Philipsin aurinkokennoturvavalon käyttöohje

Johdanto

Thank you for choosing the Philips Solar Security Light. This manual provides essential information for the safe and efficient operation of your solar-powered, wall-mounted flood light with PIR motion sensor. Please read these instructions carefully before installation and use, and retain them for future reference.

Turvallisuustiedot

• Varmista, että kiinnityspinta on vakaa ja kestää valaisimen painon.
• Älä yritä purkaa tai muokata tuotetta. Tämä voi mitätöidä takuun ja aiheuttaa turvallisuusriskejä.
• Pidä aurinkopaneeli puhtaana optimaalisen lataustehon varmistamiseksi.
• Avoid looking directly into the light source when it is active, as it may cause eye strain.
• Hävitä tuote ja sen osat vastuullisesti paikallisten määräysten mukaisesti tuotteen käyttöiän päätyttyä.

Pakkauksen sisältö

Varmista ennen asennusta, että kaikki osat ovat mukana:

• Philips Solar Security Light (1 unit)
• Kaukosäädin (1 kpl)
• Asennusteline (1 yksikkö)
• Ruuvit (2 kpl)
• Wall Plugs (2 units)

Tuote loppuview

The Philips Solar Security Light is an outdoor, solar-powered flood light designed for enhanced security and illumination. It features a PIR motion sensor, high-brightness LEDs, and multiple lighting modes.

Kuva: Yliview of the Philips Solar Security Light, highlighting its durable design with a solar panel, three LED light heads, and an integrated motion sensor.

Tärkeimmät ominaisuudet:

• Suuri kirkkaus: 800 lumens with 6500K cool daylight color temperature.
• PIR-liiketunnistin: Detects motion up to 49.2 feet with a 180-degree detection angle.
• 3 valaistustilaa: Customizable illumination settings for various needs.
• Aurinkovoimalla toimiva: Equipped with an upgraded polycrystalline solar panel and a 2000 mAh high-capacity battery for efficient charging and extended use.
• Säänkestävä: IP65 rated for resistance against heavy rain, humidity, and extreme temperatures.
• Kaukosäädin: Allows convenient adjustment of light modes without manual interaction.

Asennus ja asennus

The Philips Solar Security Light is designed for easy wall-mounted installation with no wiring required. It comes pre-assembled.

Asennusvaiheet:

1. Valitse sijainti: Select an outdoor location that receives direct sunlight for most of the day to ensure optimal charging of the solar panel. The light should be mounted on a wall.
2. Merkitse porauspisteet: Hold the mounting bracket against the desired wall location and mark the positions for the two screws.
3. Poraa reikiä: Drill two holes at the marked points. Insert the wall plugs into the drilled holes.
4. Kiinnitä asennusteline: Kiinnitä kiinnitysteline seinään mukana toimitetuilla ruuveilla.
5. Asenna valo: Slide the solar security light onto the mounting bracket until it clicks securely into place.
6. Valopäiden ja anturin säätö: Adjust the three light heads and the PIR motion sensor to cover the desired area. The motion sensor has an adjustable angle of 180 degrees.

Image: Visual guide for installing the Philips Solar Security Light, including dimensions and the accessories provided for wall mounting.

Image: Illustration of the motion sensor's coverage, showing a 180-degree detection angle and a maximum sensing range of 49.2 feet.

Käyttöohjeet

The Philips Solar Security Light features three distinct lighting modes, controllable via the included remote control.

Valaistustilat:

1. Anturin tila: The light remains off until motion is detected. Upon detection, it illuminates at 100% brightness (800 lumens) for approximately 25 seconds, then turns off.
2. Himmeä tila: The light stays on continuously at a low brightness of 10% (80 lumens) throughout the night.
3. Himmennys + anturitila: The light stays on continuously at a very low brightness of 2-3% (16-24 lumens). When motion is detected, it brightens to 100% (800 lumens) for approximately 25 seconds, then returns to the dim state.

Image: Detailed explanation of the three operational modes, showing how the light behaves in Sensor, Dim, and Dim + Sensor modes based on motion detection and ambient light.

Use the remote control to switch between these modes as needed. Ensure the remote control has a clear line of sight to the light fixture for proper function.

Huolto

Regular maintenance ensures optimal performance and longevity of your Philips Solar Security Light.

• Aurinkopaneelien puhdistus: Pyyhi aurinkopaneeli säännöllisesti pehmeällä,amp liinalla pölyn, lian tai roskien poistamiseksi. Puhdas aurinkopaneeli varmistaa auringonvalon maksimaalisen imeytymisen ja lataustehon.
• Valaisimen puhdistus: Clean the light fixture with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
• Akku: The integrated high-capacity 2000 mAh battery is designed for long-term use. No user maintenance or replacement is required for the battery.
• Säänkestävyys: The IP65 rating ensures the light is protected against dust and water jets. However, avoid submerging the unit in water.

Image: Focus on the high-quality solar panel, illustrating its role in providing power for 8-10 hours of operation and its 1800mAh high-capacity battery.

Vianetsintä

Jos Philipsin aurinkokennolla toimivan turvavalon kanssa ilmenee ongelmia, katso seuraavat yleiset ongelmat ja ratkaisut:

• Valo ei syty yöllä:
  • Ensure the solar panel is receiving adequate direct sunlight during the day.
  • Check if the light is in the correct operating mode (e.g., not in 'off' state if the remote has an off button).
  • Verify that the remote control battery is functional.
• Valo on himmeä tai palaa vain lyhyen aikaa:
  • The solar panel may not be fully charged. Ensure it is clean and exposed to direct sunlight for at least 6-8 hours.
  • Ambient temperature can affect battery performance; extreme cold may reduce operating time.
• Motion sensor is not detecting movement:
  • Varmista, että anturin linssi on puhdas ja esteetön.
  • Verify the light is in a motion-activated mode (Sensor Mode or Dim + Sensor Mode).
  • Adjust the angle of the motion sensor to cover the desired detection area.

If problems persist, please contact Philips customer support for further assistance.

Tekniset tiedot

Image: A comparison table highlighting key specifications of the Philips solar security light, such as brightness, lighting modes, battery capacity, and waterproof rating.

Takuu ja tuki

Takuutietoja ja asiakastukea varten katso Philipsin virallinen websivustolta tai ota yhteyttä heidän asiakaspalveluunsa. Säilytä ostokuitti ostotodistuksena.

Lisätietoja saat osoitteesta: www.philips.com/support