Biling Solar Drip Irrigation System (Model FJH25J-35) Instruction Manual

Johdanto

The Biling Solar Drip Irrigation System is designed to provide automatic watering for your plants, especially suitable for balconies, gardens, and greenhouses. This system utilizes solar power to operate, featuring a 2200 mAh battery for continuous operation. It can efficiently water 15 to 20 potted plants, saving up to 80% water compared to traditional methods. This manual provides detailed instructions for the proper installation, operation, and maintenance of your irrigation system.

Turvallisuustiedot

• Ensure the solar panel is installed in a location that receives optimal sunlight for efficient charging.
• Always place the controller unit above the water source to prevent siphoning and ensure proper pump function.
• Before inserting T-connectors and drippers, dip the end of the hose in warm water for approximately 1 minute to soften it, making insertion easier and preventing damage.
• Regularly check the water reservoir to ensure it does not run dry, as this can damage the pump.
• Keep the system components away from extreme temperatures and direct physical impact.

Pakkauksen sisältö

Varmista, että pakkauksessasi on kaikki alla luetellut osat:

• Aurinkopaneeli (x1)
• Ohjain (x1)
• Drippers (x15)
• Maapanos (x1)
• Water Hose 15M (50FT) (x1)
• T-Connectors (x15)
• Ruuvit (x2)
• Suodatin (x1)
• Anti-siphon Device (x1)

Tuotteen ominaisuudet

The Biling Solar Drip Irrigation System offers several key features for efficient and convenient plant watering:

• Solar-Powered Automatic Watering: Utilizes a 3.5W solar panel to power the system and charge the internal battery.
• Integrated 2200 mAh Battery: Provides up to 27 days of operation on a full charge, ensuring watering even on cloudy days or at night.
• IP67 vedenpitävyysluokitus: Ensures durability and reliability in outdoor conditions.
• Mukautettavat kasteluaikataulut: Set watering duration from 1 to 30 minutes and intervals from 3 hours to 7 days.
• Vettä säästävä suunnittelu: Delivers water directly to plant roots at approximately 400 ml/min, reducing water waste by up to 80%.
• Automatic Water Shortage Hälytys: Notifies you when the water source is low.
• Supports up to 15-20 Potted Plants: Sufficient capacity for a typical balcony or small garden setup.

Asennusohjeet

Follow these steps to set up your Biling Solar Drip Irrigation System:

1. Valmistele letku: Dip the end of the water hose in warm water for about 1 minute. This will soften the hose, making it easier to insert the T-connectors and drippers.
2. Liitä suodatin: Attach the filter to the inlet port of the controller. Place the filtered end into your water reservoir (e.g., a bucket or tank).
3. Ohjaimen sijoittaminen: Mount the controller unit in a suitable location, ensuring it is positioned higher than your water source. This is crucial to prevent siphoning and ensure the pump functions correctly.
4. Asenna aurinkopaneeli: Connect the solar panel to the controller. Place the solar panel in a sunny spot where it can receive maximum direct sunlight throughout the day for optimal charging. Use the provided ground stake if installing in soil.
5. Route the Hose and Install Drippers: Connect the 15-meter water hose to the outlet port of the controller. Route the hose to your plants. Cut the hose at appropriate points and insert T-connectors. Attach drippers to the T-connectors and place them near the base of each plant.
6. Consider Plant Water Needs: Plants with higher water requirements should be placed closer to the controller unit, while plants needing less water can be positioned further along the hose line.
7. Suojatut yhteydet: Ensure all hose connections, T-connectors, and drippers are securely fitted to prevent leaks.

Käyttöohjeet

Ohjain ohiview

The controller unit features a digital display and several buttons for easy programming:

• 1. Interval Time: Displays the set watering interval.
• 2. Watering Time: Displays the set watering duration.
• 3. '+': Press to increase numbers or cycle through options.
• 4. SET: Press to switch between setting interval time and watering time. Press and hold for 3 seconds to turn the device On/Off.
• 5. Tuotos: Water outlet port.
• 6. In: Water inlet port.
• 7. Water Sensor Cable: Port for the water level sensor.
• 8. Solar Panel Cable: Port for the solar panel connection.

Setting Watering Modes

To program your watering schedule:

1. Laita päälle: Paina ja pidä painettuna SARJA painiketta 3 sekunnin ajan käynnistääksesi laitteen.
2. Aseta kastelun kesto: Paina SARJA button once to select the watering duration setting. The display will show the current duration. Use the + button to adjust the watering time (e.g., 01, 02, ..., 30 minutes).
3. Set Watering Interval: Paina SARJA button again to select the watering interval setting. The display will show the current interval. Use the + button to adjust the interval (e.g., 3, 6, 8, 12, 18 hours, 1, 2, ..., 7 days).
4. Vahvista asetukset: The system will automatically save your settings after a few seconds of inactivity.
5. Start Watering: The system will begin watering according to your programmed schedule.

The watering flow rate is approximately 400 ml/min. Adjust the number of drippers and the watering interval based on the specific water needs of your plants.

Huolto

Regular maintenance ensures the longevity and optimal performance of your irrigation system:

• Puhdista suodatin: Periodically check and clean the water inlet filter to prevent blockages and ensure consistent water flow.
• Inspect Drippers: Check drippers for any clogs from dirt or mineral deposits. Clean them as needed to maintain even water distribution.
• Tarkista letkut ja liitännät: Regularly inspect hoses for kinks, cracks, or leaks. Ensure all connections are secure.
• Monitor Water Source: Ensure the water reservoir is clean and free of debris that could enter the system.
• Aurinkopaneelien puhdistus: Keep the solar panel clean from dust and dirt to maximize charging efficiency. Wipe it gently with a soft, damp kangas.
• Talvisäilytys: In colder climates, drain the system completely and store components indoors to prevent freezing damage.

Vianetsintä

If you encounter issues with your Biling Solar Drip Irrigation System, refer to the following table for common problems and solutions:

Tekniset tiedot

Takuu ja tuki

Biling products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or contact Biling customer service through their official websivustolta tai jälleenmyyjältä, jolta tuote on ostettu. Säilytä ostokuitti takuuvaatimuksia varten.