1. Johdanto
Thank you for choosing the T-SUN Portable LED Work Light. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new work light. Please read this manual thoroughly before use and retain it for future reference.
2. Tuote ohiview
The T-SUN Portable LED Work Light is designed to provide bright, versatile illumination for various tasks and environments. It features high-efficiency LED beads, adjustable brightness levels, and compatibility with Dewalt 20V batteries. Additionally, it includes integrated USB and Type-C charging ports for powering external devices.
- Suuri kirkkaus: Up to 5200 Lumens for extensive area coverage.
- Kaksoiskirkkaustilat: High (5200 LM, 6-8 hours runtime) and Low (1800 LM, 18-20 hours runtime) for energy conservation.
- Laaja sädekulma: 120-140° for broad illumination.
- Akun yhteensopivuus: Designed for use with Dewalt 20V batteries (e.g., DCB201, DCB203, DCB204, DCB205, DCB206). Note: Battery not included.
- Kaksi latausporttia: 5V/2.1A USB-A and Type-C outputs for charging phones, tablets, and other electronic devices.
- Kestävä rakenne: Robust aluminum housing for effective heat dissipation and longevity.
- Säädettävä pää: The light head can be adjusted to direct illumination precisely where needed.
3. Turvallisuusohjeet
To ensure safe operation, please observe the following:
- Always ensure the work light is detached from the battery when not in use to prevent power drain.
- Älä katso suoraan LED-valoon sen ollessa päällä, sillä se voi vahingoittaa silmiä.
- Pidä laite poissa vedestä ja kosteudesta sähköiskun tai vaurioiden välttämiseksi.
- Do not attempt to disassemble or modify the work light. Repairs should only be performed by qualified personnel.
- Use only compatible Dewalt 20V batteries. Using incompatible batteries may damage the device or cause injury.
- Pidä poissa lasten ulottuvilta.
- Ensure proper ventilation when operating for extended periods to prevent overheating.
4. Pakkauksen sisältö
Varmista, että pakkauksessasi on kaikki tarvittavat osat:
- 2 x T-SUN Portable LED Work Lights
- 1 x Käyttöohje (tämä asiakirja)
5. Asennus
5.1 Akun kiinnitys
- Ensure the work light is switched off.
- Align the grooves on your Dewalt 20V battery with the corresponding slots on the base of the T-SUN work light.
- Liu'uta akku tukevasti paikalleen, kunnes se napsahtaa, mikä osoittaa turvallisen kytkennän.
5.2 Detaching the Battery
- Ensure the work light is switched off.
- Press the battery release button (usually located on the battery itself).
- Slide the battery out of the work light base.
6. Käyttöohjeet
6.1 Powering On/Off and Adjusting Brightness
- With a compatible Dewalt 20V battery attached, locate the toggle switch on the back of the work light base.
- Slide the switch to position 'I' for Low Brightness (1800 Lumens).
- Slide the switch to position 'II' for High Brightness (5200 Lumens).
- To turn off the light, slide the switch to the center 'O' position.
6.2 Valopään säätäminen
The LED panel is mounted on an adjustable bracket. Gently pivot the light head forward or backward to direct the beam to your desired area. The head offers a flexible angle of up to 140 degrees.
7. Ulkoisten laitteiden lataaminen
The T-SUN LED Work Light features a dual charging port for convenience:
- USB-A-lähtö: 5V/2.1A
- Type-C lähtö: 5V/2.1A
To charge an external device:
- Ensure a charged Dewalt 20V battery is securely attached to the work light.
- Locate the USB-A and Type-C ports on the side of the battery adapter.
- Liitä laitteen latauskaapeli sopivaan porttiin.
- The red indicator light next to the ports will illuminate when power is being supplied.
8. Huolto
- Puhdistus: Pyyhi työvalon ulkopinta pehmeällä, d:lläamp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
- Varastointi: Store the work light in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery before long-term storage.
- Tarkastus: Periodically check for any signs of damage to the housing, LED panel, or battery contacts. Do not use if damaged.
9. Vianmääritys
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Valo ei syty. | Battery not properly connected or discharged. | Ensure battery is securely attached. Charge or replace the battery. |
| Valoteho on himmeä. | Low brightness mode selected or battery is low. | Switch to high brightness mode. Charge or replace the battery. |
| Ulkoiset laitteet eivät lataudu. | Battery discharged or cable/device incompatibility. | Ensure battery is charged. Check cable and device compatibility. |
| Valo välkkyy. | Loose battery connection or low battery charge. | Re-seat the battery. Charge or replace the battery. |
10. Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Mallinumero | TS-F0120-60-DW |
| Valoteho (maksimi) | 5200 lumenia |
| Wattage | 52 wattia |
| Värilämpötila | 6000 Kelvin (kylmä valkoinen) |
| Säteen kulma | 120-140 astetta |
| Virtalähde | Battery Powered (Compatible with Dewalt 20V batteries) |
| USB-lähtö | 5V/2.1A (USB-A & Type-C) |
| Materiaali | Acrylonitrile Butadiene Styrene (ABS), Aluminum, Glass, Plastic, Polycarbonate (PC) |
| Mitat (P x L x K) | 4.13 cm x 3.86 cm x 5.8 cm |
| Paino | Varies with battery attached |
11. Takuu ja tuki
The T-SUN Portable LED Work Light comes with a 2 vuoden valmistajan takuuTämä takuu kattaa materiaali- ja valmistusvirheet normaalissa käytössä. Se ei kata vahinkoja, jotka johtuvat väärinkäytöstä, onnettomuuksista, luvattomista muutoksista tai normaalista kulumisesta.
For warranty claims or technical support, please contact T-SUN customer service through the retailer where the product was purchased or visit the official T-SUN websivustolta yhteystiedot.