Johdanto
This manual provides detailed instructions for the assembly, installation, and operation of your AOC AM102 Adjustable Single Monitor Arm. This monitor mount is designed for 17-32 inch screens, supporting monitors weighing between 4.4 and 19.8 lbs, and is compatible with 75x75mm and 100x100mm VESA patterns. It offers flexible mounting options (C-Clamp and Grommet Base) and full motion adjustment for an ergonomic workspace.
Pakkauksen sisältö
Ennen kokoamisen aloittamista tarkista, että pakkauksessa on kaikki alla luetellut osat:
Image: All components included in the AOC Monitor Arm package, laid out for inspection.
- Monitor Arm Segments (Upper and Lower)
- VESA-kiinnityslevy
- C-Clamp Pohja
- Grommetin pohja
- Tarvikesarja (ruuvit, aluslevyt, kuusiokoloavaimet)
- Muoviset kannet
Asennus ja asennus
Follow these steps carefully to ensure proper and secure installation of your monitor arm.
1. Valitse kiinnitysvaihtoehto
The AOC AM102 offers two installation methods: C-Clamp tai läpivientialusta. Valitse työpöydällesi parhaiten sopiva vaihtoehto.
Image: Illustration of the two mounting options: C-clamp for desk edges and grommet mount for desk holes.
- C-Clamp: Suitable for desks with a thickness between 0.39" and 3.14" (10-80mm).
- Läpivientipohja: Suitable for desks with a thickness between 0.39" and 1.77" (10-45mm) and a hole diameter of 0.39" to 2.36" (10-60mm).
2. Kokoa jalusta
Attach the chosen base component to the main pole. Ensure all screws are tightened securely using the provided Allen wrench.
Video: A user demonstrates the assembly of the monitor arm base, including attaching the C-clamp and securing it to a desk. This video also shows the initial arm segment attachment.
3. Attach Arm Segments
Connect the arm segments to the main pole and to each other. Pay attention to the orientation of each piece as shown in the diagrams. Secure each connection point with the appropriate screws and Allen wrenches.
Video: This video provides a detailed assembly guide for the monitor arm, demonstrating how to connect the different arm segments and the VESA plate.
4. Kiinnitä VESA-levy näyttöön
Mount the VESA plate to the back of your monitor using the provided screws. Ensure your monitor is compatible with 75x75mm or 100x100mm VESA patterns. Do not overtighten the screws.
Image: A monitor is shown from the back, securely attached to the VESA plate of the monitor arm, highlighting the VESA mounting points.
5. Kiinnitä näyttö varteen
Carefully slide the VESA plate with the attached monitor onto the end of the monitor arm. Ensure it locks into place securely.
Käyttö ja säädöt
The AOC AM102 monitor arm offers extensive adjustability for optimal viewmukavuutta.
Image: Visual representation of the monitor arm's full motion capabilities: ±90° tilt, ±90° swivel, and ±180° rotation.
- Kallistaa: Adjust the monitor ±90° vertically to reduce glare and optimize viewkulma.
- Kääntyvä: Käännä näyttöä ±90° vaakasuunnassa jakaaksesi näyttösi tai vaihtaaksesi viewsuuntaa.
- Kierto: Pivot the monitor ±180° from landscape to portrait orientation.
- Korkeuden säätö: The gas spring arm allows for smooth vertical height adjustments. If the monitor rises or drops unexpectedly, adjust the tension screw on the arm (indicated by '+' and '-' symbols) using the provided Allen wrench until the monitor stays in the desired position.
Image: Step-by-step guide on how to adjust the tension screw on the monitor arm to ensure proper weight support and smooth movement.
Video: This video demonstrates the full range of motion and adjustability of the monitor arm, including height, tilt, swivel, and rotation, after installation.
Kaapelin hallinta
Keep your workspace tidy and organized with the integrated cable management system.
Image: The monitor arm features channels to route and conceal cables, contributing to a clutter-free desk.
- Route your monitor and power cables through the designated channels along the arm to keep them out of sight and prevent tangles.
Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Merkki | AOC |
| Mallinumero | AM102 |
| Yhteensopiva näytön koko | 17-32 tuumaa |
| Painon tuki | 4.4–19.8 lbs (2-9 kg) |
| VESA-yhteensopivuus | 75x75mm, 100x100mm |
| Asennustyyppi | C-Clamp, Läpivientipohja |
| C-Clamp Pöydän paksuus | Jopa 3.14 tuumaa (80 mm) |
| Grommet Desk Thickness | Jopa 1.77 tuumaa (45 mm) |
| Liikkeen tyyppi | Pyöritä, käännä, kallista |
| Kallistuskulma | ±90 astetta |
| Kääntökulma | ±90 astetta |
| Pyörimiskulma | ±180 astetta |
| Materiaali | Alumiini |
| Tuotteen paino | 5.68 kiloa |
| Tuotteen mitat | 8.85 x 4.56 x 6.5 tuumaa |
Takuu ja tuki
Every purchase of an AOC monitor stand includes reliable customer support, a 12-month warranty, and 24/7 technical assistance. If you have any questions about your single monitor mount or need setup guidance, simply reach out via Amazon messages, and our support team will respond within 24 hours.