1. Johdanto
This manual provides comprehensive instructions for the installation, operation, and programming of your DieseRC Wireless Roller Shutter Remote Control Switch. This device is designed to wirelessly control AC motors, enabling forward, reverse, and stop functions for applications such as garage doors, electric gates, and roller shutters. Please read this manual carefully before use to ensure proper functionality and safety.
2. Pakkauksen sisältö
- 1 x Relay Receiver Board
- 2 x Transmitters (battery included)
- 1 x tuoteopas
3. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Vastaanotin Working Voltage | AC 90V ~ 250V |
| Hiljainen virta | <10 mA |
| Max. Nykyinen | 3A (Inductive Load), 10A (Resistive Load) |
| RF-taajuus | 433 MHz |
| Käyttölämpötila | -30°C - +80°C |
| Herkkyyden vastaanotto | > 97 dBm |
| Number of Storable Remotes | Jopa 20 |
| Koodauksen tuki | 1527 Learning-Code |
| RF-toimintatila | ASK Superheterodyne Wireless Reception |
| Vastaanottoalue | Approx. 20 ~ 50 meters (open area) |
| Toimintatilat | Momentary / Toggle / Latched Mode |
| Lähettimen akku | 2 x CR2016 (mukana) |
| Yhteensopivat laitteet | Garage door, electric curtain, electric gate, roller door |
4. Asennus
4.1 Turvaohjeet
- Ensure power is disconnected before any wiring.
- Wiring should be performed by a qualified electrician if you are unsure.
- Verify correct polarity (Live, Neutral) to avoid damage or short circuits.
4.2 Vastaanottimen johdotus
Connect the receiver to your AC motor and power supply according to the diagram below. The receiver supports AC 90V-250V input. Ensure secure connections for all wires.
Image: Receiver dimensions and wiring diagram. Note the 'Up' and 'Down' motor connections and AC 90-250V power input.
The receiver features large screw ports for easy installation and metal clips for secure wiring. A transparent flip cover allows for circuit adjustment.
Kuva: Yksityiskohtainen view of the receiver's screw terminals and cable compatibility.
4.3 Ensimmäinen käynnistys
After wiring, apply power to the receiver. The indicator light on the receiver will illuminate, indicating it is ready for operation or programming.
4.4 Tuote ohiview Video
Video: Tämä video tarjoaa visuaalisen kuvanview of the DieseRC 2201COM receiver and KT03 remote control, highlighting their design and features.
5. Toimintatilat
The DieseRC remote control switch supports three main operating modes: Momentary, Toggle, and Latched. All products are set to Toggle mode before shipment. If you wish to change the operating mode, you must first reset the receiver (see Section 6.2).
Image: Visual representation of Momentary, Toggle, Latched, and Delay operating modes.
5.1 Hetkellinen tila
- Paina ja pidä pohjassa "▲" button: The motor rotates forward.
- Release the button: The motor stops.
5.2 Vaihda tila
- Paina "▲" button once: The motor rotates forward.
- Paina "▲" button again: The motor stops.
5.3 Lukittu tila
- Paina "▲" button: The motor rotates forward.
- Paina "▼" button: The motor rotates backward.
- Paina "■" button: The motor stops.
5.4 Sovellus Esimamples
Kuva: esimample of the remote control switch used for a garage door.
Video: This video demonstrates various applications of the DieseRC Wireless Roller Shutter Remote Control Switch, showcasing its functionality in controlling different types of AC motors.
6. Kaukosäätimien ohjelmointi
The receiver can store up to 20 transmitters. Follow these steps to program your remote control to the desired operating mode.
Image: Step-by-step programming instructions for different modes.
6.1 Kaukosäätimen opettaminen
- Press the learning button on the receiver:
- Paina 1 kerta for Momentary Mode.
- Paina 2 kertaa for Toggle Mode.
- Paina 3 kertaa for Latched Mode.
- Paina "▲" button on your remote control. Wait 3 seconds.
- Paina "▼" button on your remote control. The programming is successful.
Note: For Latched Mode, the remote control requires 3 keys (Forward, Reverse, Stop).
6.2 Resetting the Receiver
To clear all programmed remote controls from the receiver's memory:
- Paina vastaanottimen oppimispainiketta 8 kertaa.
Important: After resetting, all previously programmed remote controls will no longer work and must be re-programmed.
6.3 Ohjelmoinnin demonstraatiovideo
Video: A step-by-step video guide on how to program the DieseRC 2201COM receiver, covering the different operating modes and remote control pairing.
7. Huolto
7.1 Lähettimen pariston vaihtaminen
The remote control transmitters use 2 x CR2016 batteries. If the remote's range decreases or it becomes unresponsive, replace the batteries. Refer to the transmitter image for visual guidance.
Image: DieseRC remote control transmitter.
7.2 Puhdistus
Wipe the receiver and transmitters with a dry, soft cloth. Do not use abrasive cleaners or solvents.
7.3 Ympäristöolosuhteet
Avoid exposing the device to extreme temperatures, high humidity, or direct sunlight. Ensure the receiver is installed in a location with adequate ventilation.
8. Vianmääritys
- Kaukosäädin ei vastaa:
- Check the battery in the transmitter. Replace if necessary.
- Ensure the receiver has power.
- If the receiver was recently reset, re-program the remote control (see Section 6.1).
- Ensure the remote is within the effective operating range (20-50 meters).
- Moottori ei liiku:
- Varmista, että kaikki johdotusliitännät ovat tukevasti kiinni ja oikein (katso kohta 4.2).
- Check the power supply to the receiver and motor.
- Varmista, että moottori itse toimii oikein.
- Häiriöt:
- While multiple remote control sets can be used in the same area without interference (except in Momentary mode), strong local RF interference might affect performance. Try relocating the receiver if possible.
9. Takuu ja tuki
DieseRC products are manufactured to high-quality standards. For specific warranty information, please refer to the product packaging or contact your retailer. If you encounter any issues or require technical assistance, please reach out to DieseRC customer support through the vendor's contact information provided at the point of purchase.