Johdanto
Thank you for choosing the SHALL 2-in-1 Cordless Electric Hedge Trimmer and Grass Shear. This versatile tool is designed for efficient and precise trimming of hedges, bushes, and grass edges in your garden. This manual provides essential information for safe operation, proper setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Tärkeitä turvallisuusohjeita
Always read and understand all safety warnings and instructions before operating this tool. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Henkilökohtainen turvallisuus: Always wear appropriate personal protective equipment, including safety glasses, gloves, and sturdy footwear. Keep children and bystanders away while operating the tool.
- Dual Safety Design: This tool features a two-way safety lock. To start the device, the safety key on the rear strap must be inserted, and the side lock must be engaged simultaneously. This design prevents accidental activation.
- Työalue: Ensure the work area is clear of obstacles, debris, and other people. Do not operate in wet conditions or near flammable liquids or gases.
- Akun hoito: Use only the specified charger and battery. Do not expose the battery to extreme temperatures or direct sunlight.
- Terän käsittely: Blades are sharp. Handle with extreme care. Always disconnect the battery before changing or cleaning blades.
- Huolto: Regularly inspect the tool for damage. Do not use if any part is damaged. Keep blades clean and sharp for best performance and safety.
Tuote loppuview
The SHALL 2-in-1 Cordless Electric Hedge Trimmer and Grass Shear is a compact and powerful tool designed for various garden tasks. It features interchangeable blades for grass shearing and hedge trimming, powered by a 7.2V Li-ion battery.
Tärkeimmät ominaisuudet:
- 2-in-1-toiminnallisuus: Easily switch between grass shearing and hedge trimming.
- Tehokas suorituskyky: Equipped with a 2000 mAh Li-ion battery and a motor providing 1100 RPM no-load speed for efficient cutting.
- Pikalataus: Fully charges in approximately one hour using the included Type-C cable.
- Ergonominen muotoilu: Lightweight (approximately 1.5 lbs / 0.68 kg) with an anti-slip rubber grip for comfortable extended use.
- Kääntyvä pää: The trimmer head can be rotated 180 degrees for precise cutting angles.
- Kestävät terät: High-quality alloy steel blades ensure sharpness and durability.
Asennus
1. Akun lataaminen
Before first use, fully charge the battery. The battery is integrated into the tool.
- Connect the Type-C cable to the charging socket on the tool.
- Liitä laturi tavalliseen pistorasiaan.
- The LED indicator will show the charging status. A full charge typically takes about one hour.
- Kun lataus on täynnä, irrota laturi.
2. Terien kiinnittäminen/vaihtaminen
The tool comes with two interchangeable blades: a grass shear blade and a hedge trimmer blade.
- Ensure the tool is OFF and the safety key is removed.
- Locate the blade quick-release button on the side of the tool.
- Press and hold the quick-release button.
- Carefully remove the currently attached blade by sliding it off.
- Align the desired blade (grass shear or hedge trimmer) with the slot on the tool.
- Slide the new blade into place until it clicks securely. Release the quick-release button.
- Gently pull on the blade to ensure it is firmly attached before use.
Käyttöohjeet
Always ensure the battery is sufficiently charged and the correct blade is installed for your task.
1. Activating the Tool (Dual Safety)
- Insert the safety key into its slot on the rear strap of the tool.
- Press and hold the side safety lock button.
- While holding the safety lock, press the ON/OFF trigger button to start the tool.
- Release the safety lock button once the tool is running. The tool will continue to operate as long as the ON/OFF trigger is pressed.
2. Ruohosaksen terän käyttö
The grass shear blade is ideal for trimming grass edges and small areas of lawn.
- Pidä työkalua tukevasti molemmilla käsillä, jos mahdollista, tai yhdellä kädellä, jos se on mukavaa ja turvallista.
- Position the grass shear blade parallel to the ground or desired cutting line.
- Move the tool steadily along the grass, allowing the blades to cut cleanly.
- Avoid forcing the tool through thick patches of grass to prevent stalling or damage.
3. Pensasleikkurin terän käyttö
The hedge trimmer blade is suitable for shaping small hedges and bushes.
- Pidä työkalusta tukevasti kiinni.
- For optimal results, use a sweeping motion, cutting small amounts of material at a time.
- The trimmer head can be rotated 180 degrees to adjust the cutting angle for different hedge shapes and accessibility. To rotate, ensure the tool is off, then gently twist the blade assembly.
- Do not attempt to cut branches thicker than the maximum cutting thickness (approximately 7.95mm).
Huolto
Regular maintenance ensures the longevity and safe operation of your SHALL 2-in-1 tool.
- Puhdistusterät: After each use, ensure the tool is OFF and the battery is disconnected. Carefully clean the blades with a brush to remove sap, grass, and debris. A damp cloth can be used for the tool body.
- Voitelu: Apply a light machine oil or blade lubricant to the blades periodically to reduce friction and prevent rust.
- Varastointi: Store the tool in a dry, secure place, out of reach of children. Ensure the blades are clean and dry before storage.
- Akun säilytys: If storing for extended periods, charge the battery to approximately 50% and store in a cool, dry place. Recharge every 3-6 months to maintain battery health.
Vianetsintä
Jos työkalussasi ilmenee ongelmia, katso seuraavat yleiset ongelmat ja ratkaisut:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Työkalu ei käynnisty | Akkua ei ole ladattu Turva-avainta ei ole asetettu Turvalukko ei ole lukittunut oikein | Lataa akku Työnnä turva-avain kokonaan sisään Ensure both safety lock and trigger are pressed simultaneously |
| Terät eivät leikkaa tehokkaasti | Terät ovat tylsiä tai likaisia Leikattava materiaali on liian paksua | Clean and lubricate blades; consider sharpening or replacing if very dull Do not attempt to cut material exceeding maximum thickness |
| Työkalu pysähtyy käytön aikana | Akku on vähissä Ylikuormitussuoja aktivoitu | Lataa akku uudelleen Reduce the load on the blades; clear any jammed material |
Jos ongelma jatkuu näiden ratkaisujen kokeilemisen jälkeen, ota yhteyttä asiakastukeen.
Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Merkki | Tulee |
| Malli | SH112015EU |
| Virtalähde | Paristokäyttöinen |
| Akun tyyppi | 7.2 V 2000 mAh Li-ion |
| Nopeus ilman kuormaa | 1100 RPM |
| Ruohosaksen leikkuuleveys | 82 mm (3.2 tuumaa) |
| Hedge Trimmer Cutting Area | 140 x 60 mm (5.5 x 2.4 tuumaa) |
| Max Hedge Trimmer Cutting Thickness | 42 mm (1.65 inches) / 7.95 mm (0.31 inches) for branches |
| Terän materiaali | Seosteräs |
| Tuotteen mitat (P x L x K) | 28P x 12L x 9K cm (11P x 4.7L x 3.5K tuumaa) |
| Tuotteen paino | Approx. 0.68 kg (1.5 lbs) - tool only |
| Latausaika | Noin 1 tunti |
| Runtime (full charge) | Noin 100 minuuttia |
Takuu ja tuki
SHALL products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official SHALL website. If you have any questions, require technical assistance, or need to report a defect, please contact SHALL customer support through the retailer where you purchased the product or directly via the manufacturer's contact channels.
Säilytä ostokuitti takuuvaatimuksia varten.