1. Johdanto
Thank you for choosing the pamo Industrial Design LAS 1 Standard Garment Rack. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your new garment rack. Please read these instructions carefully before assembly and retain them for future reference.
Figure 1.1: The pamo Industrial Design LAS 1 Standard Garment Rack, fully assembled and in use.
2. Turvallisuustiedot
- Varmista, että kaikki osat ovat mukana ja vahingoittumattomia ennen kokoamisen aloittamista. Älä käytä laitetta, jos jokin osa puuttuu tai on rikki.
- Assemble the garment rack on a soft, clean surface to prevent scratches.
- Älä ylitä suurinta sallittua kuormaa, joka on 60 kg. Ylikuormitus voi aiheuttaa epävakautta ja vaurioita.
- This product is designed for freestanding use. While stable, avoid climbing on or hanging from the rack.
- Pidä pienet osat poissa lasten ulottuvilta kokoamisen aikana tukehtumisvaaran välttämiseksi.
- Tarkista säännöllisesti kaikki liitännät varmistaaksesi, että ne pysyvät tiukasti kiinni.
3. Pakkauksen sisältö
Verify that all the following components are included in your package. If any parts are missing, please contact customer support.
Figure 3.1: Illustration of typical components included in the package.
- Vertical Pipes (various lengths)
- Horizontal Pipes (various lengths)
- T-liittimet
- Kyynärpään liittimet
- Floor Flanges / Feet
- Non-slip Felt Pads
- Kuusiokoloavain
- Kokoamisohjeet (tämä käyttöohje)
4. Asennus ja kokoonpano
The pamo Industrial Design Garment Rack features an easy screw system for straightforward assembly. No drilling into walls or floors is required for the freestanding model.
4.1. Valmistelu
- Tyhjennä tilava alue kokoamista varten.
- Lay out all components and identify them using the parts list.
- Ensure the floor is protected, especially if assembling on delicate surfaces.
4.2. Kokoamisvaiheet
- Kiinnitä jalat: Screw the floor flanges/feet onto the bottom ends of the vertical pipes. Ensure they are tightened securely. Apply the non-slip felt pads to the bottom of the flanges.
- Connect Vertical and Horizontal Pipes: Begin by connecting the lower horizontal pipes to the vertical pipes using T-connectors. Hand-tighten initially.
- Rakenna kehys: Continue connecting vertical and horizontal pipes using T-connectors and elbow connectors as per the specific design of your LAS 1 Standard model. Refer to the detailed diagrams provided in the included paper instructions for your specific configuration.
- Suojatut yhteydet: Once the basic frame is assembled, use the provided hex key to firmly tighten all screw connections. Do not overtighten, but ensure all joints are snug to prevent wobbling.
- Lopullinen sijoitus: Carefully move the assembled garment rack to its desired location. The non-slip felt pads will protect your floor.
Figure 4.1: The easy screw system allows for straightforward assembly.
Figure 4.2: Detail of pipe clamping and floor protection with rubber feet.
5. Käyttöohjeet
The pamo Industrial Design Garment Rack is designed for organizing and storing clothing. Its robust construction allows for significant weight capacity.
- Ripustettavat vaatteet: Use standard hangers to hang garments on the horizontal pipes. Distribute weight evenly to maintain stability.
- Painokapasiteetti: The rack has a maximum load capacity of 175 pounds (60 kg). Avoid concentrating heavy items in one area.
- Vapaasti seisova käyttö: This model is designed to be freestanding. Ensure it is placed on a level surface. The non-slip felt pads provide stability and floor protection.
- Laajennettava järjestelmä: The modular design allows for future expansion or reconfiguration. Additional components can be purchased separately to adapt the rack to changing needs.
Figure 5.1: The modular system allows for expansion and customization.
6. Huolto
Proper care will ensure the longevity and appearance of your garment rack.
- Puhdistus: Pyyhi metallipinnat pehmeällä, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the powder-coated finish.
- Tarkastus: Periodically inspect all connections and joints for tightness. Re-tighten any loose screws using the hex key.
- Floor Pads: Check the non-slip felt pads for wear and tear. Replace them if they become damaged to continue protecting your floor.
Figure 6.1: The MatteGuard coating provides a durable, scratch-resistant surface.
7. Vianmääritys
Jos kohtaat ongelmia vaatetelineesi kanssa, tutustu seuraaviin yleisiin ongelmiin ja ratkaisuihin.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Teline on heiluva/epävakaa | Loose connections; uneven floor; overloaded | Tighten all screw connections. Ensure the rack is on a level surface. Redistribute weight or reduce load. |
| Pipes do not fit together | Incorrect orientation; debris in threads | Ensure pipes are aligned correctly. Check threads for any obstructions and clear if necessary. |
| Naarmuja lattiassa | Missing or worn felt pads | Ensure felt pads are properly attached to all feet. Replace worn pads if necessary. |
8. Tekniset tiedot
| Merkki | pamo |
| Malli | LAS 1 Standard (P-01-087) |
| Väri | Musta |
| Materiaali | Metal (Solid steel tubes, malleable cast iron fittings) |
| Viimeistelytyyppi | Powder Coated (MatteGuard) |
| Tuotteen mitat (K x L x S) | Noin 194 cm x 99 cm x 60 cm |
| Asennustyyppi | Vapaasti seisova |
| Kuormituskapasiteetti | 175 puntaa (60 kiloa) |
| Asennus vaaditaan | Kyllä |
| Erikoisominaisuudet | Easy to Install, Non-slip Felt Pads, Scratch-resistant |
Figure 8.1: Product dimensions for the LAS 1 Standard Garment Rack.
9. Takuu ja tuki
For information regarding product warranty, please refer to the documentation provided with your purchase or visit the official pamo website. If you require assistance with assembly, have questions about product functionality, or need to report a missing/damaged part, please contact pamo customer support.
Yhteystiedot: Please refer to the contact details provided on the product packaging or the official pamo websivustolta ajantasaisimmat tukitiedot.