SYNCO Xvision Video Transmission System User Manual

1. Tuote ohiview

The SYNCO Xvision Video Transmission System provides stable and high-quality wireless video transmission for professional filming, live streaming, and TVC production. This system includes one transmitter (TX) and one receiver (RX), designed for real-time monitoring with ultra-low latency.

Figure 1.1: SYNCO Xvision Video Transmission System (1 TX and 1 RX) and included USB-C cables.

Tärkeimmät ominaisuudet:

• Superior Signal Penetration: Stable 1080P/60fps video transmission over long distances (up to 300m) using SYNCO's ultra-penetration technology.
• Erittäin pieni latenssi: Achieves a 40ms latency for precise real-time feedback, crucial for dynamic shooting environments.
• Low Power Design: Utilizes advanced low-power chips and intelligent power management, consuming only 2W, ensuring quiet and efficient operation without fan cooling.
• All-in-One Assistive App (SYNCO Link): Supports real-time monitoring, image adjustments (zebra stripes, mirror, inverse colors), video saving, screenshot, and playback functions.
• Smart Design, Easy Operation: Features a 1.47-inch large display for real-time device status, intuitive button layout, and automatic pairing memory.
• Joustavat tehovaihtoehdot: Supports NP-F battery (7.4-8.4V) and USB-C power input (5V 2A) for versatile use.
• Kompakti ja kevyt: Weighs only 119g with foldable antennas, making it highly portable.

2. Mitä laatikossa on

• 1 x lähetin (TX)
• 1 x vastaanotin (RX)
• 1 x Type-C kaapeli

Figure 2.1: Included components: Transmitter, Receiver, and Type-C Cable.

3. Laitteen asettelu ja portit

Familiarize yourself with the various components and connection points of the SYNCO Xvision units.

Kuva 3.1: Sivu view of the unit highlighting the Power Switch, Pairing Button, and 5V IN USB-C Port.

Figure 3.2: HDMI ports on the Transmitter (HDMI IN, HDMI OUT/Loop Out) and Receiver (2x HDMI OUT).

• Virtakytkin: Used to turn the device On or Off.
• Pariliitospainike: Initiates the pairing process between units.
• USB-C Port (5V IN): Virtalähteeksi.
• HDMI IN (Transmitter): Connects to the video source (e.g., camera).
• HDMI OUT (Transmitter - Loop Out): Allows for local monitoring of the input signal.
• HDMI OUT (Receiver): Connects to display monitors. The receiver has two HDMI OUT ports.
• antennit: Foldable antennas for signal transmission and reception.

4. Asennus ja käyttöönotto

4.1 Laitteen virran kytkeminen

The SYNCO Xvision system offers flexible power options:

• NP-F-akku: Insert a compatible NP-F battery (7.4-8.4V) into the battery slot. Press the lock button to slide the battery in or out.
• USB-C Virta: Connect a 5V 2A power source to the USB-C port.

Figure 4.1: Attaching an NP-F battery to the unit.

Figure 4.2: Powering the unit via USB-C cable.

4.2 Unfolding Antennas

Before operation, gently unfold the antennas on both the transmitter and receiver units to ensure optimal signal performance.

Figure 4.3: Unfolding the antenna for operation.

4.3 Virta päälle/pois

To power on the device, slide the power switch down. To power off, slide the switch up. The device will automatically reconnect to a previously paired device upon startup.

4.4 Yksiköiden parittaminen

The transmitter (TX) and receiver (RX) units typically come pre-paired. If re-pairing is necessary or for pairing additional receivers:

1. Varmista, että sekä lähetin että vastaanotin ovat päällä.
2. Long press the pairing buttons on both the transmitter and receiver for 5 seconds to enter pairing mode.
3. Once paired, the screen will display "Paired".

Note: A single transmitter supports up to 4 receivers (including RX and APP monitoring devices). The device will exit pairing mode if no device is found within 90 seconds. Pair receivers one at a time.

4.5 Laitteisiin kytkeminen

1. Connect the HDMI cable from your camera or video source to the HDMI-IN lähettimen portti.
2. Connect an HDMI cable from the receiver's HDMI OUT port to your monitor's HDMI-IN portti.

Figure 4.4: Transmitter connected to a camera.

Figure 4.5: Receiver connected to a monitor.

5. Järjestelmän käyttö

5.1 Valvontanäyttö

The 1.47-inch display on both units provides real-time status information, including:

• Transmitter (TX) / Receiver (RX) status
• WiFi-yhteyden tila
• Connection signal strength
• Tehotaso
• Resolution (e.g., 1080P)
• Frame Rate (e.g., 60fps)
• Bitstream (e.g., 1Mbps)

Figure 5.1: Display indicators for operational status.

5.2 Using the SYNCO Link App

The SYNCO Link App enhances your monitoring experience with additional features:

• Real-time monitoring on your smart device.
• Precise image adjustments (zebra stripes, mirror, inverse colors).
• Built-in video saving, screenshot, and playback functions.

Refer to the SYNCO Link App manual for detailed instructions on connecting and using the app.

5.3 Multi-User Monitoring

The system supports simultaneous wired and wireless transmission, enabling efficient collaboration. Real-time monitoring across multiple devices is ideal for directors, lighting designers, makeup artists, and art directors.

Figure 5.2: Multi-user monitoring setup.

6. Huolto

• Keep the units clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Vältä laitteiden altistamista äärimmäisille lämpötiloille, kosteudelle tai suoralle auringonvalolle.
• Store the units in a dry, cool place when not in use.
• Ensure all cables are properly connected and not strained.
• Regularly check for firmware updates from the manufacturer's official websivuston optimaalisen suorituskyvyn ja yhteensopivuuden varmistamiseksi.

7. Vianmääritys

8. Tekniset tiedot

9. Virallinen tuotevideo

Watch the official product video for a visual guide on unboxing, product introduction, power options, ports, and operational procedures.

10. Takuu ja tuki

For warranty information, technical support, or service inquiries, please refer to the official SYNCO websivustolta tai ota yhteyttä suoraan heidän asiakaspalveluunsa. Säilytä ostokuitti takuuvaatimuksia varten.