GRAEF CC82 Sähköveitsen teroitin Käyttöohje

Johdanto

Thank you for choosing the GRAEF CC82 Electric Knife Sharpener. This manual provides essential information for the safe and effective operation, maintenance, and care of your device. Please read these instructions thoroughly before first use and retain them for future reference.

The GRAEF CC82 is designed to sharpen kitchen, hunting, and outdoor knives with a precise 20-degree grinding angle, utilizing CrissCross and Dizor Technology for optimal results.

Turvallisuusohjeet

• Always ensure the sharpener is placed on a stable, flat surface.
• Pidä kädet ja sormet poissa teroitusaukoista käytön aikana.
• Älä upota teroitin veteen tai mihinkään muuhun nesteeseen.
• Irrota laite pistorasiasta ennen puhdistusta tai kun sitä ei käytetä.
• Tätä laitetta ei ole tarkoitettu henkilöiden käyttöön, joilla on heikentyneet fyysiset, aistilliset tai henkiset kyvyt tai joilta puuttuu kokemusta ja tietoa, ellei heidän turvallisuudestaan ​​vastaava henkilö ole valvonut tai antanut heille ohjeita laitteen käytöstä.
• Lapsia tulee valvoa sen varmistamiseksi, etteivät he leiki laitteella.
• Do not attempt to sharpen ceramic knives or scissors with this device.

Tuote loppuview

The GRAEF CC82 features two distinct sharpening stages to achieve a consistently sharp edge.

Asennus

1. Unpack the GRAEF CC82 sharpener and remove all packaging materials.
2. Place the sharpener on a clean, dry, and stable surface.
3. Varmista, että virtakytkin on "OFF"-asennossa.
4. Liitä virtajohto sopivaan pistorasiaan.

Käyttöohjeet

The GRAEF CC82 features two sharpening stages:

• Stage 1: Coarse Sharpening (CrissCross Technology)

  Tämä stage uses diamond-coated sharpening wheels to create the initial 20-degree edge. It is suitable for dull or damaged blades and for establishing the primary bevel.

  1. Turn on the sharpener using the power switch.
  2. Hold the knife with the blade facing downwards and insert it into slot 1. Ensure the blade is centered and rests against the guide.
  3. Pull the knife slowly and steadily through the slot, applying light downward pressure. Repeat this process 3-5 times for each side of the blade, alternating between the left and right guides within slot 1.
  4. Listen for a consistent grinding sound. Avoid excessive pressure, which can damage the blade or the sharpener.

  

• Stage 2: Fine Honing and Polishing (Dizor Technology)

  Tämä stage refines the edge created in Stage 1, removing burrs and polishing the blade for an ultra-sharp finish. This stage is manual and does not involve rotating wheels.

  1. After completing Stage 1, insert the knife into slot 2.
  2. Pull the knife slowly and steadily through the slot, applying very light pressure. Repeat this process 5-10 times for each side of the blade, alternating between the left and right guides within slot 2.
  3. Tämä stage is crucial for achieving the final razor-sharp edge and is also suitable for maintaining already sharp knives.
  4. For serrated blades, only use Stage 2. Gently pull the serrated edge through slot 2 a few times to refine the tips of the serrations. Do not use Stage 1 for serrated blades.

  

After sharpening, carefully wipe the blade with a damp cloth to remove any metal dust before use.

Huolto ja puhdistus

• Irrota teroitin aina pistorasiasta ennen puhdistamista.
• Pyyhi teroittimen ulkopinta pehmeällä,amp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• The sharpening slots may accumulate metal dust. To clean, gently tap the sharpener upside down over a waste bin to dislodge particles. Do not use water or compressed air directly into the slots.
• Säilytä teroitin kuivassa paikassa, kun sitä ei käytetä.

Vianetsintä

• Teroitin ei käynnisty:

  Ensure the power cord is securely plugged into both the sharpener and a working electrical outlet. Check the power switch is in the "ON" position.

• Knives are not getting sharp:

  Ensure you are following the correct procedure for both Stage 1 ja Stage 2. Apply light, consistent pressure and pull the knife slowly. Very dull knives may require more passes through Stage 1. Ensure the knife is suitable for a 20-degree grinding angle.
• Excessive scratching on blade:

  This may indicate too much pressure is being applied, or the knife is not being pulled through smoothly. Reduce pressure and maintain a steady motion. Ensure the blade is clean before sharpening.

Tekniset tiedot

Ympäristönsuojelu ja hävittäminen

Do not dispose of this product with household waste. This appliance contains electrical and electronic components that must be recycled. Please contact your local authority for information regarding collection points for electrical and electronic waste.