1. Johdanto
This manual provides detailed instructions for the safe and effective use of your VOOPOO Vinci Spark 220 Mod. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage or injury. The Vinci Spark 220 Mod is a high-performance electronic cigarette device designed for experienced users. It requires external 18650 batteries and a compatible tank and coils, which are not included with this product.
Note: This product does not contain nicotine, tobacco, or e-liquid. It is intended for use with nicotine-free e-liquids only.
2. Pakkauksen sisältö
Tarkista pakkauksesta seuraavat tuotteet:
- 1 x VOOPOO Vinci Spark 220 Device (Mod only)
- 1 x Type-C USB-kaapeli
- 1 x Käyttöohje
Note: External 18650 batteries, tank, and coils are not included and must be purchased separately.
3. Tuote ohiview
The VOOPOO Vinci Spark 220 Mod features an innovative all-metal design, offering a compact and lightweight form factor. It supports dual external 18650 batteries and delivers up to 220W of power. The device includes a 1.47-inch TFT screen and a multifunctional wheel button for intuitive control.
Image 3.1: VOOPOO Vinci Spark 220 Mod, showcasinsen muotoilu ja saatavilla olevat värit.
Image 3.2: Key features of the Vinci Spark 220 Mod, including its 108g weight, 1.47-inch TFT screen, and high display resolution.
Tärkeimmät komponentit:
- 510 liitin: For attaching compatible tanks.
- Multifunctional Wheel Button: For power, wattage adjustment, and menu navigation.
- 1.47'' TFT Screen: Näyttää laitetiedot.
- Akkulokero: Houses dual 18650 batteries.
- C-tyypin USB-portti: Lataus- ja laiteohjelmistopäivityksiä varten.
- Power & Function Lock Switch: Laitteen kiinnittämiseksi.
4. Asennus
4.1 Akun asennus
- Varmista, että laitteen virta on katkaistu.
- Locate the easy-to-clip battery cover on the side of the device.
- Avaa akun kansi.
- Insert two external 18650 batteries according to the correct polarity markings (+ and -) inside the compartment. Incorrect installation can damage the device.
- Sulje paristokotelon kansi tiiviisti, kunnes se napsahtaa paikalleen.
Image 4.1: Illustration of the battery compartment and the multifunctional wheel button.
4.2 Ensimmäinen lataus
Although the device supports 5V/3A fast charging, it is recommended to charge external 18650 batteries using a dedicated external battery charger for optimal battery life and safety. If using the device's Type-C port:
- Liitä Type-C USB-kaapeli laitteen latausporttiin.
- Connect the other end of the cable to a suitable 5V/3A power adapter (not included).
- Näytöllä näkyy lataustila.
- Irrota laite, kun se on täysin latautunut.
4.3 Tank and Coil Installation (Not Included)
The Vinci Spark 220 Mod is compatible with the Uforce-X Tank (PnP X) and all PnP X Coils. Refer to the specific tank and coil manual for installation instructions. Ensure the tank is securely screwed onto the 510 connector of the mod.
5. Käyttö
5.1 Virta päälle/pois
- Virta päälle: Press the fire button 5 times rapidly within 2 seconds.
- Virta pois: Press the fire button 5 times rapidly within 2 seconds. Alternatively, use the dedicated Power & Function Lock Switch for quick power off and locking.
5.2 Tilan valinta
The device supports three setting modes: Smart, RBA, and TC-TCR Mode. Navigate through the menu using the multifunctional wheel button to select your desired mode.
- Älykäs tila: Automatically detects coil resistance and sets an appropriate wattage, preventing accidental coil burnout.
- RBA-tila: Allows full wattage control for advanced users and rebuildable atomizers.
- TC-TCR Mode: Temperature Control mode for specific coil materials (e.g., Stainless Steel, Titanium, Nickel).
5.3 wattiatage Säätö
Use the multifunctional wheel button to adjust the wattage. Rotate the wheel clockwise to increase wattage and counter-clockwise to decrease it. The wattage range is 5-220W.
5.4 Näyttöliittymä
The 1.47-inch TFT screen displays essential information such as current wattage, battery level, coil resistance, voltage, and puff count. The device offers 3 interface themes for customization.
5.5 Lock/Unlock Function
The dedicated Power & Function Lock Switch allows you to quickly lock or unlock the device, preventing accidental firing or setting changes during transport.
6. Huolto
6.1 Laitteen puhdistaminen
- Regularly wipe the device with a dry, soft cloth to remove dust and fingerprints.
- Clean the 510 connector area with a cotton swab to ensure good conductivity between the mod and the tank.
- Vältä hankaavien tai voimakkaiden kemikaalien käyttöä, sillä ne voivat vahingoittaa pintaa.
6.2 Akun hoito
- Käytä aina laadukkaita 18650-akkuja tunnetuilta tuotemerkeiltä.
- Inspect battery wraps for damage regularly. Replace damaged batteries immediately.
- Store spare batteries in protective cases.
- Älä altista akkuja äärimmäisille lämpötiloille tai suoralle auringonvalolle.
7. Vianmääritys
If you encounter issues with your Vinci Spark 220 Mod, refer to the following common problems and solutions:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Laite ei käynnisty | Low battery, incorrect battery installation, device locked. | Charge batteries, re-install batteries with correct polarity, unlock device using the switch or 5 clicks. |
| "Atomizer Short" or "No Atomizer" message | Tank not connected, faulty coil, short circuit in tank. | Ensure tank is securely attached, replace coil, clean 510 connector. |
| Weak vapor production | Matala wattitage, low battery, old coil. | Lisää wattiatage, charge batteries, replace coil. |
| Laite ei lataudu | Viallinen kaapeli, virtalähde tai latausportti. | Try a different Type-C cable and power adapter. Ensure port is clean. Consider external battery charger. |
If the problem persists, please contact VOOPOO customer support.
8. Tekniset tiedot
Technical specifications for the VOOPOO Vinci Spark 220 Mod:
- Merkki: VOOPOO
- Tuotteen nimi: Vinci Spark 220 Mod
- Akku: Dual external 18650 batteries (not included)
- Tehoalue: 5-220W
- Lähtö Voltage: 3.2-4.2V
- Lataus: Tyyppi-C 5V/3A
- Näyttö: 1.47'' TFT
- Vastusalue: 0.1-3.0Ω
- Compatible Tank: Uforce-X Tank (PnP X)
- Compatible Coils: All PnP X Coils
- Materiaali: Alumiiniseos
- Tuotteen mitat: 45 x 29 x 95 mm (noin 4.5 x 2.9 x 9.5 cm)
- Paino: 340 g (with packaging, device weight is approx. 108g)
Image 8.1: Features of compatible Uforce-X Tank and PnP X Coils, including top airflow, slide-to-fill mechanism, and coil compatibility for rich flavor. Note: Tank and coils are sold separately.
Kuva 8.2: ohiview of available colors and a summary of key specifications for the Vinci Spark 220 Mod.
9. Turvallisuustiedot
Noudata seuraavia turvaohjeita:
- Pidä laite poissa vedestä ja muista nesteistä.
- Älä altista laitetta äärimmäisille lämpötiloille tai suoralle auringonvalolle.
- Älä pudota, puhkaise tai pura laitetta.
- Use only the recommended external 18650 batteries and ensure they are in good condition.
- Charge the device on a fire-proof surface and never leave it unattended while charging.
- Säilytä poissa lasten ja lemmikkieläinten ulottuvilta.
- Tämä tuote on tarkoitettu vain aikuisille käyttäjille.
- This product does not contain nicotine and is intended for use with nicotine-free e-liquids.
10. Takuu ja tuki
VOOPOO products come with a limited warranty. Please refer to the warranty card included in your package or visit the official VOOPOO websivustolta tarkemmat takuuehdot.
For technical support, troubleshooting assistance, or any other inquiries, please contact VOOPOO customer service through their official websivustolta tai jälleenmyyjältä, jolta ostit tuotteen.