JNOEEDWN 10-Inch Car Frame Fascia Adapter and Canbus Decoder Kit for Nissan Terra NAVARA 2021 Android Radio - Instruction Manual

1. Johdanto

This instruction manual provides detailed guidance for the installation and operation of the JNOEEDWN 10-inch Car Frame Fascia Adapter and Canbus Decoder Kit. This kit is designed to facilitate the seamless integration of a 10-inch Android radio into the dashboard of Nissan Terra and NAVARA 2021 models, ensuring a factory-like fit and maintaining vehicle functionality through the included Canbus decoder.

Please read this manual thoroughly before beginning installation to ensure correct setup and optimal performance.

2. Pakkauksen sisältö

Varmista, että pakkauksessasi on kaikki alla luetellut osat:

• 10-inch Car Frame Fascia Adapter (ABS Plastic)
• Canbus-dekooderilaatikko
• Wiring Harness for Android Radio Integration

Kuva 2.1: Complete kit including the 10-inch frame, Canbus decoder, and wiring harness.

3. Asennus ja asennus

Yhteensopivuus: This kit is specifically designed for Nissan Terra and NAVARA 2021 models. Ensure your vehicle matches this specification before proceeding.

Tarvittavat työkalut: Basic automotive trim removal tools, screwdriver set, wire strippers/crimpers (if custom wiring is needed).

3.1. Preparing the Dashboard

1. Carefully remove the existing factory radio and dashboard trim panels. Refer to your vehicle's service manual for specific instructions on trim removal to avoid damage.
2. Disconnect all wiring harnesses from the factory radio.

3.2. Installing the 10-inch Fascia Frame

The ABS plastic frame panel is designed for a seamless contour fit.

Kuva 3.1: Sivu view of the fascia frame, highlighting mounting tabs.

1. Mount your 10-inch Android radio into the new fascia frame. Ensure it is securely fastened using the radio's mounting screws.
2. Position the assembled radio and frame into the dashboard opening. The frame's design allows for a precise fit.

Kuva 3.2: Example of the 10-inch fascia frame with an Android radio integrated into the vehicle dashboard.

3.3. Canbus Decoder and Wiring Harness Connection

The Canbus decoder and wiring harness are crucial for integrating the Android radio with your vehicle's electrical system and retaining factory features.

1. Connect the provided wiring harness to the back of your Android radio.
2. Connect the vehicle-specific end of the wiring harness to the factory wiring harness previously disconnected from the OEM radio.
3. Integrate the Canbus decoder box into the wiring harness as indicated by the connectors. Ensure all connections are secure. The Canbus decoder translates vehicle data (e.g., steering wheel controls, door status, reverse gear signal) for the Android radio.
4. Before fully reassembling the dashboard, perform a preliminary power-on test of the Android radio and verify basic functions (power, audio, steering wheel controls, reverse camera if applicable).

4. Operating the Canbus Decoder

The Canbus decoder operates automatically once correctly installed and connected. It acts as an interface between your vehicle's Canbus system and the Android radio.

• Ohjauspyörän säätimet: The decoder enables your Android radio to recognize and utilize the factory steering wheel control buttons. Configuration may be required within your Android radio's settings menu.
• Ajoneuvon tiedot: Depending on your Android radio's capabilities and the vehicle's Canbus data, the decoder may transmit information such as door open status, climate control settings, or vehicle speed to the radio display.
• Peruutusvaihteen signaali: Provides the necessary signal to automatically switch the Android radio to a reverse camera display when the vehicle is put into reverse gear.

Refer to your Android radio's user manual for specific instructions on configuring Canbus settings and accessing vehicle information.

5. Huolto

The JNOEEDWN Car Frame Fascia Adapter and Canbus Decoder Kit requires minimal maintenance.

• Puhdistus: The ABS plastic frame can be cleaned with a soft, damp liinalla. Vältä hankaavia puhdistusaineita tai liuottimia, jotka voivat vahingoittaa pintaa.
• Liitännät: Periodically check that all wiring connections remain secure, especially if experiencing intermittent issues.
• Ohjelmistopäivitykset: The Canbus decoder itself typically does not require software updates. Any updates would be for the Android radio unit.

6. Vianmääritys

Jos asennuksen aikana tai sen jälkeen ilmenee ongelmia, katso seuraavat yleiset ongelmat ja ratkaisut:

• Ei virtaa Android-radiolle:
  • Check all power connections from the wiring harness to the radio and vehicle.
  • Tarkista radion tai lisävarusteiden virtalähteeseen liittyvät ajoneuvon sulakkeet.
  • Ensure the Canbus decoder is correctly connected, as it often manages power signals.
• Ohjauspyörän säätimet eivät toimi:
  • Confirm the Canbus decoder is properly connected and recognized by the Android radio.
  • Access the Android radio's settings (usually under "Car Settings" or "SWC Settings") to configure or learn the steering wheel buttons.
  • Ensure the correct Canbus protocol is selected in the Android radio's settings, if applicable.
• Ei ääntä tai ääni katkeilee:
  • Tarkista kaikkien kaiuttimien johtojen liitännät.
  • Verify the Android radio's audio settings.
  • Ensure the vehicle's amplifier (if present) is receiving the correct turn-on signal from the Canbus decoder/radio.
• Ohjaamon kehyksen huono istuvuus:
  • Double-check that the kit is compatible with your exact Nissan Terra/NAVARA 2021 model.
  • Ensure no cables are obstructing the frame's seating within the dashboard.

If problems persist, consult a professional car audio installer or contact JNOEEDWN customer support.

7. Tekniset tiedot

8. Takuu ja tuki

Tämän tuotteen erityisiä takuutietoja ei ole annettu tässä käyttöoppaassa. Katso lisätietoja tuotteen pakkauksesta tai jälleenmyyjän ohjeista. websivustolta tietoa takuusta ja sen ehdoista.

For technical support, installation assistance, or inquiries about replacement parts, please contact JNOEEDWN customer service through the retailer where the product was purchased or visit the official JNOEEDWN websivusto (jos saatavilla).

When contacting support, please have your product model number (WP-E09-13) and purchase details readily available.