M9-automaattisen saippua-annostelijan käyttöohje

1. Tuote ohiview

The M9 Automatic Soap Dispenser is a touch-free foam dispenser designed for both liquid soap and hand sanitizer. Its automatic-sensing technology ensures hygienic dispensing, making it suitable for various environments such as bathrooms, kitchens, hotels, and offices. The dispenser features a modern white design with a ribbed texture and a transparent window for monitoring liquid levels. It offers flexible installation options, allowing for wall mounting or desktop placement.

Kuva 1: Etuosa view of the M9 Automatic Soap Dispenser, showcasing its sleek design and transparent liquid level window.

2. Tärkeimmät ominaisuudet

• Kosketuston toiminta: Advanced infrared sensor technology for hands-free dispensing.
• Monipuolinen sijoitus: Can be wall-mounted or used as a desktop unit.
• Monikäyttöinen käyttö: Compatible with foam soaps, hand sanitizers, facial cleansers, and laundry detergents.
• Tyylikäs muotoilu: White exterior with ribbed texture, clear window, and fingerprint-resistant finish.
• Convenient Refill: Large capacity tank with easy-to-access top opening.

3. Pakkauksen sisältö

Tarkista pakkauksesta seuraavat tuotteet:

• M9 Automatic Soap Dispenser Unit
• Käyttöopas
• Wall Mounting Accessories (if applicable)

4. Asennusopas

1. Asenna paristot: Open the battery compartment (usually at the bottom or back) and insert the required batteries (not included). Ensure correct polarity.
2. Täytä nesteellä: Open the top cap of the dispenser. Pour your desired foam soap, liquid soap (diluted for foaming), or hand sanitizer into the reservoir. Do not overfill.

Figure 2: Illustration of filling the dispenser with different types of liquid, such as foam soap, hand sanitizer, laundry detergent, or facial cleanser.
3. Valitse sijoitus:
   • Työpöytäkäyttö: Place the dispenser on a flat, stable surface.
   • Seinäkiinnitys: Use the provided mounting accessories to securely attach the dispenser to a wall. Ensure it is placed at a convenient height and away from direct water spray.
4. Virta päälle: Locate the power button (if any) and turn the dispenser on. Some models may power on automatically upon battery insertion.

5. Käyttöohjeet

1. Dispensing Foam: Place your hand approximately 2-3 inches directly under the nozzle. The infrared sensor will detect your hand and automatically dispense a measured amount of foam.

Figure 3: A hand positioned under the dispenser's nozzle, demonstrating the automatic foam dispensing action.
2. Adjusting Foam Output (if applicable): Some models may have a button or setting to adjust the volume of foam dispensed. Refer to the specific controls on your device for this feature.
3. Merkkivalot: Observe any indicator lights for status, such as low battery or dispensing activity.

6. Huolto

• Täyttö: When the liquid level in the transparent window is low, refill the dispenser as described in the "Setup Guide" (Section 4).
• Puhdistus: Pyyhi annostelijan ulkopinta pehmeällä,amp cloth. Do not submerge the unit in water or use abrasive cleaners.
• Akun vaihto: Replace batteries when the dispenser's performance diminishes or indicator lights signal low power.
• Prevent Clogging: If using liquid soap, ensure it is diluted appropriately for foaming. Use a 1:3 or 1:4 soap-to-water ratio for best results.

7. Vianmääritys

8. Tekniset tiedot

9. Takuu ja tuki

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the packaging or contact the retailer where the product was purchased. For technical support or further assistance, please contact the manufacturer's customer service.

Säilytä ostokuittisi ostotodistuksena takuuvaatimuksia varten.