1. Johdanto
This manual provides essential instructions for the installation, operation, and maintenance of the EPEVER Tracer AN G3 MPPT Solar Charge Controller. The Tracer AN G3 series is an advanced Maximum Power Point Tracking (MPPT) charge controller designed for off-grid solar systems, ensuring efficient power conversion and battery management. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
2. Turvallisuusohjeet
Noudata seuraavia turvaohjeita asennuksen ja käytön aikana:
- Varmista, että kaikki johdot on polarisoitu oikein ja kytketty tukevasti, jotta ohjain ja muut komponentit eivät vaurioidu.
- Kytke aina ensin akku lataussäätimeen, sitten aurinkopaneeli ja lopuksi kuorma. Irrota päinvastaisessa järjestyksessä.
- Do not disassemble or attempt to repair the controller. Refer to qualified personnel for service.
- Install the controller in a well-ventilated area, away from flammable gases, moisture, and direct sunlight.
- Use appropriate circuit breakers or fuses for the solar panel, battery, and load circuits.
- Käytä silmäsuojaimia työskennellessäsi akkujen kanssa.
3. Tuotteen ominaisuudet
The EPEVER Tracer AN G3 MPPT Solar Charge Controller offers the following key features:
- Edistynyt MPPT-teknologia: Maximizes energy harvest from solar panels, adapting to various solar conditions.
- Monipuolinen akun tuki: Compatible with Lithium batteries (LiFePO4, Li(NiCoMn)O2) and Lead-Acid batteries (AGM, GEL, Flooded, USER defined).
- Direct Lithium Battery Parameter Adjustment: Lithium battery parameters can be set directly from the controller's display without additional accessories.
- Comprehensive Electronic Protections: Includes protection against PV over-current, PV short circuit, PV reverse polarity, battery reverse polarity, battery over-voltage, battery over-discharge, load short circuit, load overload, and over-temperature.
- Remote Monitoring with MT52: Real-time display of operational data, remote load switching, data browsing, and parameter modification via the MT52 remote meter.
- Viestintärajapinnat: Advanced communication features for seamless integration with monitoring devices and software.
- Sertifikaatit: CE-, FCC- ja RoHS-yhteensopiva.
4. Tuote ohiview
Familiarize yourself with the components and interfaces of the Tracer AN G3 controller.
Kuva 4.1: EPEVER Tracer AN G3 MPPT Solar Charge Controller with labeled components.
Tämä kuva näyttää etupuolen view of the EPEVER Tracer AN G3 solar charge controller, highlighting its various ports and buttons with numbered labels. Key components include the LCD screen, control buttons (SELECT, ENTER), temperature sensor port, PV terminals, battery terminals, load terminals, and RS485 communication interface.
| Ei. | Komponentti | Kuvaus |
|---|---|---|
| 1 | SELECT-painike | Käytetään valikoissa navigointiin ja vaihtoehtojen valitsemiseen. |
| 2 | RTS Interface | Etälämpötila-anturin portti. |
| 3 | PV-terminaalit | Input terminals for solar panel connection. |
| 4 | Akun liittimet | Terminals for battery connection. |
| 5 | Lataa terminaalit | Output terminals for DC load connection. |
| 6 | RS485-liittymä | Communication port for remote meter (MT52) or PC connection. |
| 7 | Asennusreikä | Holes for mounting the controller. |
| 8 | ENTER -painike | Käytetään valintojen vahvistamiseen ja valikoihin siirtymiseen. |
| 9 | LCD | Liquid Crystal Display for status and parameter viewing. |
Kuva 4.2: Dimensions of the EPEVER Tracer AN G3 Solar Charge Controller.
This image illustrates the physical dimensions of the EPEVER Tracer AN G3 controller, showing its length (172mm), width (139mm), and depth (44mm).
5. Asennus ja asennus
Follow these steps for proper installation of your solar charge controller.
5.1 Ohjaimen asennus
- Valitse kuiva, hyvin ilmastoitu paikka, suojassa suoralta auringonvalolta, korkeilta lämpötiloilta ja kosteudelta.
- Ensure there is sufficient air circulation around the controller for heat dissipation.
- Mount the controller vertically on a wall or flat surface using the provided mounting holes (refer to Figure 4.2 for dimensions).
5.2 Johdotusjärjestys
Tärkeää: Always connect in the following order to prevent damage:
- Liitä akku: Connect the battery to the controller's battery terminals (positive to positive, negative to negative). The controller will power on.
- Liitä aurinkopaneeli: Connect the solar panel to the controller's PV terminals (positive to positive, negative to negative).
- Kytke tasavirtakuorma: Connect the DC load to the controller's load terminals (positive to positive, negative to negative).
To disconnect, follow the reverse order: load, then solar panel, then battery.
5.3 Järjestelmän kytkentäkaaviot
The Tracer AN G3 supports various system configurations. Below are general wiring principles. For detailed diagrams, refer to the full product manual or consult a qualified installer.
Kuva 5.1: Example wiring for a solar system with the EPEVER Tracer AN G3 controller.
This image shows a typical setup including solar panels, the charge controller, a battery, and a DC load. Ensure correct polarity for all connections.
5.4 Accessory Connections
The controller can be connected to various accessories for enhanced monitoring and control.
- Remote Temperature Sensor (RTS): Connect the RTS to the designated port (No. 2 in Figure 4.1) for accurate battery temperature compensation.
- MT52 Remote Meter: Connect the MT52 to the RS485 port (No. 6 in Figure 4.1) using an RJ45 cable for remote monitoring and parameter settings.
- PC/Mobile App: Use EPEVER communication cables (e.g., RS485 to USB, WiFi, or Bluetooth adapters) to connect the controller to a PC or mobile device for advanced monitoring and configuration via EPEVER software/app.
6. Käyttöohjeet
6.1 LCD-näyttö ja painikkeet
The LCD displays real-time system data. Use the SELECT and ENTER buttons (No. 1 and 8 in Figure 4.1) to navigate menus and adjust parameters.
- VALITSE: Short press to browse different display screens or menu options. Long press to enter/exit parameter setting mode.
- TULLA SISÄÄN: Short press to confirm a selection or value. Long press to save settings.
6.2 Akkutyypin valinta
It is crucial to select the correct battery type for optimal charging and battery longevity. The Tracer AN G3 supports:
- Lead-Acid: GEL, AGM, Flooded, USER (user-defined parameters).
- litium: LiFePO4 (4s/8s), Li(NiCoMn)O2 (3s/6s/7s), USER (user-defined parameters).
To change the battery type, navigate to the battery settings menu on the LCD or use the MT52 remote meter/PC software. For USER defined types, you can customize charging voltages.
6.3 Latausvirran säätäminen
The maximum charging current can be adjusted to suit your battery's specifications or system requirements. This feature is typically accessible via the EPEVER mobile app or PC software connected through the RS485 port.
Kuva 6.1: Example of parameter adjustment via the controller's interface or connected device.
This image shows the controller's display, which can be used to view and potentially adjust certain parameters. More advanced adjustments, such as maximum charging current, are often done through a connected app or PC software.
7. Huolto
Regular maintenance ensures the longevity and optimal performance of your Tracer AN G3 controller.
- Tarkista liitännät: Tarkista säännöllisesti kaikkien johtojen liitännät kireyden ja korroosion varalta. Löysät liitännät voivat aiheuttaa ylikuumenemista ja vaurioita.
- Puhdista ohjain: Keep the controller clean and free of dust and debris. Use a dry cloth to wipe the casing. Ensure ventilation openings are not blocked.
- Tarkista vauriot: Tarkista, onko c:ssä fyysisiä vaurioita.asing, cables, or terminals.
- Akun tarkastus: For lead-acid batteries, check electrolyte levels (if applicable) and terminal corrosion. Ensure lithium batteries are within their recommended operating parameters.
- Ympäristöolosuhteet: Ensure the operating environment remains within the specified temperature range (-25 °C to +45 °C) and humidity levels.
8. Vianmääritys
If you encounter issues with your Tracer AN G3 controller, refer to the following common problems and solutions:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Ohjain ei käynnisty | Akkua ei ole kytketty tai sen napaisuus on väärin päin; akun varaustilatage liian alhainen. | Tarkista akun liitännät ja napaisuus. Varmista akun jännite.tage on yli vähimmäiskäyttötilavuudentage. |
| Ei aurinkolatausta | Solar panel not connected or reverse polarity; PV voltage too low/high; PV short circuit. | Check PV connections and polarity. Verify PV open circuit voltage is within specifications (Max. 100V). Check for shading or damage to solar panels. |
| Kuorma ei toimi | Load not connected or reverse polarity; load short circuit/overload; battery low voltage katkaise yhteys. | Check load connections and polarity. Reduce load. Charge battery. Check load settings on controller. |
| Epätarkka lämpötilalukema | RTS sensor not connected or faulty. | Ensure RTS is securely connected and placed near the battery. Replace if faulty. |
For more detailed troubleshooting, refer to the complete product manual or contact EPEVER customer support.
9. Tekniset tiedot
| Parametri | Arvo |
|---|---|
| Nominal System Voitage | 12V/24VDC Auto |
| Nimellislatausvirta | 10A |
| Nimellispurkausvirta | 10A |
| Max. PV Open Circuit Voltage | 100V |
| Max. PV syöttöteho | 130W/12V, 260W/24V |
| Akkutyyppien tuki | Lithium (LiFePO4, Li(NiCoMn)O2), Lead-Acid (AGM, GEL, Flooded, USER) |
| RS485-liittymä | 5VDC / 200mA |
| Käyttölämpötila | -25 °C - +45 °C |
| Suojausluokka | IP30 |
| Mitat (P x L x K) | 172 x 139 x 44 mm |
| Paino | 0.57 kg |
| Näytön tyyppi | LCD |
| Sertifikaatit | CE, FCC, RoHS |
10. Takuu ja tuki
The EPEVER Tracer AN G3 MPPT Solar Charge Controller comes with a 2 vuoden valmistajan takuu ostopäivästä alkaen.
This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or acts of nature.
For technical support, warranty claims, or further assistance, please contact your local EPEVER distributor or visit the official EPEVER websivustolta yhteystiedot.
EPEVER Official Websivusto: www.epever.com
