ARPHA D280W-H300 Avaimeton ovi, salpa ja kahvasarja, käyttöohje

Johdanto

This manual provides detailed instructions for the installation, setup, and operation of your ARPHA D280W-H300 Keyless Entry Door Deadbolt with Handle Set. This smart lock offers multiple unlocking methods including fingerprint, passcode, mobile app control, and traditional key access, enhancing convenience and security for your home.

Kuva: Yliview of the ARPHA D280W-H300 smart lock components and app interface.

Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

• Exterior Keypad Unit
• Sisäyksikkö
• Door Handle Set (Lever handles and escutcheons)
• Kuollut salpa
• Asennuslevy
• Kiinnitysruuvit (eri kokoisia)
• Lakkolevy
• Fyysiset avaimet
• Asennusmalli

Asennus

1. Asennus

Follow these steps to physically install the lock on your door. Ensure your door thickness is between 1-3/8" to 2-1/8" (35mm - 55mm) and the backset is 2-3/8" (60mm) or 2-3/4" (70mm).

Image: Door and lock dimensions for compatibility check.

1. Valmista ovi: Use the provided template to mark and drill holes if necessary.
2. Asenna salpa: Insert the deadbolt latch into the door edge. Ensure the word "UP" on the deadbolt faces upwards. Secure with two 25mm screws.
3. Ulkoisen näppäimistön asentaminen: Pass the connection wire through the bottom-right hole of the mounting plate. Align the protruding position of the latch with the concave position of the lock body and insert the exterior keypad.
4. Asenna asennuslevy: Secure the mounting plate to the door using two screws, ensuring the wire passes through the correct opening.
5. Connect Interior Unit: Connect the power and communication cables from the exterior unit to the interior unit.
6. Sisäyksikön kiinnitys: Attach the interior unit to the mounting plate, ensuring all wires are tucked away. Secure with screws.
7. Asenna paristot: Insert 8 AA batteries into the interior unit. The lock will automatically identify the unlocking direction.

2. Initial Setup (Administrator & User Management)

After installation, set up the administrator password and add user credentials.

1. Aseta järjestelmänvalvojan salasana: Briefly press the setup button (located on the interior unit, under the battery cover). Enter a 6-9 digit password twice, then press the unlock button to confirm.
2. Add User Passwords: Briefly press the setup button, enter the administrator password, and press the unlock button. Then, press '1' to add a password. Enter a 6-9 digit password twice, then press the unlock button to confirm.
3. Add User Fingerprints: Briefly press the setup button, enter the administrator password, and press the unlock button. Then, press '2' to add a fingerprint. Place your finger on the sensor four times as prompted.

3. App Pairing & Network Configuration

The ARPHA D280W-H300 supports Wi-Fi connectivity for remote control via a mobile application. Ensure your Wi-Fi network is 2.4G.

1. Lataa sovellus: Etsi the ARPHA app in your device's app store.
2. Aloita pariliitos: Briefly press the setup button, enter the administrator password, and press the unlock button. Then, press '5' to enter network allocation mode.
3. Pair Device in App: Open the ARPHA app, ensure Bluetooth is enabled. The app should automatically detect the lock. Follow the on-screen prompts to add the device and enter your 2.4G Wi-Fi credentials.

Toiminnassa

Avausmenetelmät

Your ARPHA smart lock offers five ways to unlock:

• Sormenjälki: Aseta rekisteröity sormesi sormenjälkitunnistimelle. Lukko avautuu noin 0.3 sekunnissa.
• Pääsykoodi: Enter your registered 6-9 digit passcode on the keypad, then press the unlock button.
• Mobiilisovellus: Use the ARPHA app to remotely unlock the door.
• Ääniohjaus (Alexa): If integrated with Alexa, use voice commands to unlock.
• Fyysinen avain: Hätätilanteessa tai akun tyhjentyessä käytä laitteen mukana toimitettua fyysistä avainta.

Image: Visual representation of the multiple unlocking options available.

Lisäominaisuudet

• Automaattinen lukitus: The lock can be configured to automatically lock after a set period. To adjust this setting, briefly press the setup button, enter the administrator password, press the unlock button, then press '4' for settings, and '1' for auto-lock. You can set the auto-lock delay from 5 to 900 seconds.

Video: Guide on how to enable and configure the auto-lock feature.
• Peep-suojauskoodi: To prevent others from observing your passcode, you can enter random digits before or after your actual passcode. The lock will still recognize the correct sequence.


Image: Explanation of the anti-peep passcode function.

• Väliaikaiset salasanat: Generate temporary passwords via the mobile app for guests or service providers.


Kuva: esimample of using a temporary password for access.

• Äänenvoimakkuuden säätö: Adjust the voice prompt volume. Briefly press the setup button, enter the administrator password, press the unlock button, then press '4' for settings, and '2' for voice prompt volume. Choose from silent (1), low (2), medium (3), or high (4).

Video: Instructions for adjusting the volume of the lock's voice prompts.

Huolto

Akun vaihto

The lock uses 8 AA batteries. When the battery level is low, you will receive a reminder. Replace all 8 batteries promptly to ensure continuous operation.

Image: Battery compartment and emergency USB-C port.

• Varavoima: If batteries deplete completely, you can use a USB-C power bank to temporarily power the lock via the hidden USB-C port on the exterior unit.

Vianetsintä

• Sovellusten yhteysongelmat: Ensure your phone's Bluetooth is on and your Wi-Fi network is 2.4G. If issues persist, try re-pairing the device as described in the "App Pairing & Network Configuration" section.
• Forgotten Administrator Password: If you forget the administrator password, you can perform a factory reset. Briefly press the setup button for 7 seconds, then press the unlock button to confirm. This will reset all settings and user data.

Video: Instructions for performing a factory reset on the smart lock.

• Verification Failed (Password/Fingerprint): Ensure you are entering the correct password or placing your finger correctly on the sensor. If the administrator password needs to be changed, follow the modification steps.

Video: Guide on how to modify the administrator password.
• Alhaisen akun varoitus: Replace batteries immediately when a low battery alert is received. Use the USB-C port for emergency power if needed.

Tekniset tiedot

Takuu ja tuki

ARPHA is committed to providing high-quality products and excellent customer service.

• Takuu: Tällä tuotteella on 3 vuoden takuu.
• Asiakaspalvelu: For any questions or assistance, contact our 7x24 online customer service. Our professional after-sales team aims to respond within 2 hours.