Recaceik Dining Table Set with Faux Marble Top and Benches Instruction Manual

Tärkeitä turvallisuustietoja

Lue kaikki ohjeet huolellisesti ennen kokoamista ja käyttöä. Säilytä tämä käyttöohje myöhempää tarvetta varten.

• Varmista, että kaikki osat ovat mukana ja ehjät ennen kokoamisen aloittamista. Älä käytä laitetta, jos jokin osa puuttuu tai on rikki.
• Kokoa tuote pehmeälle ja puhtaalle alustalle naarmujen välttämiseksi.
• Tighten all fasteners securely, but do not overtighten. Periodically check and re-tighten fasteners as needed.
• Do not stand or sit on the table. The table is designed for dining and general surface use.
• Distribute weight evenly on the table and benches.
• Pidä pienet osat poissa lasten ulottuvilta asennuksen aikana.
• Avoid placing hot items directly on the faux marble tabletop without protection.

Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki alla luetellut osat. Jos jokin osa puuttuu tai on vaurioitunut, ota yhteyttä asiakastukeen.

• 1 x Dining Table (Faux Marble Top, Metal Frame)
• 2 x Dining Benches (PU Leather Upholstered, Metal Frame)
• 1 x Hardware Pack (Screws, Allen Wrench, etc.)
• 1 x Kokoamisohje

Kuva 1: Yliview of the Recaceik 3-piece dining table set, showing the faux marble top table and two upholstered benches.

Asennus- ja kokoamisohjeet

Assembly typically takes less than 30 minutes. It is recommended to have two people for easier assembly.

1. Pura komponentit: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent damage. Identify all table and bench components, including frames, tops, and hardware.
2. Kokoa pöydän runko: Attach the table legs to the table frame using the provided screws and Allen wrench. Ensure all connections are secure but do not fully tighten yet.
3. Kiinnitä pöytälevy: Carefully place the faux marble tabletop onto the assembled table frame. Align the pre-drilled holes on the tabletop with the holes on the frame. Secure the tabletop to the frame using the appropriate screws. Once the tabletop is attached, fully tighten all screws on the table frame and tabletop.
4. Kokoa penkkien rungot: For each bench, attach the bench legs to the bench frame using the provided screws and Allen wrench. Ensure all connections are secure but do not fully tighten yet.
5. Kiinnitä penkki-istuimet: Carefully place each upholstered bench seat onto its assembled bench frame. Align the pre-drilled holes on the bench seat with the holes on the frame. Secure the bench seat to the frame using the appropriate screws. Once the bench seats are attached, fully tighten all screws on the bench frames and seats.
6. Lopputarkastus: Gently lift and move the assembled table and benches to their desired location. Ensure all parts are stable and level. Adjust the leveling feet if necessary to prevent wobbling.

Kuva 2: Illustration of the table's dimensions and key construction elements, including the thickened metal frame and MDF material with marble decoration.

Käyttöohjeet

This dining set is designed for versatile use in various living spaces.

• Ruokailu: Use the table for meals, work, or other activities. The benches provide comfortable seating for up to four individuals.
• Tilaa säästävä: The benches are designed to tuck neatly under the table when not in use, maximizing floor space in smaller rooms or apartments.
• Sijoitus: Position the dining set on a flat, stable surface. Avoid placing it in direct sunlight or near heat sources to prevent material degradation.

Kuva 3: Demonstration of the space-saving design, showing benches both in use and neatly stored under the table.

Huolto ja hoito

Proper care will extend the life and maintain the appearance of your dining set.

• Keinomarmorinen pöytälevy:
  • Pyyhi roiskeet välittömästi pehmeällä, damp kangas.
  • Clean regularly with a mild, non-abrasive cleaner and a soft cloth.
  • Avoid harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.
  • Use coasters or placemats to protect the surface from hot dishes, scratches, and stains.
• PU Leather Benches:
  • Pyyhi puhtaaksi pehmeällä, damp kangas.
  • For tougher stains, use a mild soap solution and wipe dry immediately.
  • Avoid direct sunlight exposure to prevent fading and cracking.
  • Do not use abrasive cleaners, solvents, or furniture polish on PU leather.
• Metallikehys: Pyyhi pöly pehmeällä, kuivalla liinalla.
• Yleistä: Tarkista ja kiristä säännöllisesti kaikki ruuvit ja pultit vakauden varmistamiseksi.

Vianetsintä

Tekniset tiedot

Takuu ja tuki

Specific warranty details for this product are not provided in the available information. Please refer to your purchase documentation or contact the retailer for warranty information.

For any questions, missing parts, or assistance, please contact Recaceik customer support through the retailer where the product was purchased or visit the official Recaceik websivusto.