SRAM Eagle AXS Pod Controller User Manual

Johdanto

This manual provides essential information for the proper installation, operation, and maintenance of your SRAM Eagle AXS Pod Controller. Please read this manual thoroughly before using the product to ensure safe and efficient performance.

Figure 1: SRAM Eagle AXS Pod Controller

The SRAM Eagle AXS Pod Controller is an electronic bicycle shifter designed for precise and reliable gear changes. It features a compact design and intuitive controls for an enhanced riding experience.

Turvallisuustiedot

• Always ensure all components are securely fastened before riding. Loose components can lead to loss of control and injury.
• Refer to a qualified bicycle mechanic for installation if you are unsure about any steps.
• Regularly inspect the controller and associated components for wear or damage. Replace worn or damaged parts immediately.
• Keep the controller and battery away from extreme temperatures and moisture.
• Do not attempt to disassemble or modify the controller, as this may void the warranty and cause malfunction.

Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat:

• SRAM Eagle AXS Pod Controller (1 unit)
• Asennus Clamp (for handlebar attachment)
• CR2032-paristo (esiasennettu tai erillinen)
• Pikaopas (jos sovellettavissa)

Asennus

1. Installation on Handlebar

1. Paikannus: Determine the optimal position for the controller on your handlebar. The clamp-on mount allows for flexible placement.
2. Liite: Avaa kiinnitysliitinamp and place it around the handlebar. Secure the clamp using the provided bolt and a T25 Torx wrench. Tighten to the manufacturer's specified torque (refer to the quick start guide or SRAM's official documentation for exact torque specifications).
3. Suunta: Adjust the angle of the controller for ergonomic access to the buttons.

Figure 2: Controller mounted on handlebar

The image shows the SRAM AXS Pod Electronic Controller securely mounted on a bicycle handlebar, illustrating its compact design and button placement.

2. Pairing with AXS Components

The AXS Pod Controller must be paired with your SRAM AXS derailleur and other AXS components.

1. Wake Up Components: Ensure all AXS components (derailleur, dropper post if applicable) are awake by pressing their AXS buttons briefly.
2. Siirry pariliitostilaan: Press and hold the AXS button on the derailleur until the LED flashes slowly.
3. Pariohjain: Press and hold the AXS button on the Pod Controller until its LED flashes slowly.
4. Vahvista pariliitos: Once both LEDs flash rapidly and then turn solid green, the components are paired. Repeat for any other AXS components.

Figure 3: SRAM AXS Pod Controller

This image displays the SRAM AXS Pod Controller, highlighting its design and the AXS branding, indicating its compatibility within the SRAM AXS ecosystem.

Käyttöohjeet

Vaihteet

The AXS Pod Controller features two distinct buttons for shifting. By default, the upper button shifts to a larger cog (easier gear), and the lower button shifts to a smaller cog (harder gear).

• Up-shift (Easier Gear): Paina ylempi painike lyhyesti.
• Down-shift (Harder Gear): Paina alempi painike lyhyesti.
• Multi-shift: Hold down either button to shift multiple gears in succession. The number of gears shifted can be customized via the AXS app.

Customization with AXS App

For advanced customization, download the SRAM AXS app on your smartphone. The app allows you to:

• Reverse shift logic (upper button for harder gear, lower for easier).
• Adjust multi-shift settings (number of gears shifted per hold).
• Monitor battery levels of all AXS components.
• Update firmware for improved performance and features.

Huolto

Puhdistus

• Pyyhi ohjain mainoksellaamp liinalla lian ja noen poistamiseen. Vältä voimakkaiden kemikaalien tai hankaavien puhdistusaineiden käyttöä.
• Do not spray water directly into the controller or its buttons.

Akun vaihto

The AXS Pod Controller uses a CR2032 coin cell battery.

1. Akkulokeron avaaminen: Locate the battery cover on the underside of the controller.
2. Irrota vanha akku: Use a small coin or flat-head screwdriver to gently open the cover and remove the old CR2032 battery.
3. Aseta uusi paristo: Aseta uusi CR2032-paristo positiivinen (+) puoli ylöspäin.
4. Turvallinen kansi: Replace the battery cover and ensure it is securely closed to maintain water resistance.

Huomautus: Hävitä käytetyt paristot vastuullisesti paikallisten määräysten mukaisesti.

Vianetsintä

Tekniset tiedot

Takuu ja tuki

SRAM-tuotteilla on rajoitettu takuu materiaali- ja valmistusvirheiden varalta. Tarkemmat takuuehdot löytyvät SRAMin virallisesta käyttöohjeesta. websivustolla tai tuotteen mukana toimitetussa takuukortissa.

For technical support, troubleshooting assistance, or to locate an authorized service center, please visit the official SRAM support page: www.sram.com/en/sram/support