1. Johdanto
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of the BDPQKPDV Motorized Brass Valve, including models VC6013 and VC4013. Please read this manual thoroughly before attempting any installation or operation to ensure proper function and to prevent damage or injury.
1.1 Turvallisuustiedot
- Katkaise aina virta ennen asennusta, huoltoa tai vianmääritystä.
- Varmista, että kaikki sähköliitännät ovat paikallisten määräysten ja määräysten mukaisia.
- Asennuksen saa suorittaa pätevä henkilöstö.
- Älä ylitä ilmoitettua tilavuuttatage- tai paineluokitukset.
- Käytä asianmukaisia henkilönsuojaimia asennuksen ja huollon aikana.
2. Tuote ohiview
The BDPQKPDV Motorized Brass Valve is designed for controlling the flow of water in various applications. It features a durable brass body and an electric actuator for reliable operation. This series includes 2-way and 3-way configurations, with models like VC6013 (three lines, two controls) and VC4013 (three lines, one control), operating on 220VAC power.
Kuva 1: BDPQKPDV Motorized Brass Valve body. This image shows the robust brass construction of the valve, with the spring-loaded mechanism visible at the top, indicating its motorized function. Ports are visible on the sides for connection to plumbing.
3. Tekniset tiedot
| Mallinumerot | VC6013 (3 lines, 2 controls), VC4013 (3 lines, 1 control) |
| Valvontamenetelmä | Kytkimen tyyppi |
| Voitage | 220VAC (±10%) |
| Virrankulutus | 6 watts (during actuation) |
| Toiminnan aika | 6 seconds (at 60Hz) |
| Kaapeliliitäntä | 0.5m cable included |
| Port Size (Current Variant) | DN15 (1/2 inch) |
| Media | Vesi |
| Materiaali | Messinki |
| Median lämpötila | Normaali lämpötila |
| Paine | Matala paine |
| Tuotteen paino | 1.76 unssia (noin 50 g) |
| Pakkauksen mitat | 1.18 x 0.79 x 0.39 tuumaa (noin 3 x 2 x 1 cm) |
4. Asennus ja asennus
4.1 Mounting the Valve Body
- Varmista, että järjestelmä on paineeton ja tyhjennetty ennen asennusta.
- Identify the inlet and outlet ports on the valve body. An arrow on the valve body typically indicates the direction of flow.
- Thread the valve into the plumbing system. Use appropriate thread sealant (e.g., PTFE tape) to ensure a watertight connection. Do not overtighten.
- Varmista, että venttiili on asennettu helposti saavutettavaan paikkaan tulevaa huoltoa varten.
4.2 Sähköjohdot
The valve operates on 220VAC. Wiring configurations vary between VC6013 (three lines, two controls) and VC4013 (three lines, one control). Refer to the specific wiring diagram provided with your valve model for precise connections.
- General Wiring Precaution: Always ensure power is OFF at the circuit breaker before making any electrical connections.
- Connect the power supply (220VAC) to the designated terminals on the actuator.
- For switch-type control, connect the control wires to a suitable switch or control system.
- Varmista, että kaikki liitännät ovat tukevat ja eristettyjä oikosulkujen välttämiseksi.
5. Käyttöohjeet
The BDPQKPDV Motorized Brass Valve uses a switch-type control method. When the control signal is applied, the actuator will move the valve to its open or closed position. The action time for a full cycle (open to close or close to open) is approximately 6 seconds at 60Hz.
- To Open/Close the Valve: Activate the connected switch or control system. The actuator will energize and move the valve to the commanded position.
- The valve will hold its position once the actuation is complete and power is removed from the motor (power is only consumed during the 6-second actuation period).
- Observe the flow indicator (if present) or listen for the change in flow to confirm valve operation.
6. Huolto
Regular maintenance ensures the longevity and reliable operation of your motorized brass valve.
- Vuositarkastus: Periodically inspect the valve for any signs of leaks, corrosion, or physical damage.
- Sähköliitännät: Check electrical connections for tightness and signs of wear or overheating.
- Actuator Function: Test the valve's operation periodically to ensure the actuator moves smoothly and completes its full travel.
- Puhdistus: Keep the exterior of the valve and actuator clean and free from dust or debris. Do not use harsh chemicals that could damage the brass or plastic components.
- Ei käyttäjän huollettavia osia: The internal components of the actuator and valve body are not designed for user servicing. Do not attempt to disassemble the unit beyond what is described in this manual.
7. Vianmääritys
If you encounter issues with your BDPQKPDV Motorized Brass Valve, refer to the following common problems and solutions:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Valve does not operate (no movement) | No power to actuator; faulty wiring; actuator failure. | Check power supply (220VAC). Verify all wiring connections are secure. If power is present and wiring is correct, the actuator may need replacement. |
| Valve operates slowly or partially | Alhainen tilavuustage; obstruction in valve; actuator malfunction. | Verify stable 220VAC supply. Check for debris in the pipeline (requires system shutdown and valve removal). If issues persist, actuator may be faulty. |
| Vuoto venttiilin rungosta | Improperly sealed connections; damaged valve body. | Ensure pipe threads are properly sealed with PTFE tape and tightened correctly. If the valve body is damaged, it must be replaced. |
Jos vianmääritysohjeet eivät ratkaise ongelmaa, ota yhteyttä asiakastukeen saadaksesi lisäapua.
8. Takuu ja tuki
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact BDPQKPDV customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Yhteystiedot: Katso valmistajan virallinen webKatso ajantasaisimmat yhteystiedot sivustolta tai tuotepakkauksesta.