ROROLL WS-6933 Satellite Finder User Manual

Johdanto

The ROROLL WS-6933 is a compact and efficient DVB-S2 digital satellite finder meter designed to assist users in accurately adjusting satellite dishes. This device provides real-time measurements of signal strength and quality, ensuring optimal satellite reception. Its user-friendly interface and portable design make it an essential tool for both professional installers and DIY enthusiasts.

This manual provides detailed instructions on how to set up, operate, and maintain your WS-6933 satellite finder, along with troubleshooting tips and product specifications.

Asennus

1. Purkaminen pakkauksesta ja alkulataus

Carefully remove all components from the packaging. Before first use, ensure the device is fully charged. Connect the provided 12V/1.2A DC adapter to the charging port on the device and plug it into a power outlet. The charging indicator will illuminate. A full charge typically takes approximately 3 hours, providing up to 3 hours of operating time.

Figure 1: Included accessories for the WS-6933, showing the USB cable, power adapter, and other components.

2. Laite loppuview ja Yhteydet

Familiarize yourself with the device's layout. The WS-6933 features a 2.1-inch LCD screen, control buttons, and various ports for connectivity.

Kuva 2: Etuosa view of the WS-6933, displaying the LCD screen, navigation buttons, and signal quality meter.

Kuva 3: Yläosa view of the WS-6933, highlighting the LNB input connector and the power switch.

• LNB-tulo: Connect your LNB cable from the satellite dish to this port.
• Virtakytkin: Kytkee laitteen päälle/pois.
• USB-portti: Used for software upgrades.

Käyttöohjeet

1. Powering On and Main Menu

Flip the power switch to the ON position. The device will boot up and display the main menu on the LCD screen. Use the navigation buttons (UP, DOWN, LEFT, RIGHT) and the OK button to navigate through the menu options.

Figure 4: The WS-6933 main menu, providing access to various functions.

2. Satellite Dish Adjustment

The primary function of the WS-6933 is to help you find and optimize satellite signals. Follow these steps:

1. Valitse satelliitti: From the main menu, navigate to 'Sat Setting' or 'Signal Scan'. Select the desired satellite from the pre-programmed list or add a new one.
2. Liitä LNB:hen: Ensure your LNB cable is securely connected to the device's LNB input. The device will provide power to the LNB (13V/18V, IMax 300mA).
3. Adjust Dish: Slowly adjust the azimuth and elevation of your satellite dish. Observe the signal strength and quality readings on the LCD screen. The device provides a digital meter for both signal strength and quality (BER, PWR).
4. Locking Signal: When a strong signal is detected, the device will emit a sound alarm and/or light alarm, indicating a locked signal. Fine-tune the dish for the highest possible signal quality.
5. DISEQC and 22KHz Tone: The WS-6933 supports DISEQC 1.0/1.1 and 22KHz Tone. Configure these settings in the 'Sat Setting' menu if your setup requires them.
6. Mechanical Compass: Utilize the integrated mechanical compass for initial dish alignment, especially for determining the correct azimuth.

3. Lisäominaisuudet

• LNB:n oikosulkusuoja: The device features LNB short circuit protection to prevent damage.
• Beep Integrated: Audible feedback for signal locking and navigation.
• Laske AZ, EL kulma automaattisesti: The device can assist in calculating the approximate azimuth and elevation angles for your location.

Huolto

1. Ohjelmistopäivitykset

The WS-6933 supports software upgrades via its USB port. Periodically check the ROROLL official website for the latest firmware versions. To upgrade:

1. Lataa uusin laiteohjelmisto file tietokoneellesi.
2. Connect the WS-6933 to your computer using the provided USB cable.
3. Follow the instructions provided with the firmware update package to complete the upgrade.

2. Puhdistus ja varastointi

• Puhdista laite pehmeällä, kuivalla liinalla. Älä käytä nestemäisiä puhdistusaineita tai liuottimia.
• Säilytä laitetta viileässä, kuivassa paikassa, poissa suorasta auringonvalosta ja äärimmäisistä lämpötiloista.
• If storing for extended periods, ensure the battery is partially charged (around 50%) to prolong its lifespan. Recharge every few months.

Vianetsintä

Tekniset tiedot

Takuu ja tuki

For information regarding product warranty, returns, or technical support, please refer to the documentation included with your purchase or visit the official ROROLL websivusto. Säilytä ostokuitti ostotodistuksena mahdollisten takuuvaatimusten varalta.

If you encounter issues not covered in this manual, please contact ROROLL customer service for assistance.