ROROLL WS-6916 Digital Satellite Finder Meter User Manual

1. Johdanto

This user manual provides comprehensive instructions for the ROROLL WS-6916 Digital Satellite Finder Meter. It is designed to assist users in setting up, operating, and maintaining the device for optimal performance in satellite dish alignment. Please read this manual thoroughly before using the product.

2. Tuote ohiview

The ROROLL WS-6916 is a portable digital satellite finder meter equipped with a 3.5-inch high-definition TFT LCD screen. It supports MPEG-2/H.265(8 bit) hardware decoding and offers various functions for efficient satellite signal acquisition and analysis.

2.1 Tärkeimmät ominaisuudet

• 3.5-inch high definition TFT LCD screen.
• MPEG-2/H.265(8 bit) hardware decoding.
• Signal strength, BER, MER, S/N, and power measurement.
• Signal lock indication with panel LED and sound.
• Supports DiSEqC 1.0/1.1, 1.2/USALS, and 22kHz tone.
• Auto, blind, manual, and NIT scan modes.
• Ohjelmistopäivitys ja file siirto USB:n kautta.
• LNB short protection.
• Built-in 7.4V/3000mAh Li-ion battery for approximately 4 hours of operation.
• Integrated speaker.
• Supports both AV out and AV in.
• Automatic angle calculation for Azimuth (AZ) and Elevation (EL).

2.2 Laitteen asettelu

Familiarize yourself with the device's buttons and ports.

Kuva 1: Edessä view of the WS-6916 Satellite Finder Meter. This image displays the 3.5-inch LCD screen with a menu interface, along with the numerical keypad, navigation buttons (MENU, EXIT, OK, arrow keys), and function buttons (F1, F2, F3, SCAN, AV-S, TTXT, SUBT, TV/R, AUDIO, INFO, MUTE).

Kuva 2: Taka ja sivu view of the WS-6916. This image highlights the LNB input, AV input/output ports, USB port, 12V DC power input, power switch, and integrated speaker.

3. Asennus

3.1 Ensimmäinen lataus

Before first use, fully charge the device's built-in Li-ion battery. Connect the provided power adapter to the DC 12V/1.5A input port on the device and plug it into a power outlet. The 'CHARGE' indicator LED will illuminate during charging.

Kuva 3: Illustration of the 7.4V 3000mAh Li-ion rechargeable battery and the DC power input port for charging.

3.2 Satelliittiantenniin kytkeminen

1. Ensure the satellite finder is powered off.
2. Connect the LNB cable from your satellite dish to the "SATELLITE INPUT" F-type connector on the device.
3. If connecting to a receiver, connect the receiver's LNB output to the "LOOP OUT" port (if available and required by your setup).
4. Käynnistä laite virtakytkimellä.

4. Käyttöohjeet

4.1 Valikon käyttö

Käytä MENU -painiketta päästäksesi päävalikkoon. Käytä nuolinäppäimiä (UP, ALAS, VASEN, OIKEIN) navigoidaksesi vaihtoehtojen läpi ja OK -painiketta valintojen vahvistamiseksi. EXIT button returns to the previous screen or exits the menu.

4.2 Satelliittietsintä

1. From the main menu, select "Satellite Find".
2. Choose the desired satellite from the list. If the satellite is not listed, you may need to add it or perform a blind scan.
3. Adjust the satellite dish's azimuth and elevation angles while observing the signal strength and quality indicators on the screen. The device provides real-time feedback on signal strength (dBm), Bit Error Rate (BER), Modulation Error Ratio (MER), and Signal-to-Noise ratio (S/N).
4. When a strong signal is detected, the "LOCK" LED on the panel will illuminate, and an audible tone will sound. Fine-tune the dish for maximum signal quality.

Kuva 4: The WS-6916 in use, displaying signal parameters such as strength, BER, MER, and S/N, which are crucial for accurate satellite dish alignment.

4.3 DiSEqC Settings

The device supports DiSEqC 1.0/1.1, 1.2/USALS. Access these settings through the "Satellite Installation" or "System Setting" menu to configure for multiple LNBs or motorized dishes.

4.4 AV Input/Output

The WS-6916 features both AV input and output capabilities. Use the provided AV cable to connect external devices. The AV output can display the meter's screen on a larger monitor, while the AV input allows viewing external video sources on the meter's screen.

Kuva 5: Connection diagram illustrating the AV IN and AV OUT ports, and how to connect them to external video and audio devices.

4.5 Ohjelmistopäivitys ja File Siirtää

Connect the device to a computer via the USB port for software upgrades or to transfer multimedia files (WMA, MP3, MP4, AVI, JPG, JPEG, BMP, IMG) to and from the device. Ensure the correct firmware file is used for upgrades to prevent damage.

5. Huolto

5.1 Akun hoito

• Akun käyttöiän pidentämiseksi vältä akun usein tapahtuvaa täydellistä tyhjentymistä.
• Lataa laite säännöllisesti, vaikka sitä ei käytettäisi pitkään aikaan (esim. kerran kolmessa kuukaudessa).
• Säilytä laitetta viileässä, kuivassa paikassa suojassa suoralta auringonvalolta.

5.2 Puhdistus

Pyyhi laite pehmeällä, kuivalla liinalla. Älä käytä nestemäisiä puhdistusaineita tai hankaavia aineita, sillä ne voivat vahingoittaa näyttöä taiasing.

5.3 Varastointi

When not in use, store the satellite finder in its protective pouch in a dry environment to prevent dust and moisture damage.

6. Vianmääritys

• Ei signaalia havaittu:
  • Check all cable connections between the LNB and the meter.
  • Ensure the LNB is powered (check LNB supply voltage in settings).
  • Verify correct satellite parameters (frequency, symbol rate, polarization) are selected.
  • Confirm the satellite dish is aimed correctly.
• Laite ei käynnisty:
  • Ensure the battery is charged. Connect to the power adapter.
  • Tarkista virtakytkimen asento.
• LNB:n oikosulkusuojaus aktivoitu:
  • Disconnect the LNB cable immediately.
  • Inspect the LNB cable and connector for any damage or short circuits.
  • Replace faulty cables or LNBs as necessary.
• Näytön näyttöongelmat:
  • Varmista, että laite on ladattu riittävästi.
  • Jos näyttö on jumiutunut, yritä käynnistää laite uudelleen.

7. Tekniset tiedot

Detailed technical specifications for the ROROLL WS-6916 Digital Satellite Finder Meter.

Kuva 6: Dimensional drawing of the WS-6916, showing its length, width, and thickness.

8. Takuu ja tuki

For warranty information and technical support, please refer to the documentation included with your purchase or contact ROROLL customer service. Keep your purchase receipt as proof of purchase.

Valmistaja: ROROLL

Mallinumero: 1005004448071483

Päivämäärä, kun ensimmäinen saatavilla: 16. huhtikuuta 2025