Pedrollo PKm 60/24CL Hydropneumatic Pump User Manual

Johdanto

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Pedrollo PKm 60/24CL Hydropneumatic Pump. Please read this manual thoroughly before attempting to install or operate the unit. Retain this manual for future reference.

Turvallisuustiedot

VAROITUS: Näiden turvallisuusohjeiden noudattamatta jättäminen voi aiheuttaa sähköiskun, tulipalon, vakavan loukkaantumisen tai kuoleman.

• Katkaise aina virta ennen minkään huollon tai huollon suorittamista.
• Ensure the electrical supply matches the pump's requirements (voltage, taajuus).
• Kaikki sähköliitännät on teetettävä pätevän sähköasentajan toimesta, ja niiden on oltava paikallisten määräysten mukaisia.
• Do not operate the pump without water, as this can cause severe damage.
• Pidä lapset ja luvattomat henkilöt poissa pumpun läheltä käytön aikana.
• Install the pump in a well-ventilated area, protected from direct sunlight and freezing temperatures.
• Varmista yksikön oikea maadoitus.

Tuote loppuview

The Pedrollo PKm 60/24CL is a compact hydropneumatic pump system designed to maintain constant water pressure in domestic and small commercial applications. It integrates a 0.50 HP pump with a 24-liter pre-charged tank, ensuring efficient and reliable water supply.

Image: Pedrollo PKm 60/24CL Hydropneumatic Pump. This image shows the complete hydropneumatic unit, featuring the blue 24-liter tank, the electric pump mounted on top, and the flexible connection hose.

Tärkeimmät komponentit:

• Sähköpumppu: 0.50 HP motor for efficient water transfer.
• Pressure Tank: 24-liter capacity, pre-charged to maintain stable water pressure.
• Painekytkin: Automatically controls pump operation based on system pressure.
• Painemittari: Displays current system pressure.
• Flexible Connection Hose: Connects the pump to the pressure tank.

Asennus ja asennus

Oikea asennus on ratkaisevan tärkeää pumpun suorituskyvyn ja pitkän käyttöiän kannalta. Jos olet epävarma jostakin vaiheesta, ota yhteyttä pätevään ammattilaiseen.

1. Sijainti: Choose a dry, well-ventilated area, protected from frost and direct sunlight. The pump should be installed as close as possible to the water source.
2. Asennus: Secure the unit on a stable, level surface to minimize vibration and noise.
3. Putkiliitännät:
   • Connect the suction pipe from the water source to the pump's inlet. Ensure the suction line is airtight to prevent air ingress.
   • Connect the discharge pipe from the pump's outlet to your water distribution system.
   • Use appropriate fittings and sealants to prevent leaks.
   • Install a check valve on the suction line if the water source is below the pump.
4. Sähköliitäntä:
   • Varmista, että virtalähde vastaa pumpun teknisiä tietoja (tilavuustage, taajuus).
   • Connect the pump to a dedicated, properly grounded electrical circuit with appropriate overcurrent protection.
   • All electrical work must comply with local electrical codes and be performed by a licensed electrician.
5. Pumpun esitäyttö:
   • Before initial startup, remove the priming plug (usually on top of the pump body).
   • Täytä pumppu casing completely with clean water until it overflows.
   • Kiinnitä ilmaustulppa tukevasti takaisin.

Käyttöohjeet

The Pedrollo PKm 60/24CL operates automatically to maintain constant water pressure.

1. Ensimmäinen käynnistys:
   • After priming, open a faucet in your system to allow air to escape.
   • Turn on the electrical power to the pump.
   • The pump will start and build pressure. Once the cut-off pressure is reached, the pump will stop.
   • Close the faucet. The pump should remain off.
2. Automaattinen toiminta:
   • When water is drawn from the system (e.g., opening a faucet), the pressure will drop.
   • The pressure switch will detect this drop and automatically start the pump.
   • The pump will run until the system pressure reaches the pre-set cut-off pressure, then it will stop.
   • This cycle ensures a continuous and stable water supply.
3. Valvonta: Periodically check the pressure gauge to ensure the system is operating within expected pressure ranges.

Huolto

Regular maintenance ensures optimal performance and extends the life of your hydropneumatic pump.

• Tarkista vuodot: Regularly inspect all plumbing connections for leaks. Tighten or repair as necessary.
• Tank Air Pressure: The pressure tank contains a pre-charged air bladder. Periodically check the air pressure in the tank (when the pump is off and system pressure is zero) and recharge if necessary according to manufacturer specifications (typically 1.5 to 2 bar, or 22-29 PSI, but refer to tank label).
• Puhtaus: Keep the pump and motor clean and free from dust and debris to ensure proper ventilation.
• Talvikäyttö (jos mahdollista): If the pump is in an area subject to freezing temperatures, drain the pump and pipes completely to prevent damage from ice expansion.
• Sähköliitännät: Periodically check electrical connections for corrosion or looseness.

Vianetsintä

Jos ongelmat jatkuvat näiden ratkaisujen kokeilemisen jälkeen, ota yhteyttä pätevään huoltoteknikkoon.

Tekniset tiedot

• Malli: Pedrollo PKm 60/24CL
• Moottorin teho: 0.50 hv
• Säiliön tilavuus: 24 litraa
• Virtalähde: Sähkökaapeli
• Materiaali: Plastic (Note: While "Plastic" is listed, key pump components are typically cast iron or stainless steel for durability.)
• Tyyli: Teollinen
• Sovellus: Domestic water supply, irrigation systems, pressurization.
• Automatic System: Maintains constant pressure without manual operation.

Takuu ja tuki

For warranty information, technical support, or to locate authorized service centers, please refer to the documentation provided with your purchase or visit the official Pedrollo websivusto. Säilytä ostokuitti takuuvaatimuksia varten.

Pedrollo Official Websivusto: www.pedrollo.com