1. Johdanto
Thank you for choosing the AQQA Aquarium LED Light. This high-quality lighting system is designed to provide optimal illumination for your aquatic environment, supporting the healthy growth of fish and plants. It features advanced LED technology, a convenient timer, and multiple lighting modes to create a vibrant and thriving aquarium.
2. Turvallisuusohjeet
- Irrota aina valaisin pistorasiasta ennen huoltoa, puhdistusta tai asennusta.
- Do not immerse the power adapter or controller in water. The light unit itself is IP67 waterproof, but the power components are not.
- Varmista, että valo on kiinnitetty tukevasti akvaarioon, jotta se ei putoa vahingossa.
- Älä käytä valaisinta, jos virtajohto tai pistoke on vaurioitunut.
- Pidä poissa lasten ulottuvilta.
- Tämä tuote on tarkoitettu vain sisäkäyttöön.
3. Pakkauksen sisältö
Tarkista, että kaikki osat ovat mukana ja hyvässä kunnossa:
- AQQA Aquarium LED Light Unit
- Extendable Mounting Brackets (2 pcs)
- Inline Controller with Power Cord
- Japanilainen käyttöohje
4. Tuotteen ominaisuudet
- Korkealaatuiset LED-sirut: Features 5 rows of high-brightness LED chips, providing approximately 10% more chips than comparable lights for brighter, more uniform illumination. Full-spectrum design (white + RGB) supports healthy fish and aquatic plant growth.
- Timer Function & Memory: Built-in timer with 5, 10, or 12-hour settings for automatic daily on/off cycles. A memory function restores previous settings after a power outage.
- 3 Lighting Modes & 10-Level Brightness: Offers Full Spectrum, White Light, and Color Light modes. Each mode has 10 adjustable brightness levels (3% to 100%) for precise environmental control.
- Extendable Stand & IP67 Waterproof: Adjustable stand design fits various aquarium widths. IP67 waterproof rating protects against water vapor and allows for temporary submersion (retrieve and dry within 30 minutes if submerged).
- Lightweight & Eye-Friendly: Lightweight design minimizes stress on aquarium edges. Flicker-free illumination is gentle on the eyes during observation.
5. Asennusohjeet
- Kiinnitä asennuskannattimet: Slide the extendable mounting brackets into the slots on both ends of the LED light unit. Adjust the brackets to match the width of your aquarium.
- Aseta valo: Carefully place the light unit with attached brackets onto the edges of your aquarium. Ensure it is stable and centered over the tank.
- Liitä virta: Plug the inline controller's power cord into a suitable power outlet.
6. Käyttöohjeet
The AQQA Aquarium LED Light is controlled via an inline remote. Familiarize yourself with the buttons:
- AJASTIN: Sets the operating duration (5H, 10H, 12H).
- RGB +/-: Adjusts the brightness of the RGB (color) LEDs.
- ON/OFF / M: Powers the light on/off and cycles through lighting modes.
- W +/-: Adjusts the brightness of the white LEDs.
6.1 Virta päälle/pois ja tilan valinta
- Paina ON/OFF / M button once to turn the light on.
- Paina ON/OFF / M button repeatedly to cycle through the three lighting modes: Full Spectrum, Color Light, and White Light.
- Paina ja pidä painettuna ON/OFF / M button for 3 seconds to turn the light off.
6.2 Kirkkauden säätö
Each lighting mode offers 10 levels of brightness adjustment:
- To adjust the brightness of the white LEDs, use the W + (lisää) ja W - (decrease) buttons.
- To adjust the brightness of the RGB (color) LEDs, use the RGB + (lisää) ja RGB - (decrease) buttons.
6.3 Ajastintoiminto
The timer function allows for automatic daily operation:
- Paina AJASTIN button to select the desired operating duration: 5 hours, 10 hours, or 12 hours.
- Once a timer is set, the light will automatically turn off after the selected duration and will turn on again at the same time the next day, repeating the cycle.
- The light retains its last brightness and color settings even after a power outage, muistitoimintojensa ansiosta.
6.4 Käyttövideo-opas
Watch this video for a visual guide on setting up and operating your AQQA Aquarium LED Light:
7. Huolto
- Valon puhdistaminen: Regularly wipe the light unit with a soft, damp cloth to remove dust and water spots. Ensure the light is unplugged before cleaning. Do not use abrasive cleaners.
- Liitäntöjen tarkistus: Periodically inspect the power cord and connections for any signs of damage or wear.
- Veteen upottaminen: If the light unit accidentally falls into the water, retrieve it immediately and dry it thoroughly before reconnecting power. The IP67 rating provides temporary protection, but prolonged submersion should be avoided.
8. Vianmääritys
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Valo ei syty. | Ei virtalähdettä. | Check if the power adapter is securely plugged into the outlet and the light. |
| Valo on himmeä tai välkkyy. | Virheellinen kirkkausasetus. | Adjust brightness using the W +/- or RGB +/- buttons. |
| Ajastintoiminto ei toimi. | Ajastin ei asetettu oikein. | Ensure the TIMER button has been pressed to select a duration (5H, 10H, or 12H). |
| Light falls into water. | Väärä asennus. | Immediately unplug, retrieve, and dry the unit. Re-mount securely. |
9. Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Malli | AQ109-14W |
| Tehoa | 14W |
| Värilämpötila | 6500K |
| Lumen | 534 |
| LEDien lukumäärä | 39 |
| Valonlähteen tyyppi | RGB+LED |
| Materiaali | Akryylinitriilibutadieenistyreeni (ABS) |
| Voitage | 100 volttia |
| Vesitiivis luokitus | IP67 |
| Elinikä | Noin 50,000 tuntia |
| Yksikön mitat (P x L x K) | 25 x 10.2 x 1.6 cm |
| Yhteensopiva akvaarion koko | 30-45 cm |
10. Takuu ja tuki
This AQQA Aquarium LED Light comes with a 1 vuoden laatutakuu from the date of purchase. If you encounter any quality-related issues during this period, please do not hesitate to contact our customer support team. We are committed to responding within 24 hours and providing prompt assistance.
For support, please refer to the contact information provided with your purchase or visit the official AQQA store on Amazon.