Einhell Professional GP-PS 18/20 Li BL-Solo Power X-Change Cordless Pruning Saw

1. Tuote ohiview

The Einhell Professional GP-PS 18/20 Li BL-Solo is a versatile and compact cordless pruning saw designed for cutting back and shaping trees and shrubs, shredding green waste, and cutting small sections of wood. As part of the Einhell Power X-Change family, it is compatible with all batteries and chargers from this series. This tool features a brushless motor for enhanced power and extended operating time compared to traditional carbon brush motors. Its compact and lightweight design, combined with a 15 cm cutting length and a chain speed of up to 8 m/s, makes it ideal for flexible garden use.

Figure 1: The Einhell Professional GP-PS 18/20 Li BL-Solo cordless pruning saw, shown with a compatible Power X-Change battery.

2. Turvallisuusohjeet

Always observe the following safety precautions when operating the pruning saw to prevent injury and damage.

Yleiset turvallisuusvaroitukset

• Lue käsikirja: Thoroughly read and understand all instructions and safety warnings before use.
• Käytä henkilönsuojaimia (PPE): Käytä aina suojalaseja, kuulonsuojaimia, käsineitä ja tukevia jalkineita.
• Pidä työalue tyhjänä: Ensure the work area is free from obstacles, debris, and bystanders.
• Vältä kosteita olosuhteita: Do not operate the pruning saw in rain or damp ympäristöissä.
• Työkappaleen kiinnitys: Varmista aina, että leikattava materiaali on vakaa eikä pääse liikkumaan käytön aikana.
• Kahden käden käyttö: Always hold the pruning saw firmly with both hands during operation.
• Takapotkujen estäminen: Be aware of potential kickback and avoid cutting with the tip of the guide bar.

3. Tuotteen osat

Familiarize yourself with the main components of your cordless pruning saw:

Figure 2: Labeled diagram highlighting key features and components of the pruning saw.

• Terälevy ja ketju: High-quality cutting components for precise cuts.
• Käsisuoja: Integrated for user safety during operation.
• Foldable Chain Cover: Provides additional safety and protection.
• Harjaton moottori: Delivers powerful and efficient performance.
• Työkaluton ketjun kiristysnuppi: For easy adjustment of chain tension.
• Öljysäiliö: For automatic chain lubrication.
• Ergonomic Handle with Softgrip: Ensures comfortable and secure handling.

4. Asennus ja kokoonpano

4.1. Akun asennus

1. Ensure the pruning saw is switched off.
2. Align the Power X-Change battery with the battery slot on the tool.
3. Liu'uta akku lokeroon, kunnes se napsahtaa tukevasti paikalleen.
4. Irrota painamalla akun vapautuspainiketta ja liu'uttamalla se ulos.

4.2. Terälevyn ja ketjun kokoonpano

1. Place the guide bar onto the mounting studs.
2. Carefully fit the chain around the sprocket and into the guide bar groove. Ensure the cutting edges of the chain are facing the correct direction.
3. Close the chain cover and secure it.

Figure 3: Proper installation of the guide bar and chain.

4.3. Ketjun kiristys

The pruning saw features tool-free chain tensioning for convenience.

1. Loosen the locking knob on the side of the saw.
2. Turn the red adjustment knob to increase or decrease chain tension. The chain should be snug against the guide bar but still able to be pulled freely by hand.
3. Once tension is correct, tighten the locking knob firmly.

Figure 4: Adjusting chain tension using the tool-free knob.

4.4. Filling the Oil Reservoir for Automatic Lubrication

The pruning saw has an automatic chain lubrication system. Ensure the oil reservoir is filled before each use.

1. Paikanna öljysäiliön korkki.
2. Unscrew the cap and use the provided filling funnel to pour appropriate chain oil into the reservoir.
3. Älä täytä liikaa. Sulje korkki tiiviisti.

Figure 5: Filling the oil reservoir for automatic chain lubrication.

5. Käyttö

5.1. Käynnistys ja pysäytys

• To start: Press the safety lock-off button and then squeeze the trigger switch.
• Pysäyttämiseksi: Vapauta liipaisinkytkin.

5.2. Leikkaustekniikat

Always maintain a firm grip with both hands. Position yourself securely and ensure the workpiece is stable.

• Oksien leikkaaminen: Support the branch if necessary to prevent it from pinching the chain. Make relief cuts if the branch is heavy.
• Tukkien sahaaminen: Place the log on a stable surface or sawhorse. Avoid cutting into the ground.
• Vältä takaiskuja: Never cut with the tip of the guide bar. Always use the bottom edge of the guide bar for cutting.

Figure 6: Demonstrating the pruning saw in action, cutting a log.

6. Huolto ja hoito

Säännöllinen huolto varmistaa optimaalisen suorituskyvyn ja pidentää oksasahan käyttöikää.

6.1. Puhdistus

• Poista akku aina ennen puhdistamista.
• Use a brush or compressed air to remove sawdust and debris from the guide bar, chain, and motor housing.
• Pyyhi ulkopuoli mainoksellaamp kangas. Älä käytä vahvoja kemikaaleja.

6.2. Ketjun teroitus ja vaihto

• A dull chain reduces cutting efficiency and increases kickback risk. Sharpen the chain regularly or replace it when necessary.
• The chain and guide bar can be replaced without tools by following the assembly instructions in Section 4.2.

6.3. Oiling System Check

• Regularly check the oil level in the reservoir.
• Ensure the automatic lubrication system is functioning by observing oil spray from the chain during operation.

7. Vianetsintäopas

Katso tästä taulukosta yleisiä ongelmia ja niiden ratkaisuja:

8. Tekniset tiedot

9. Takuu ja asiakastuki

Einhell offers a 10-year warranty on the brushless motor after online registration. For warranty claims, technical assistance, or spare parts, please contact Einhell customer support.

Valmistajan yhteystiedot:
Eschenstr. 6
94405 Landau an der Isar
Saksa

Please visit the official Einhell website for the most up-to-date contact information and warranty registration details.