1. Johdanto
Thank you for choosing the VOLT Stemless Directional Brass Path Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new low voltage landscape lighting fixture. This path light is designed for outdoor use, providing widespread illumination for pathways, walkways, gardens, driveways, and patios.
Image: The VOLT Stemless Directional Brass Path Light installed along a pathway, providing warm illumination.
2. Turvallisuustiedot
Lue kaikki ohjeet huolellisesti ennen asennusta ja käyttöä. Näiden ohjeiden noudattamatta jättäminen voi aiheuttaa sähköiskun, tulipalon tai muita vaaroja. Säilytä tämä käyttöohje myöhempää tarvetta varten.
- This product is intended for use with a 12V low voltage landscape lighting system. A low voltage transformer (not included) is required for operation.
- Do not connect directly to 120V household current.
- Ensure power is disconnected at the transformer before installing or servicing the fixture.
- All electrical connections must comply with local codes and ordinances. If you are unsure about installation, consult a qualified electrician.
- Do not operate the fixture with a damaged cord or if the lens is cracked.
- Pidä lapset ja lemmikit poissa asennusalueelta.
- This fixture is designed for outdoor use and is water-resistant. However, avoid submerging the fixture in water.
3. Mitä laatikossa on
Paketti sisältää seuraavat komponentit:
- VOLT Stemless Directional Brass Path Light
- 9-inch Ground Stake
- Mounting Hardware (for surface mounting)
Huomautus: A G4 LED bi-pin bulb and a low voltagMuuntajat myydään erikseen ja ne vaaditaan täyden toiminnallisuuden saavuttamiseksi.
4. Ominaisuudet
- Low Profile Design: Standing 1.96 inches tall with a 2.71-inch diameter, this light minimizes obstruction and risk of damage.
- Ammattitason rakentaminen: Made from solid cast brass with a bronze finish and a heavy frosted acrylic lens for durability.
- Lamp Valmis: Designed for use with a G4 LED bi-pin bulb (not included) rated up to 20W, providing 140 degrees of light output.
- Monipuolinen asennus: Includes a 9-inch ground stake for landscape installation and hardware for surface mounting.
- Korroosionkestävyys: Features a beryllium copper socket for enhanced corrosion resistance.
- Moisture-Tightness: Machine-threaded body screws onto an O-ring for a secure, moisture-tight seal.
- UL/cUL listattu: Varmistaa turvallisuusstandardien noudattamisen.
5. Tekniset tiedot
| Attribuutti | Yksityiskohta |
|---|---|
| Merkki | VOLT |
| Mallin nimi | VOLT Stemless Directional Brass Path Light |
| Mallinumero | BDL-VPL-1053-4-BBZ-ZON |
| Väri | Pronssi |
| Materiaali | Messinki, metalli |
| Tuotteen mitat | 2.71 cm P x 2.71 cm L x 1.96 cm K |
| Valaisinmuoto | Polku |
| Virtalähde | Johdollinen sähkökäyttöinen (pieni tilavuus)tage) |
| Voitage | 12 volttia (AC) |
| Valonlähteen tyyppi | LED (G4 Bi-pin bulb, not included) |
| Polttimopohja | G4 |
| Max Wattage | 20W (for G4 LED bi-pin bulb) |
| Asennustyyppi | Surface Mount, Ground Stake |
| Sisä-/ulkokäyttö | Ulkona |
| Vedenkestävyystaso | Vedenkestävä |
| Sertifikaatit | UL/cUL Listattu |
6. Asennus
Before beginning installation, ensure the power to your low voltage transformer is turned OFF.
6.1. Polttimon asennus
- Carefully remove the top cap of the path light by unscrewing it.
- Insert a G4 LED bi-pin bulb (sold separately) into the beryllium copper socket. Ensure the pins are fully seated.
- Replace the top cap, screwing it firmly to ensure a moisture-tight seal.
Kuva: Lähikuva view of the VOLT Stemless Directional Brass Path Light, showing its compact design.
6.2. Asennusvaihtoehdot
The VOLT Stemless Directional Brass Path Light offers two primary mounting methods:
6.2.1. Ground Stake Installation
- Thread the path light onto the included 9-inch PVC ground stake.
- Select a desired location in your landscape. Ensure the location allows for proper drainage and is clear of underground utilities.
- Push the ground stake firmly into the soil until the path light is at the desired height and stable. For hard soil, pre-dig a small pilot hole.
- Reititä alhainen tilavuustage wire from the path light to your low voltage transformer, ensuring the wire is protected from damage.
6.2.2. Pinta-asennus
- Identify the desired surface for mounting (e.g., deck, patio edge).
- Use the provided mounting hardware to secure the base of the path light to the surface. Pre-drill pilot holes if necessary.
- Ensure the fixture is securely fastened and stable.
- Reititä alhainen tilavuustage wire from the path light to your low voltage transformer, ensuring the wire is protected from damage.
6.3. Wiring to Transformer
- Kytke matala voltage wire from the path light to the common and 12V terminals on your low voltage muuntaja.
- Varmista, että kaikki liitännät ovat tiukat ja tukevat.
- Once all fixtures are installed and wired, turn on the power at the transformer.
Video: Tämä video tarjoaa yleiskuvanview of the VOLT Stemless Brass Bronze Directional Path Light, highlighting its features and demonstrating mounting options. It shows how to attach the light to a ground stake and how to prepare it for surface mounting.
7. Käyttöohjeet
The VOLT Stemless Directional Brass Path Light operates as part of a low voltage landscape lighting system controlled by a transformer. There are no direct controls on the fixture itself.
- Once properly installed and connected to a low voltage transformer, the light will turn on and off according to the transformer's settings (e.g., timer, photocell).
- Ensure the transformer is set to the desired operating schedule.
8. Huolto
Regular maintenance will help ensure the longevity and optimal performance of your path light.
- Puhdistus: Periodically clean the fixture and lens with a soft, damp cloth to remove dirt, debris, and mineral deposits. Do not use abrasive cleaners.
- Polttimon vaihto: If the bulb burns out, ensure the power to the transformer is off before replacing the G4 LED bi-pin bulb. Follow the bulb installation steps in Section 6.1.
- Johdon tarkastus: Annually inspect wiring for any signs of damage, fraying, or loose connections. Repair or replace as needed.
- Kiinnikkeen vakaus: Check that the fixture remains securely mounted, whether on a ground stake or surface. Re-secure if loose.
9. Vianmääritys
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Valo ei syty | Ei virtaa muuntajalle Löysä johtoliitäntä Viallinen polttimo Transformer timer/photocell setting | Check power supply to transformer Inspect and tighten all wire connections Vaihda polttimo Adjust transformer settings |
| Valo välkkyy | Irrallinen polttimo Löysä johtoliitäntä Yhteensopimaton polttimo | Varmista, että lamppu on kokonaan paikallaan Inspect and tighten all wire connections Ensure G4 LED bi-pin bulb is compatible with 12V AC systems |
| Valo on hämärää | Alhainen tilavuustage muuntajasta Likainen linssi Polttimo wattiatage liian alhainen | Tarkista muuntajan lähtöjännitetage Puhdista linssi Vaihda tilalle korkeampi wattitage G4 LED bi-pin bulb (up to 20W) |
10. Takuu ja tuki
The VOLT Stemless Directional Brass Path Light is backed by a Elinikäinen takuu. Tämä takuu kattaa materiaali- ja valmistusvirheet normaalikäytössä.
For warranty claims, technical assistance, or any questions regarding your product, please contact VOLT Lighting customer support. Refer to the official VOLT Lighting webKatso ajantasaiset yhteystiedot verkkosivustolta tai ostodokumentaatiostasi.
Valmistaja: VOLT-valaistus
UPC: 842032134007