STRICH SW-2

STRICH SW-2 Guitar Wah & Volume Pedal Instruction Manual

Malli: SW-2

Johdanto

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your STRICH SW-2 Guitar Wah & Volume Pedal. The SW-2 is a versatile 2-in-1 effects pedal designed for electric guitars, offering both vintage wah tones and active volume control. Please read this manual thoroughly to ensure proper use and to maximize the pedal's capabilities.

Tuote loppuview

The STRICH SW-2 pedal integrates two essential guitar effects into a single, robust unit. It features a durable full-size design and comes with a dedicated power supply for immediate use.

Tärkeimmät ominaisuudet:

  • Complete Ready-to-Use Kit: Includes a genuine 9V 1A power adapter for stable power supply.
  • Kaksitilasuunnittelu: Yhdistää vintage wah pedal tones with active volume control.
  • 6-Channel Wah Frequency Control: Offers six selectable center frequencies for customizable wah effects.
  • Tonal Versatility: Adjust the Quality knob to fine-tune resonance and intensity.
  • Linear Volume Control: Provides smooth, precise volume swells for dynamic performance.
STRICH SW-2 pedal showing 3 modes: Wah, Volume, True Bypass
Kuva 1: Päättynytview of the 3-in-1 functionality (Wah, Volume, True Bypass).

Asennus

  1. Virtaliitäntä: Connect the included 9V 1A power adapter to the DC IN jack on the pedal and then to a standard electrical outlet.
  2. Laitteen liitäntä: Connect your electric guitar to the INPUT jack on the pedal using a standard 1/4-inch instrument cable.
  3. Ampnostimen liitäntä: Connect the OUTPUT jack on the pedal to your guitar amplifier's input using another standard 1/4-inch instrument cable.
  4. Sijoitus: Position the pedal on a stable surface or your pedalboard. Ensure the rubber feet provide adequate grip.
STRICH SW-2 pedal with power supply connected
Figure 2: The STRICH SW-2 pedal connected to its power supply.

Käyttöohjeet

The STRICH SW-2 offers both Wah and Volume modes, along with two bypass options. The pedal is activated by pressing down on the toe end of the treadle until you feel a click.

Tilan valinta:

  • Use the small toggle switch located on the side of the pedal to select between WAH, VOL, or BYPASS modes.
  • When the toggle switch is in the WAH position, the pedal functions as a wah effect.
  • When the toggle switch is in the VOL position, the pedal functions as a volume control.
  • When the toggle switch is in the BYPASS position, the pedal is in true bypass mode, allowing the signal to pass through unaffected.

Engaging/Disengaging Effects:

To engage or disengage the Wah or Volume effect, press the toe end of the pedal treadle firmly until you hear or feel a click. An indicator light will illuminate when the effect is active (Wah mode) or off (Volume mode, depending on the selector level position).

Diagram showing Wah/Vol mode with buffer bypass and Wah/Bypass mode with pure pass-through
Figure 3: Illustration of the two bypass modes: Wah/Vol (buffer bypass) and Wah/Bypass (pure pass-through).

Säätimet ja toiminnot

Familiarize yourself with the various controls on the STRICH SW-2 pedal to achieve your desired sound.

  • WAH./VOL./BYPASS Toggle Switch: This three-position switch selects the primary function of the pedal.
    • WAH: Activates the wah effect.
    • LENTO: Activates the volume control.
    • OHITTAA: Engages true bypass, removing the pedal from the signal chain.
  • MIN VOL Knob: (Active in Volume mode) This knob sets the minimum volume level when the pedal treadle is in the heel-down position. Adjusting this allows for dynamic volume swells from a silent cut-off to a set minimum level.
    Diagram showing adjustable initial volume with wide range (0% min vol) and narrow range (50% min vol)
    Figure 4: The MIN VOL knob allows adjustment of the minimum volume range.
  • QUALITY Knob: (Active in Wah mode) This control adjusts the resonance and intensity of the wah effect. Turning it clockwise increases the "Q" factor, making the wah sound sharper and more pronounced.
    Diagram showing Quality knob adjustment for soft, warm, and sharp wah textures
    Figure 5: The QUALITY knob fine-tunes the wah sound texture.
  • RANGE Knob: (Active in Wah mode) This knob selects one of six different center frequency ranges for the wah effect. Each setting provides a distinct tonal character, from deep "wa" to sharp "wu" sounds.
    Diagram showing 6 adjustable center frequencies for the wah effect
    Figure 6: The RANGE knob offers six adjustable center frequencies for the wah effect.
  • Treadle (Pedal): The main foot-operated part of the pedal.
    • Wah-tila: Moving the treadle from heel-down to toe-down sweeps the wah filter across the selected frequency range.
    • Äänenvoimakkuustila: Moving the treadle from heel-down to toe-down increases the volume from the minimum set by the MIN VOL knob to maximum.
  • Footswitch (under treadle): Engages or disengages the selected effect (Wah or Volume). Press firmly on the toe end of the treadle to activate.

Huolto

  • Puhdistus: Puhdista polkimen ulkopinta pehmeällä, kuivalla liinalla. Vältä hankaavia puhdistusaineita tai liuottimia, jotka voivat vahingoittaa pintaa.
  • Varastointi: Store the pedal in a dry environment, away from extreme temperatures and direct sunlight. Disconnect power when not in use for extended periods.
  • Kaapeliliitännät: Periodically check all cable connections for wear and tear. Ensure cables are securely plugged in during operation.
  • Virtalähde: Always use the provided 9V 1A power adapter or a compatible, regulated 9V DC power supply with a center-negative polarity. Using an incorrect power supply can damage the unit and void the warranty.

Vianetsintä

OngelmaMahdollinen syyRatkaisu
Ei ääntä, kun poljinta painetaan.
  • Virheelliset kaapeliliitännät.
  • Virtalähdettä ei ole kytketty tai se on viallinen.
  • Pedal not engaged (footswitch not pressed).
  • Volume knob (on guitar/amp) turned down.
  • Verify all 1/4-inch cables are securely connected to INPUT/OUTPUT.
  • Ensure power adapter is connected and receiving power.
  • Press the footswitch firmly to engage the effect.
  • Check volume levels on your guitar and ampelävämpi.
Wah effect is not noticeable or sounds incorrect.
  • Toggle switch not in WAH position.
  • QUALITY or RANGE knobs set too low or inappropriately.
  • Set the toggle switch to WAH.
  • Adjust the QUALITY and RANGE knobs to experiment with different wah characteristics.
Volume control is not working as expected.
  • Toggle switch not in VOL position.
  • MIN VOL knob setting.
  • Set the toggle switch to VOL.
  • Adjust the MIN VOL knob to set the desired minimum volume level.
Ei-toivottua kohinaa tai huminaa.
  • Maasilmukan ongelmat
  • Vialliset kaapelit.
  • Muiden elektronisten laitteiden aiheuttamat häiriöt.
  • Potential characteristic of the volume circuit at zero volume (as noted in some user feedback).
  • Varmista, että kaikki laitteet on maadoitettu asianmukaisesti. Kokeile eri pistorasioita.
  • Test with different instrument cables.
  • Move the pedal away from power transformers or other noisy electronics.
  • If a slight hum/hiss is present at zero volume in volume mode, adjusting the MIN VOL knob to a slightly higher setting may mitigate this if a complete silence is not required.

Tekniset tiedot

OminaisuusYksityiskohta
MallinumeroSW-2
MerkkiKORKEA
Tuotteen mitat28.5 x 10.5 x 6.5 cm
Tuotteen paino0.75 kiloa
ÄänilähtötehosteetVolume, Wah
Ohjainten tyyppiPedal, Knobs, Toggle Switch
VirtalähdeCorded Electric (9V 1A DC, center-negative)
Laitteistorajapinta6,3 mm:n äänitulo/-lähtö
Signaalin muotoAnaloginen
Mukana olevat komponentit1 x SW-2 Wah Volume Pedal, 1 x Power Supply Adapter, 1 x STRICH Sticker
AlkuperämaaKiina
Image showing product dimensions of the STRICH SW-2 pedal
Figure 7: Product dimensions of the STRICH SW-2 Guitar Wah & Volume Pedal.

Takuu ja tuki

The STRICH SW-2 Guitar Wah & Volume Pedal comes with a yhden vuoden takuu ostopäivästä lukien. Tämä takuu kattaa valmistusvirheet ja varmistaa, että tuote toimii tarkoitetulla tavalla normaalissa käytössä.

For technical support, warranty claims, or any questions regarding your pedal, please contact STRICH customer service through the retailer where the product was purchased or refer to the manufacturer's contact information provided with your product packaging.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.