laitetta viileässä, kuivassa paikassa, kun sitä ei käytetä.
7. Vianmääritys
- Ei näyttöä: Ensure the tester is properly connected to a power source and a load. Check if the power source is active.
- Epätarkkoja lukemia: Verify that all connections are secure. Ensure the power source and load are functioning correctly. Readings can be affected by poor quality cables or unstable power sources.
- Laite ei lataudu: Check the connections between the tester, power source, and device. Ensure the power source is providing sufficient power.
- Cable Resistance Reads 9999.9Ω: This typically indicates an open circuit or a very poor connection in the cable being tested. Re-check cable connections.
8. Tekniset tiedot
Figure 8.1: Detailed product specifications for the diymore U-18 USB Tester Meter.
| Parametri | Alue | Resoluutio | Tarkkuus |
|---|---|---|---|
| Monitoring Voitage | DC 4-24V | 0.00001V | ± (0.2% + 2) |
| Virran valvonta | 0-6.5A | 0.00001A | ± (0.5% + 2) |
| Monitoring Power | 0-156W | 0.00001W | ± (0.5% + 2) |
| D+/D- Voitage | 0-3.3V | 0.001V | ± (1.0% + 2) |
| Kapasiteetti | 0-9999.99AH | 0.00001 Ah | - |
| Virrankulutus | 0-9999.99WH | 0.00001 Wh | - |
| Cable Internal Resistance | 0-9999.9Ω | 0.000001Ω | - |
| Equipment Runtime | 99 days 23:59:59 seconds | 1 sekuntia | - |
| Tallennusaika | 999:59:59 | 1 sekuntia | - |
- Mitat: 2.56 x 1.38 x 0.49 tuumaa
- Tuotteen paino: 1.41 unssia (0.04 kiloa)
- Virtalähde: Battery Powered (internal, charged via USB connection)
- Mittaustyyppi: Yleismittari
9. Takuu
This product comes with a standard manufacturer's warranty. Please refer to the product packaging or contact diymore customer support for specific warranty terms and conditions.
10. Tukea
For technical assistance, troubleshooting, or further inquiries, please contact diymore customer support through the retailer's platform or the official diymore websivusto.