Philips ICN-2S28-N Centium Electronic Ballast Instruction Manual

1. Johdanto

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Philips ICN-2S28-N Centium Electronic Ballast. This ballast is designed for use with two F28T5, F21T5, or F14T5 fluorescent lamps, and can also operate single lamps. Please read this manual thoroughly before installation and retain it for future reference.

2. Turvallisuustiedot

VAROITUS: Risk of electric shock. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes. Disconnect power at the circuit breaker before installation or servicing.

• Varmista virtalähteen voltage matches the ballast's rated voltage (120V tai 277V).
• The ballast case must be properly grounded.
• Mount lamps within 1/4 inch of a grounded metal reflector.
• Suurin tilavuustage for RED-BLUE leads is 500 Vrms.
• Insulate YELLOW leads for 600V.
• Only use rapid-start sockets with this ballast.
• Do not modify the ballast or its wiring.
• This ballast is a Semi-Conducteur, High Power Factor, Class P, Sound Rated A, Type 1 Outdoor, with Inherent Thermal Protection. It contains no PCB's.

3. Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

• 1 x Philips ICN-2S28-N Centium Electronic Ballast

Image 1: Philips ICN-2S28-N Centium Electronic Ballast with its integrated wiring.

4. Asennus ja käyttöönotto

Asenna liitäntälaite oikein noudattamalla näitä ohjeita:

1. Katkaise virta: Before starting any work, ensure the main power supply to the fixture is turned off at the circuit breaker.
2. Mount the Ballast: Securely mount the Philips ICN-2S28-N ballast within the fixture. Ensure the ballast case is grounded.
3. Johdotusliitännät: Refer to the wiring diagram on the ballast label and the instructions below.

Kuva 2: Yksityiskohtainen view of the ballast label, including wiring diagram and technical specifications.

Kytkentäkaavion tiedot:

• Input Power (120V or 277V):
  • Yhdistä MUSTA johdin Line (L) -tuloon.
  • Yhdistä VALKOINEN johdin nollajohtimen (N) tuloon.
• Lamp Connections (for 2 Lamps):
  • Yhdistä SININEN wires to one end of each lamp.
  • Yhdistä PUNAINEN wires to the other end of each lamp.
  • Yhdistä KELTAINEN wires to the remaining terminals of the lamps.
• Maadoitus: Ensure the ballast case is properly grounded to the fixture's metal housing.

Tärkeitä huomautuksia:

• This ballast is compatible with (2) F28T5, (2) F21T5, and (2) F14T5 lamps. It also works for single lamps.
• Mount lamps within 1/4 inch of a grounded metal reflector for optimal performance and safety.
• Insulate any unused YELLOW leads for 600V.
• Only use rapid-start sockets.

Image 3: The ballast with its color-coded wires clearly visible for connection.

5. Käyttö

Once the Philips ICN-2S28-N Centium Electronic Ballast is correctly installed and wired, operation is straightforward:

1. After completing the installation, restore power to the circuit at the breaker.
2. Turn on the light switch connected to the fixture. The ballast will automatically ignite and regulate the power to the fluorescent lamps.
3. The ballast is designed for programmed start, ensuring optimal lamp elämää.

6. Huolto

The Philips ICN-2S28-N Centium Electronic Ballast is designed for long-term, reliable operation with minimal maintenance. However, periodic checks can help ensure continued performance:

• Virran katkaisu: Katkaise aina virta ennen minkään huollon tai tarkastuksen suorittamista.
• Puhdistus: Keep the ballast and fixture free from dust and debris to ensure proper heat dissipation. Use a dry, soft cloth for cleaning.
• Johdon tarkastus: Periodically inspect wiring connections for any signs of wear, fraying, or loose connections. Ensure all connections remain secure.
• Lamp Korvaus: Kun vaihdat lamps, ensure they are of the correct type and wattage as specified for this ballast (F28T5, F21T5, F14T5).
• Ympäristöolosuhteet: Ensure the ballast operates within its specified temperature range and environmental conditions (Type 1 Outdoor).

7. Vianmääritys

If your fluorescent fixture is not operating correctly, consult the following troubleshooting guide:

Jos vianmääritysohjeet eivät ratkaise ongelmaa, ota yhteyttä pätevään sähköasentajaan tai Philipsin asiakastukeen.

8. Tekniset tiedot

Below are the technical specifications for the Philips ICN-2S28-N Centium Electronic Ballast:

• Mallinumero: ICN-2S28-N
• Merkki: PHILIPS (Advance Ballast)
• Tulo Voltage: 120 V / 277 V
• Yhteensopiva Lamps: (2) F28T5, (2) F21T5, (2) F14T5 (also works for single lamps)
• Wattage: 28 watts (for F28T5 lamps)
• Valonlähteen tyyppi: Fluoresoiva
• Virtalähde: Johdollinen sähkö
• Materiaali: Muovi
• Väri: Musta
• Muoto: Suorakulmainen
• Viimeistelytyyppi: Musta
• Asennustyyppi: Rack Mount
• Tuotteen paino: 9.6 unssia
• Tuotteen mitat (P x L x K): 9.5 cm x 1.25 cm x 1 cm
• UPC: 781087080726
• Sertifikaatit: UL Listed 704G, CSA (NRTL/C)
• Ominaisuudet: IntelliVolt (120V to 277V 50/60Hz), Programmed Start, High Power Factor, Class P, Sound Rated A, Type 1 Outdoor, Inherent Thermal Protection, No PCB's.

Kuva 4: Sivu view of the ballast, illustrating its compact dimensions and mounting points.

9. Takuu ja tuki

This Philips ICN-2S28-N Centium Electronic Ballast comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Philips customer support.

For technical assistance or support, please contact Philips directly. Technical information is often available via their official websivustolle tai soittamalla heidän tukinumeroonsa.

• Valmistaja: Advance Ballast (a Philips company)
• Tekniset tiedot: 1.800.372.3331 (as seen on product label)
• Online-tuki: Käy Philipsin virallisella sivustolla website for product support and resources.