ECOXGEAR GDI-EXPLRXL01

ECOXGEAR EcoExplorer XL -käyttöohje

Malli: GDI-EXPLRXL01

Johdanto

Welcome to the ECOXGEAR EcoExplorer XL user manual. This guide provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your new portable Bluetooth speaker. The EcoExplorer XL is designed for both indoor and outdoor use, featuring powerful audio, party lights, and IPX5 waterproofing.

Please read this manual thoroughly before using your speaker to ensure proper operation and to maximize its lifespan.

Mitä laatikossa on

Varmista, että pakkauksessasi on kaikki tarvittavat osat:

  • 1x EcoExplorer XL Speaker
  • 1x 3FT USB TYPE-C Charging Cable
  • 1x 3FT Aux-In Audio Cable
  • Käyttöopas (tämä käyttöohje)
ECOXGEAR EcoExplorer XL speaker and included accessories

Image: The EcoExplorer XL speaker shown with its USB-C charging cable and Aux-In cable.

Tuote loppuview

Ohjaimet ja portit

Familiarize yourself with the various controls and connection ports on your EcoExplorer XL speaker.

Yläosa view of EcoExplorer XL speaker showing control panel

Image: Top panel of the EcoExplorer XL speaker, displaying the control buttons for power, Bluetooth, volume, EQ, and party lights.

  • Virtapainike: Kytkee kaiuttimen päälle tai pois päältä.
  • Bluetooth-painike: Käynnistää Bluetooth-pariliitostilan.
  • Äänenvoimakkuuden ylös / alas-painikkeet: Adjusts the speaker's output volume.
  • Toisto/tauko-painike: Ohjaa äänen toistoa.
  • EQ-painike: Cycles through different equalizer presets.
  • Juhlavalopainike: Changes or disables the LED lighting effects.
  • Echo +/- Buttons: Adjusts microphone echo effect (for external microphone).
  • Microphone Volume +/- Buttons: Adjusts external microphone volume.
Close-up of the ECOXGEAR logo and port cover on the speaker

Kuva: Lähikuva view of the ECOXGEAR logo and the sealed port cover, which protects the charging and audio input ports from water.

The sealed port cover on the back of the speaker protects the USB-C charging port, 3.5mm Aux-In port, and 6.35mm microphone jack.

Asennus

1. Kaiuttimen lataaminen

Before first use, fully charge the EcoExplorer XL. A full charge takes approximately 4.5 hours.

  1. Open the sealed port cover on the back of the speaker.
  2. Connect the included USB TYPE-C charging cable to the speaker's USB-C port.
  3. Liitä USB-kaapelin toinen pää yhteensopivaan USB-virtalähteeseen (ei sisälly toimitukseen) tai virtaa saavaan USB-porttiin.
  4. Latauksen merkkivalo näyttää latauksen tilan. Kun akku on ladattu täyteen, valo muuttuu tai sammuu.

2. Virta päälle/pois

  • Käynnistä painamalla -painiketta pitkään Virtapainike until you hear an audible confirmation.
  • Katkaise virta pitämällä -painiketta painettuna Virtapainike uudelleen, kunnes kaiutin sammuu.

3. Bluetooth-pariliitos

Connect your EcoExplorer XL to a Bluetooth-enabled device (e.g., smartphone, tablet) for wireless audio streaming.

  1. Varmista, että kaiuttimeen on kytketty virta.
  2. Paina Bluetooth-painike on the speaker. The Bluetooth indicator light will flash, indicating it's in pairing mode.
  3. Siirry laitteellasi Bluetooth-asetuksiin ja etsi käytettävissä olevia laitteita.
  4. Select "ECOXGEAR EcoExplorer XL" from the list.
  5. Kun yhteys on muodostettu, kaiuttimen Bluetooth-merkkivalo palaa tasaisesti ja kuulet vahvistusäänen.

The speaker supports Bluetooth 5.3 and can maintain a connection up to 100 feet away.

4. Aux-In-liitäntä

For devices without Bluetooth, use the included 3.5mm Aux-In cable.

  1. Open the sealed port cover.
  2. Connect one end of the 3.5mm Aux-In cable to the speaker's Aux-In port.
  3. Liitä toinen pää laitteen kuulokeliitäntään tai äänilähtöön.
  4. The speaker will automatically switch to Aux-In mode.

5. Mikrofoniliitäntä (valinnainen)

An external 6.35mm microphone (sold separately) can be connected for PA use or karaoke.

  1. Open the sealed port cover.
  2. Insert the microphone's 6.35mm jack into the speaker's microphone input.
  3. Säädä mikrofonin äänenvoimakkuutta käyttämällä Microphone Volume +/- Buttons and echo effect using the Echo +/- Buttons.

Käyttöohjeet

Äänen toisto

  • Äänenvoimakkuuden säätö: Käytä Äänenvoimakkuus ylös/alas -painikkeet on the speaker or your connected device to adjust the audio level.
  • Toista/tauko: Paina Toisto/Tauko-painike to start or stop audio playback.
  • Reitin navigointi: (If supported by your device and connection type) Use your connected device to skip tracks.

EQ-esiasetukset

The EcoExplorer XL features three built-in EQ presets to optimize sound for different environments:

  • Paina EQ-painike to cycle through the presets.
  • Maximum Bass: Enhances low frequencies for a powerful bass response.
  • Warmer Profile: Ideal for indoor listening, providing a balanced and rich sound.
  • High Frequency Profile: Maximizes decibel levels for loud outdoor playback.

Juhlavalot

The speaker includes multi-pattern front flashing adjustable LED lighting effects.

EcoExplorer XL speaker with vibrant party lights illuminated

Image: The EcoExplorer XL speaker displaying its dynamic, multi-color LED party lights around the speaker grille.

  • Paina Juhlavalopainike to cycle through the 6 different light modes.
  • Continue pressing to turn the lights off.

Wireless Pairing Mode (Stereo Pairing)

Wirelessly pair two EcoExplorer XL speakers together for a true stereo sound experience.

  1. Ensure both EcoExplorer XL speakers are powered on and not connected to any Bluetooth devices.
  2. Pidä painettuna yhden kaiuttimen (tämä on ensisijainen kaiutin) -painiketta Bluetooth-painike until you hear a specific pairing tone.
  3. Paina toisessa kaiuttimessa Bluetooth-painike lyhyesti.
  4. The speakers will attempt to connect to each other. Once successfully paired, you will hear a confirmation tone, and the Bluetooth indicator lights on both speakers will become solid.
  5. Yhdistä nyt laitteesi ensisijaiseen kaiuttimeen Bluetoothin kautta "Bluetooth-pariliitos" -osiossa kuvatulla tavalla. Ääni toistetaan molemmista kaiuttimista stereona.

Huolto

Puhdistus

To clean your EcoExplorer XL, use a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the speaker's finish or components.

Vedenpitävyys (IPX5)

The EcoExplorer XL is rated IPX5 waterproof, meaning it is protected against low-pressure water jets from any direction. This makes it suitable for use in environments where it might encounter splashes, rain, or light spray.

EcoExplorer XL speaker near a pool, demonstrating IPX5 water resistance

Image: The EcoExplorer XL speaker positioned near the edge of a swimming pool, illustrating its IPX5 waterproof rating against splashes.

Tärkeää:

  • Ensure the sealed port cover on the back of the speaker is securely closed before exposing the speaker to water.
  • Kaiutin on ei designed to float or be submerged in water. Submerging the speaker will cause damage and void the warranty.

Akun hoito

Sisäänrakennetun litiumioniakun käyttöiän pidentämiseksi:

  • Vältä akun usein toistuvaa täydellistä tyhjentymistä.
  • Säilytä kaiutinta viileässä ja kuivassa paikassa, kun sitä ei käytetä pitkään aikaan.
  • Recharge the battery at least once every 3-6 months if stored for a long time.

Vianetsintä

OngelmaMahdollinen syy / Ratkaisu
Kaiutin ei käynnisty.Battery may be depleted. Connect the speaker to a power source using the USB-C cable and charge it.
Kaiuttimesta ei kuulu ääntä.
  • Check speaker volume and connected device volume.
  • Ensure the speaker is properly connected via Bluetooth or Aux-In.
  • If using Bluetooth, ensure the speaker is paired and connected to the correct device.
Bluetooth connection unstable or drops.
  • Ensure the speaker and device are within the 100-foot Bluetooth range.
  • Reduce obstacles between the speaker and device (e.g., walls, large metal objects).
  • Kokeile laitteen pariliitoksen purkamista ja pariliitoksen muodostamista uudelleen.
  • Sammuta muut lähellä olevat Bluetooth-laitteet, jotka saattavat aiheuttaa häiriöitä.
Cannot pair two speakers in Wireless Pairing Mode.
  • Ensure both speakers are EcoExplorer XL models.
  • Make sure neither speaker is currently connected to another Bluetooth device.
  • Follow the Wireless Pairing Mode instructions carefully, ensuring the primary speaker is set up first.
Party lights not working.Paina Juhlavalopainike to cycle through modes or turn them on.

Tekniset tiedot

OminaisuusYksityiskohta
Mallin nimiEcoExplorer XL
MallinumeroGDI-EXPLRXL01
Huippulähtöteho40 wattia
Signaali-kohinasuhde80 dB
Bluetooth-versio5.3
Bluetooth-alueJopa 100 jalkaa
VedenkestävyysIPX5 (roisketiivis)
Akun kesto7+ Hours (at 75% volume)
LatausaikaNoin 4.5 tuntia
Akun tyyppiLitiumioniakku (4000 mAh)
Mitat (S x L x K)6.1 cm x 14.2 cm x 14.8 cm
Tuotteen paino12.3 puntaa
Mukana olevat komponentitSpeaker, USB-C Charging Cable, Aux-In Cable, User Guide

Takuu ja tuki

Takuutiedot

The ECOXGEAR EcoExplorer XL comes with a 1 vuoden valmistajan takuu. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or submersion in water.

Säilytä ostokuitti takuuvaatimuksia varten.

Asiakastuki

For technical assistance, warranty claims, or further inquiries, please contact ECOXGEAR customer support:

  • Websivusto: www.ecoxgear.com
  • Refer to the ECOXGEAR websivustolta ajantasaisimmat yhteystiedot ja tukiresurssit.

© 2025 ECOXGEAR. All rights reserved.

ECOXGEAR is a registered trademark of Grace Digital Inc.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.