AVID POWER ACAP110D-Y Battery and Charger

AVID POWER 20V Battery for ACAP110D-Y Bundle with AC Charger User Manual

Model: ACAP110D-Y Battery and Charger

Tärkeitä turvallisuusohjeita

Read all safety warnings and instructions before using the battery and charger. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

  • Always use the battery with compatible AVID POWER tools, specifically the ACAP110D-Y tire inflator.
  • Älä lataa akkua kohdassa damp tai kosteissa olosuhteissa.
  • Älä säilytä akkua paikoissa, joissa lämpötila voi ylittää 40 °C.
  • Älä polta akkua, vaikka se olisi pahasti vaurioitunut tai täysin tyhjä. Akku voi räjähtää tulessa.
  • Älä oikosulje akun napoja.
  • Älä pura akkua.
  • Use only the specified charger for this battery. Using any other charger may create a risk of fire.
  • Pidä akku ja laturi poissa lasten ulottuvilta.
  • Jos akkunestettä joutuu iholle, pese välittömästi saippualla ja vedellä. Jos ainetta joutuu silmiin, huuhtele vedellä vähintään 15 minuuttia ja hakeudu lääkärin hoitoon.

Tuote loppuview

The AVID POWER 20V 1.5Ah Li-ion battery and its accompanying charger are designed to power the ACAP110D-Y cordless tire inflator. The battery features an LED indicator for real-time capacity and charging status, along with multiple built-in protection systems.

AVID POWER 20V 1.5Ah Li-ion Battery

Figure 1: AVID POWER 20V 1.5Ah Li-ion Battery. Note the "20V MAX LI-ION" label and the "Recharge every 3 months" warning.

Akun komponentit

Details of the AVID POWER 20V Battery components

Kuva 2: Yksityiskohtainen view of the battery showing the Latch, Connector, and Charging Port with LED Indicator lights.

  • Salpa: Used to secure the battery to the tool or charger and release it.
  • Liitin: Electrical contacts for power transfer.
  • Latausportti ja merkkivalo: Port for the charger plug and LED lights to show battery status.

Built-in Protection Systems

Räjähtänyt view of battery showing internal protection features

Kuva 3: Sisäinen view of the battery highlighting its multiple protection features.

  • Ylilataussuoja: Estää akun latautumisen yli sen kapasiteetin.
  • Ylikuumenemissuoja: Valvoo akun lämpötilaa estääkseen liiallisen kuumuuden aiheuttamat vauriot.
  • Ylipurkaussuojaus: Estää akun täydellisen tyhjenemisen ja pidentää sen käyttöikää.
  • Ylivirtasuojaus: Suojaa liiallista virrankulkua vastaan.
  • Yli-voltage Suojaus: Suojaa volyymiltätage piikkejä.
  • Oikosulkusuojaus: Estää oikosulkujen aiheuttamat vauriot.

Yhteensopivuus

This AVID POWER 20V 1.5Ah Li-ion battery and its charger are exclusively compatible with the AVID POWER 20V cordless Yellow ACAP110D-Y Tire Inflator.

It is NOT compatible with other AVID POWER battery-powered tools such as other tire inflators, cordless drill/drivers, cordless blowers, or power saws. Using this battery or charger with incompatible tools may cause damage to the tool, battery, or charger, and could lead to personal injury.

AVID POWER 20V Battery shown with compatible ACAP110D-Y Tire Inflator

Figure 4: The 20V rechargeable battery pack shown with the compatible AVID POWER ACAP110D-Y Tire Inflator.

Asennus ja lataus

Before first use, or after extended storage, fully charge the battery.

  1. Liitä laturi: Kytke laturi tavalliseen 120 V:n vaihtovirtapistorasiaan.
  2. Connect Battery to Charger: Insert the charger's output plug into the charging port on the battery pack. Ensure a secure connection.
  3. Latausilmaisin: The LED indicator lights on the battery will illuminate to show the charging status. A full charge typically takes 3-5 hours.
  4. Poista akku: Once fully charged, disconnect the charger from the battery and then from the power outlet.
AVID POWER 20V Battery connected to charger and wall outlet

Figure 5: The AVID POWER 20V battery connected to its charger, which is plugged into a wall outlet, indicating the charging process.

AVID POWER 20V Charger with protection icons

Figure 6: The AVID POWER 20V charger, featuring over-current, over-voltage ja oikosulkusuojaus.

Note: The charger is included in this bundle.

Akun käyttö

  1. Attaching to Tool: Align the battery pack with the base of the compatible AVID POWER ACAP110D-Y tire inflator. Slide the battery onto the tool until it clicks securely into place.
  2. Irrottaminen työkalusta: To remove the battery, press the latch button(s) on the battery pack and slide the battery off the tool.
  3. Akun kapasiteetin tarkistaminen: The LED indicator lights on the battery show the real-time capacity.
    • Three lights: Full charge
    • Kaksi valoa: Keskitasoinen lataus
    • Yksi valo: Varaus vähissä, lataa pian
    • No lights: Battery depleted, recharge immediately

Huolto ja varastointi

  • Säännöllinen lataus: Akun käyttöiän pidentämiseksi lataa akku täyteen jokaisen käyttökerran jälkeen.
  • Pitkäaikaissäilytys: If storing the battery for an extended period, ensure it is fully charged every three months.
  • Säilytysolosuhteet: Avoid storing batteries in cold places as low temperatures may cause them to fail. Store in a dry place, away from direct sunlight and extreme temperatures.
  • Puhdistus: Keep the battery terminals clean and free of debris. Use a dry cloth to wipe the battery and charger.

Vianetsintä

OngelmaMahdollinen syyRatkaisu
Akku ei lataudu
  • Laturia ei ole liitetty kunnolla.
  • Virtapistoke ei ole aktiivinen.
  • Akku tai laturi on vaurioitunut.
  • Akun lämpötila on liian korkea tai liian matala.
  • Ensure charger is securely plugged into battery and outlet.
  • Testaa pistorasiaa toisella laitteella.
  • Inspect battery and charger for visible damage. Do not use if damaged.
  • Anna akun lämmetä huoneenlämpöiseksi ennen lataamista.
Akku ei käynnistä työkalua
  • Akkua ei ole ladattu täyteen.
  • Battery is not securely attached to the tool.
  • Battery or tool is incompatible.
  • Lataa akku täyteen.
  • Ensure battery is clicked into place on the tool.
  • Verify that the battery is the correct model for the ACAP110D-Y tire inflator.

Tekniset tiedot

OminaisuusYksityiskohta
Akun tyyppiLitium-ioni (Li-ion)
Voitage20 V MAX
Kapasiteetti1.5 Ah
LatausaikaApproximately 3-5 hours (with included charger)
YhteensopivuusAVID POWER ACAP110D-Y Tire Inflator ONLY

Mitat

Dimensions of the AVID POWER 20V Battery

Figure 7: Battery Dimensions (approx. 4.72in L x 2.95in W x 1.73in H).

Dimensions of the AVID POWER 20V Charger

Figure 8: Charger Dimensions (approx. 2.36in H x 1.89in W x 1.50in D, with 5.97ft cord).

Takuu ja tuki

Specific warranty information for this product is not provided in the available documentation. For warranty details, technical support, or service inquiries, please refer to the official AVID POWER websivustolta tai ota yhteyttä suoraan heidän asiakaspalveluunsa.

Säilytä ostokuittisi ostotodistuksena mahdollisten takuuvaatimusten varalta.

© 2023 AVID POWER. Kaikki oikeudet pidätetään.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.