DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. Turvallisuustiedot

VAROITUS: Lue ja ymmärrä aina kaikki turvallisuusvaroitukset ja ohjeet ennen tämän työkalun käyttöä. Varoitusten ja ohjeiden noudattamatta jättäminen voi johtaa sähköiskuun, tulipaloon ja/tai vakavaan loukkaantumiseen.

• Käytä aina suojalaseja tai sivusuojilla varustettuja suojalaseja ja tarvittaessa kokokasvosuojusta käyttäessäsi tätä tuotetta.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. Tuote ohiview

Pakkauksen sisältö

• Langaton Brad Nailer
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• 2.0 Ah Li-ion akku
• 1 tunnin pikalaturi
• Kantolaukku
• Käyttöohje

Työkalun komponentit

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

Mitat ja paino

Figure 2: Physical dimensions and weight of the nailer (without battery).

• Pituus: 10.83 tuumaa (27.5 cm)
• Leveys: 9.45 tuumaa (24 cm)
• Weight: 6.19 lbs (without battery)

3. Asennus

Akun asennus

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. Kohdista akku työkalun akkupaikkaan.
3. Liu'uta akku lokeroon, kunnes se napsahtaa tukevasti paikalleen.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. Paina vapautuspainiketta ja vedä lehden kansi ulos.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. Sulje lehtien kansi, kunnes se napsahtaa vapautuspainikkeeseen.

Naulata Viewer ikkuna

Kynsi viewer window allows you to quickly check the fastener level. When the window shows punainen, it indicates the magazine is without nails. When it shows musta, it indicates the magazine contains nails.

4. Käyttöohjeet

Laukaisutilat

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Figure 4: Firing mode selection switch.

Yksittäinen laukaisutila

• Shift the mode switch to the vasen puoli (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

Ota yhteys laukaisutilaan

• Shift the mode switch to the oikea puoli (contact firing icon).
• Purista liipaisinta.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

Huomautus: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

Syvyyssäätö

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

LED Valaistus

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

LED-ilmaisin

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• Punainen päällä: Akku vähissä.
• Punainen vilkkuva: Nails/staples are jammed.
• Vihreä päällä: No nails/staples in the magazine.
• Vihreä vilkkuu: Ylikuumentua.
• Valo pois: Normaali toimintatila.

Virallinen tuotevideo

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. Huolto

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

Akun hoito

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• Säilytä akkua viileässä, kuivassa paikassa suojassa suoralta auringonvalolta ja äärimmäisiltä lämpötiloilta.

6. Vianmääritys

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. Tekniset tiedot

Yhteensopivat kiinnikkeet

Figure 9: Compatible nail and staple types.

8. Takuu ja tuki

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH website. Ensure you have your model number (024009) and purchase details available when contacting support.