KAP X330 Langaton WiFi-toistinreititin Käyttöohje

1. Johdanto

This manual provides detailed instructions for setting up, operating, and maintaining your YOOSEE KAP X330 Wireless WiFi Repeater Router. Please read this manual carefully before using the device to ensure optimal performance, extended network coverage, and safety. This device is designed to easily expand the range of your existing WLAN network or create a new access point.

2. Tuote ohiview

2.1 Tärkeimmät ominaisuudet

• Extends the range of your WLAN network easily.
• Provides Internet access for computers located at the edge or outside the range of your main access point.
• Supports both Wireless Repeater Mode and standard Access Point (AP) Mode.
• Utilizes WLAN 802.11N for high-speed wireless access.
• Compatible with 802.11G (54 Mbps) and 802.11B (11 Mbps) standards.
• Operates on the 2.4GHz WLAN frequency.
• Ensures maximum WLAN network security with WPA2, WPA, and WEP (64/128-bit) encryptions.
• Features integrated antennas for compact design.
• Bivolt (110V / 220V) power input for versatile use.
• Supports WPS (Wi-Fi Protected Setup) for easy connection.

2.2 Pakkauksen sisältö

• 1x YOOSEE KAP X330 Wireless WiFi Repeater Router
• 1x käyttöopas

2.3 Fyysinen kuvaus

The KAP X330 is a compact, white device designed to plug directly into a wall outlet. It features indicator lights on the front panel and an Ethernet port on the side for wired connections.

Figure 2.1: YOOSEE KAP X330 Wireless Repeater in its retail packaging and as a standalone unit. The packaging highlights its 'KAP-X330 Wireless Extender' name and 'More range for every WLAN network' slogan. The device itself is white with indicator lights and an Ethernet port visible.

Figure 2.2: A closer look at the YOOSEE KAP X330 Wireless Repeater, emphasizing its design and features. It shows the device plugged into an outlet, with indicator lights illuminated. Insets highlight the side view with an Ethernet port, the power plug, and a reset button, along with a prominent WiFi signal icon.

3. Asennusopas

3.1 Virran kytkeminen päälle

1. Plug the KAP X330 into a standard electrical outlet within the range of your existing WiFi network (for Repeater Mode) or near your wired internet source (for AP Mode).
2. Wait for the power indicator light to turn on, indicating the device is ready.

3.2 Yhteystilat

The KAP X330 supports two main operational modes:

• Toistintila: Laajentaa olemassa olevan langattoman verkon peittoaluetta.
• AP (tukiasema) -tila: Creates a new wireless network from a wired Ethernet connection.

3.3 Configuration Steps (Repeater Mode)

1. Yhdistä toistimeen: On your computer or smartphone, connect to the repeater's default WiFi network (SSID usually starts with 'Wireless-N' or similar, without a password).
2. Pääsy Web Käyttöliittymä: Avaa a web selain ja anna oletus-IP-osoite (esim. 192.168.1.1 or 192.168.10.1) or the default domain name (e.g., repeater.net). Refer to the label on the device or the quick start guide for the exact address.
3. Kirjaudu sisään: Enter the default username and password (commonly 'admin' for both).
4. Valitse toistintila: On the setup page, select 'Repeater Mode'.
5. Verkkojen etsiminen: The device will scan for available wireless networks. Select your home WiFi network from the list.
6. Anna salasana: Enter the password for your home WiFi network.
7. Laajennetun SSID:n määrittäminen (valinnainen): You can choose to keep the same SSID as your main network or create a new one (e.g., 'YourNetwork_EXT').
8. Tallenna asetukset: Click 'Apply' or 'Save'. The repeater will restart.
9. Yhdistä uudelleen: After the restart, connect your devices to the extended WiFi network.

3.4 Configuration Steps (AP Mode)

1. Ethernet-kaapelin liittäminen: Connect an Ethernet cable from your router or modem to the LAN/WAN port on the KAP X330.
2. Yhdistä toistimeen: On your computer or smartphone, connect to the repeater's default WiFi network (SSID usually starts with 'Wireless-N' or similar, without a password).
3. Pääsy Web Käyttöliittymä: Avaa a web selain ja anna oletus-IP-osoite (esim. 192.168.1.1 or 192.168.10.1) or the default domain name (e.g., repeater.net).
4. Kirjaudu sisään: Enter the default username and password (commonly 'admin' for both).
5. Valitse AP-tila: Valitse asetussivulla 'AP-tila'.
6. Configure New Network: Aseta uusi SSID (verkon nimi) ja vahva salasana uudelle langattomalle verkollesi.
7. Tallenna asetukset: Napsauta 'Käytä' tai 'Tallenna'. Laite käynnistyy uudelleen.
8. Yhdistä uudelleen: After the restart, connect your devices to the newly created WiFi network.

3.5 WPS Setup (Wi-Fi Protected Setup)

WPS allows for a quick and easy connection to your main router without needing to enter the password manually.

1. Plug in the KAP X330 and wait for it to power on.
2. Paina pääreitittimesi WPS-painiketta.
3. Within two minutes, press the WPS button on the KAP X330.
4. The devices will automatically connect and configure the repeater. The signal indicator lights on the repeater should show a strong connection.

4. Käyttö

4.1 Merkkivalot

The KAP X330 features several indicator lights on its front panel to provide status information:

• Virran merkkivalo: Ilmaisee, onko laite päällä.
• WLAN/WiFi LED: Shows wireless activity and connection status.
• LAN/WAN-merkkivalo: Ilmaisee Ethernet-portin toimintaa.
• Signaalin voimakkuuden LEDit: (If present) Indicate the strength of the signal received from the main router in Repeater Mode. More lights usually mean a stronger signal.

4.2 Optimaalinen sijoittelu

For best performance in Repeater Mode, place the KAP X330 halfway between your main router and the area where you need extended WiFi coverage. Avoid placing it near large metal objects, concrete walls, or other devices that emit radio frequency interference (e.g., microwaves, cordless phones).

5. Huolto

5.1 Puhdistus

To clean the device, unplug it from the power outlet. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosol sprays.

5.2 laiteohjelmistopäivitystä

Periodically check the YOOSEE official website for firmware updates. Firmware updates can improve performance, add new features, or fix bugs. Follow the instructions provided with the firmware update package carefully.

6. Vianmääritys

6.1 Ei internetyhteyttä asennuksen jälkeen

• Ensure the repeater is receiving a strong signal from your main router (check signal strength LEDs).
• Verify that you entered the correct WiFi password for your main network during setup.
• Try restarting both your main router and the KAP X330.
• If in AP Mode, ensure the Ethernet cable is securely connected and your main router is providing internet.

6.2 Heikko signaali tai hidas nopeus

• Relocate the KAP X330 closer to your main router, ensuring it's still within the desired coverage area.
• Vältä fyysisiä esteitä, kuten paksuja seiniä tai suuria metalliesineitä.
• Tarkista muiden elektronisten laitteiden aiheuttama häiriö.

6.3 Ei pääsyä Web Käyttöliittymä

• Ensure your device is connected to the repeater's WiFi network (or via Ethernet if in AP mode).
• Verify the IP address or domain name entered in the browser is correct.
• Tyhjennä selaimesi välimuisti tai kokeile toista selainta.
• Poista tilapäisesti käytöstä kaikki VPN- tai palomuuriohjelmistot tietokoneellasi.

6.4 Tehdasasetusten palautus

Jos kohtaat jatkuvia ongelmia tai unohdat kirjautumistietosi, voit tehdä tehdasasetusten palautuksen:

1. With the device powered on, use a paperclip or a thin object to press and hold the reset button (usually located in a small pinhole) for about 5-10 seconds.
2. Vapauta painike, kun merkkivalot vilkkuvat tai laite käynnistyy uudelleen.
3. The device will revert to its factory default settings, and you will need to reconfigure it.

7. Tekniset tiedot

8. Takuu ja tuki

For warranty information and technical support, please refer to the contact details provided by your retailer or visit the official YOOSEE websivusto. Säilytä ostokuitti ostotodistuksena takuuvaatimuksia varten.