Redodo 12V 100Ah LiFePO4 -akun ja 14.6V 40A -laturin käyttöohje

1. Johdanto

This manual provides essential information for the safe and efficient use of your Redodo 12V 100Ah LiFePO4 Battery and accompanying 14.6V 40A Charger. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your product.

2. Tuote ohiview

2.1 Pakkauksen sisältö

• 12.8 V 100 Ah LiFePO4 -akku, ryhmä 24
• M8- 5/8"(16mm) Terminal Bolts
• Insulating Caps for the Bolts
• 14.6V 40A LiFePO4-akkulaturi

2.2 Tärkeimmät ominaisuudet

• Kompakti muotoilu: BCI Group 24 size, 25% smaller volume than previous models, offering 1280Wh energy capacity.
• Pidennetty käyttöikä: Up to 15,000 cycles (@60% DOD) and a 10-year lifespan, significantly outperforming lead-acid batteries.
• Pikalataus: The included 14.6V 40A charger provides efficient charging, capable of fully charging a 12V 200Ah LiFePO4 battery in approximately 5 hours.
• Edistynyt turvallisuus: Equipped with a 100A Battery Management System (BMS) and Grade A cells, offering over-temperature, output short-circuit, reverse polarity, output over-voltage, overcharging, over-discharging, and overcurrent protection. Features a pre-charge mode to reactivate 0V batteries.
• Kevyt: Weighs only 21.6 lbs, approximately 1/3 the weight of a 12V 100Ah AGM battery.
• Monipuoliset sovellukset: Ihanteellinen matkailuautoille, camping, solar panel systems, off-grid setups, and kayak trolling motors.

Figure 1: Redodo 12V 100Ah LiFePO4 Battery and 14.6V 40A Charger.

Figure 2: Internal structure highlighting the 100A BMS and EV-grade A cells, providing over 20 types of protection including precharge function, temperature protection, over-charge, over-discharge, short-circuit, and over-current protection.

Figure 3: Size comparison showing the Redodo Group 24 LiFePO4 battery is 25% more compact while maintaining 1280Wh of usable energy. Dimensions are 10.24 in (L), 6.61 in (W), 8.27 in (H).

3. Turvallisuustiedot

Always adhere to the following safety guidelines when handling and operating the battery and charger:

• Älä oikosulje akun napoja.
• Do not expose the battery to fire, heat, or direct sunlight.
• Älä upota akkua veteen tai muihin nesteisiin.
• Use only the specified 14.6V 40A LiFePO4 charger or a compatible LiFePO4 charger.
• Varmista asianmukainen ilmanvaihto latauksen ja purkauksen aikana.
• Käytä asianmukaisia ​​henkilönsuojaimia, kuten käsineitä ja silmäsuojaimia, käsitellessäsi akkuja.
• Pidä poissa lasten ulottuvilta.
• Do not attempt to open or disassemble the battery or charger.
• Hävitä paristot paikallisten määräysten mukaisesti.

4. Asennus ja asennus

4.1 Battery Placement

The Redodo 12V 100Ah LiFePO4 battery is designed to fit standard Group 24 battery boxes. Ensure the battery is placed in a stable, dry, and well-ventilated area, away from direct heat sources or flammable materials.

4.2 Akun kytkeminen

1. Ensure all loads are disconnected before connecting the battery.
2. Connect the positive (+) terminal of the battery to the positive (+) terminal of your system.
3. Connect the negative (-) terminal of the battery to the negative (-) terminal of your system.
4. Use the provided M8 terminal bolts and insulating caps to secure connections. Ensure all connections are tight to prevent arcing and overheating.

4.3 Laturin liitäntä

The 14.6V 40A charger is designed for ease of use. Connect the charger's output cables to the battery terminals (red to positive, black to negative) before plugging the charger into an AC power source. The charger features fixing hole positions for secure mounting if desired.

Figure 4: The Redodo LiFePO4 battery is suitable for various applications including motor homes, trailer RVs, vans, and trolling motors.

5. Käyttöohjeet

5.1 Akun lataaminen

Use the provided Redodo 14.6V 40A LiFePO4 charger. Connect the charger to the battery, then plug the charger into a standard AC outlet. The charger's pre-charge mode can reactivate a battery that has been discharged to 0V. Charging times vary based on battery capacity:

Figure 5: Reference charging times for various battery capacities using the 14.6V 40A charger. For example, a 100Ah battery takes approximately 2.5 hours, and a 200Ah battery takes about 5 hours.

Other recommended charging methods include:

• 12V (14.6V) 20Amp LiFePO4 Battery Charger (approx. 5 hours for 100Ah)
• Solar Panels (400W+ MPPT, within one sunny day)
• Generator (20A AC-DC Charger, approx. 5 hours for 100Ah)
• Alternator (20A DC-DC Charger, approx. 5 hours for 100Ah)

Figure 6: Visual representation of recommended charging methods including dedicated LiFePO4 chargers, solar panels with MPPT, generators, and alternators.

5.2 Purkaus

The battery is designed for deep cycle applications and can be discharged to 100% Depth of Discharge (DOD). The 100A BMS protects against over-discharging. Ensure your load does not exceed the battery's continuous discharge current rating.

5.3 Parallel and Series Connections

For increased capacity or voltage, multiple Redodo LiFePO4 batteries can be connected in parallel or series. Refer to the specific guidelines for parallel/series connections to ensure proper balancing and safe operation. It is recommended to use batteries of the same model and state of charge for optimal performance.

6. Huolto

• Säännöllinen tarkastus: Tarkista akun navat säännöllisesti korroosion tai löysien liitosten varalta. Puhdista tarvittaessa.
• Varastointi: Jos akkua säilytetään pitkään, varmista, että se on ladattu noin 50 %:n varaustilaan ja säilytä viileässä ja kuivassa paikassa. Vältä äärimmäisiä lämpötiloja.
• Puhdistus: Keep the battery and charger clean and free from dust and debris. Use a dry cloth for cleaning.

7. Vianmääritys

8. Tekniset tiedot

Figure 7: Dimensions of the Redodo 12.8V 100Ah LiFePO4 battery (10.24"L x 6.61"W x 8.27"H) compared to a larger 12V 100Ah Group 31 battery.

Kuva 8: Päättynytview of key features including 10 years lifespan, 4000+ cycles at 100% DOD, Group 24 size, and the powerful BMS.

9. Takuu ja tuki

Redodo tarjoaa mm. 5 vuoden takuu on this product, ensuring reliability and customer satisfaction. The battery is designed for a 10 vuoden elinikä normaaleissa käyttöolosuhteissa.

For technical assistance, troubleshooting, or warranty claims, please contact Redodo customer support. We aim to provide a 24 tunnin vasteaika to inquiries.

You can find more information and contact details on the official Redodo websivustosi tai ostoalustasi kautta.