OKAI Electric Kick Scooter ES20 käyttöohje

1. Asennus ja kokoonpano

This section guides you through the initial setup and assembly of your OKAI Electric Kick Scooter ES20.

1.1 Laatikon purkaminen ja mukana tulevat komponentit

Carefully open the packaging and remove all components. Ensure all items listed below are present.

Figure 1: OKAI Electric Kick Scooter ES20

Laatikon tulee sisältää:

• OKAI Electric Kick Scooter ES20 (main unit)
• Laturi
• Valve Extension
• Ruuvi
• Allen avain
• NFC-kortti
• Takuukortti
• Ohjekirja

1.2 Kokoamisvaiheet

Kokoa skootteri noudattamalla näitä ohjeita:

1. Remove the head of the e-scooter from the foam packaging.
2. Connect the head harness to the front tube harness. Ensure the connection is secure.
3. Insert the head of the e-scooter into the front tube.
4. Unlock the handle, lift the front tube up, and then re-lock the handle. Important: Make sure the front tube is straight and tightly locked before every ride for safety.
5. Use the provided Allen key to tighten the screws on the front tube and the hoop. This ensures stability during operation.

1.3 Ensimmäinen lataus

Before the first use, it is crucial to fully charge your e-scooter to activate the vehicle and ensure optimal battery performance.

• Connect the charger to the charging port located on the scooter's deck.
• Plug the charger into a power outlet. The indicator light on the charger will change to show charging status.
• Allow the e-scooter to charge completely before its first use.

2. Käyttöohjeet

Learn how to operate your OKAI Electric Kick Scooter ES20 safely and efficiently.

2.1 Virta päälle/pois

• To turn on the e-scooter, press the power button located on the handlebar. The display will illuminate.
• To turn it off, simply hold the power button for approximately 3 seconds.

Figure 2: Handlebar display showing power button and mode indicator.

2.2 Switching Speed Modes and Headlight

Your scooter features multiple speed modes and a headlight for varying riding conditions.

• To switch gears (speed modes), double-click the power button while in riding mode.
• The modes are indicated on the display:
• 'E' (Pedestrian Mode): Headlights flash, max speed 5 km/h (3 mph).
• 'L' (Economy Mode): Max speed 15 km/h (9.3 mph).
• 'H' (Sports Mode): Max speed 25 km/h (15.5 mph).
• To turn the headlight on and off, quickly press the power button.

2.3 Riding Basics

The OKAI ES20 is designed for intuitive riding:

• Käynnistyspotku: To engage the motor, you need to push off with your foot to gain some initial speed before pressing the accelerator.
• Kiihtyvyys: Use the thumb throttle to control your speed.
• Jarrutus: The scooter features dual brakes (front electronic brake, rear disc brake) for effective stopping. Apply the brake lever smoothly.

2.4 Taitto ja kannettavuus

The ES20 features a 1-click foldable design for easy storage and transport.

• Paikanna taittomekanismi ohjaustangon ohjainkannattimen pohjan läheltä.
• Engage the release lever to fold the scooter. Ensure it clicks into place when fully folded.
• The compact design allows for convenient carrying, such as up stairs or onto public transport.

Figure 3: ES20 in folded configuration, ready for transport.

2.5 OKAI App Support

Enhance your riding experience by connecting your scooter to the OKAI app.

• The app allows for customization of ambient lights and dashboard interface.
• Personalize your ride mode settings.
• Control features such as NFC and Bluetooth, smart detection, and cruise control directly from the app.

Figure 4: Long deck design for comfortable riding.

3. Huolto

Regular maintenance ensures the longevity and safe operation of your OKAI Electric Kick Scooter ES20.

3.1 Yleishoito

• Pidä skootteri puhtaana pyyhkimällä se vedelläamp liinalla. Vältä korkeapaineisen vesisuihkun käyttöä.
• Store the scooter in a dry, cool place, away from direct sunlight and extreme temperatures.
• The frame is crafted from aircraft-grade aluminum, designed for durability.

3.2 Renkaiden huolto

The ES20 features a front pneumatic tire and a solid rear wheel.

• Regularly check the air pressure of the front pneumatic tire to ensure optimal ride comfort and performance. Refer to the tire sidewall for recommended pressure.
• Inspect both tires for any signs of wear, punctures, or damage.

Figure 5: Front wheel and fender detail.

3.3 Jarrujärjestelmä

The scooter is equipped with a front electronic brake and a rear disc brake.

• Periodically inspect the brake pads and disc for wear. Replace them if necessary.
• Ensure the brake lever operates smoothly and provides adequate stopping power.

Kuva 6: Sivu view highlighting the rear wheel and disc brake.

3.4 Akun hoito

• Käytä aina skootterin mukana toimitettua alkuperäistä laturia.
• Vältä akun täydellistä tyhjentymistä ennen uudelleenlatausta.
• If storing the scooter for an extended period, charge the battery to about 50-70% and recharge every 30-60 days to prevent deep discharge.

4. Vianmääritys

This section addresses common issues you might encounter with your OKAI Electric Kick Scooter ES20.

4.1 Yleiset ongelmat ja ratkaisut

• Issue: Scooter does not turn on.
  Ratkaisu: Ensure the battery is charged. For first use, connect the charger to activate the vehicle. Check all cable connections are secure.
• Issue: Reduced range or battery life.
  Ratkaisu: Actual range can vary based on rider weight, terrain, speed mode, and temperature. Ensure the battery is fully charged. Avoid riding in extreme cold.
• Issue: Charger not working or breaking.
  Ratkaisu: Ensure the charger is properly connected to both the scooter and the power outlet. Check for any visible damage to the charger cable or port. If issues persist, contact customer support for a replacement.
• Issue: Scooter tips over easily when parked.
  Ratkaisu: Ensure the kickstand is fully extended and the scooter is on a flat, stable surface. If the kickstand appears too long or unstable, contact customer support.
• Issue: Motor overheating or sudden stops.
  Ratkaisu: This can occur during prolonged uphill rides or heavy usage. Allow the scooter to cool down. If this happens frequently, reduce continuous heavy load or contact support.
• Issue: Brakes making noise.
  Ratkaisu: This can be normal with new brakes or after exposure to moisture. If the noise is excessive or braking performance is affected, inspect the brake pads and disc for debris or wear.

4.2 Yhteyden ottaminen tukeen

If you encounter issues not covered here or require further assistance, please contact our product support team.

5. Tekniset tiedot

Detailed technical specifications for the OKAI Electric Kick Scooter ES20.

6. Takuu ja tuki

Your OKAI Electric Kick Scooter ES20 comes with a limited warranty.

6.1 Takuutiedot

Please refer to the included Warranty Card for detailed terms and conditions of your limited warranty. This typically covers manufacturing defects for a specified period.

6.2 Asiakastuki

For any questions regarding the maintenance, safe operation, or repair of your OKAI NEON II, please contact our product support team:

• Sähköposti: Support@okai.co
• Puhelin: +18336880336 XNUMX XNUMX XNUMX

Local customer support and quality assurance are provided to ensure your satisfaction.